* Metrics Service configuration incorrect
--metrics-push-enabled is not eabling metrics push and --metrics-enabled
is enabling push instead of polling.
* formatting
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
fixes NC-1737 by adding an option dependency mechanism for "enabled" options
This mechanism is aimed at preventing the use of options if the associated
service is disabled. This is not a generic system as our need is simple here.
But in future version of PicoCLI some options dependency mechanism may be
implemented that could replace this.
See https://github.com/remkop/picocli/issues/295
Our current mechanism apply to p2p, rpc (http+ws), mining, privacy and metrics.
It logs a warning wherever some options are used that require another one to be enabled.
Also renamed inconsistent isRpcHttpEnabled option variable and moved
--privacy-enabled option to be on top of other privacy options.
injects a Logger in PantheonCommand constructor to log and also provides injection capabilities for a mock in tests.
adds unit tests
updates tests logger name to TEST_LOGGER to prevent confusion with the mock
remove --max-trailing-peers after merge with master where it was deleted
updated rules for metrics
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
* Don't overload `--metrics-host` and `--metrics-port` for push mode, instead add '--metrics-push-enabled' , `--metrics-push-host` and `--metrics-push-port`, rename `--metrics-prometheus-job` to `--metrics-push-prometheus-job` and remove `--metrics-mode`
* Show an error if both metrics and metrics-push are enabled.
* Allow shutdown if we cannot communicate with the Push Gateway.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
fixed NC-2206 remove --max-trailing-peers
Replaces the option by a constant.
Removes option test.
Doc update
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
* create permissioning config from toml file
* added CLI options for separately enabling node and account permissioning
* moved check for bootnodes on whitelist out of CLI
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
* created fixed difficulty calculator.
* Use fixed calculator at the right spot.
* Use fixeddifficulty in the main dev.json file.
* Removed development difficulty calculators.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
Messages which originate with the current node are logged in the
gossiper such that if a remote peer sends a packet which originated
from the local back to the local node, it should not go back out
again.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
fixes NC-2120 --discovery-enabled option refactoring
now able to have --discovery-enabled option with true as default
and --discovery-enabled=true or --discovery-enabled=false on CLI
and discovery-enabled=true or discovery-enabled=false in YAML config file.
updates doc
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
fixes NC-2026 adds a `--network` option instead of separated options
Networks are now defined using a `--network` option that takes the case insensitive
name of an enum values as input : MAINNET, RINKEBY, ROPSTEN, GOERLI, DEV
These presets are a set of network-id, genesis file and boonodes list.
If the `--genesis-file` is provided with a valid JSON genesis file,
Pantheon uses it instead of the default network. An empty bootnodes list is then
the default value and network id is the chain id found in the genesis file.
`--network-id` and `--bootnodes` options can override these defaults.
You can of course also override the `--network-id` and `--bootnodes` for a
predefined known network (using `--network`).
User have no reason to set `--network` and `--genesis-file` options at the same
time that would lead to misunderstandings so we raise an error to prevent both
options to be defined at the same time on the command line.
Also fixes NC-2189 renaming --private-genesis-file to --genesis-file
Updates a lot of doc according to the options changes
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
fixes NC-2104 remove Clique and iBFT defaults and centralise default values
As toString() is used to display default values in CLI description and this is
not used anywhere else for RpcApi objects, it may have been used for debug long
ago, but now we can use the simple string value as return from toString.
Then we are able to use the DEFAULT_JSON_RPC_APIS constant as default value
directly instead of hard coded defaults string in option that was probably used
because previous toString was not outputting correct representation. It may be
interesting to comment when some does this sort of hack.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
Makes Synchronizer responsible for deciding if it has enough peers or not rather than ProtocolManager.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
* Add Privacy Cli options
* Wire up Precompiled contract configuration to Protocol Spec
* Rename createDefault to noPrivacy to indicate the defaults.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
* Add support for initiating fast sync to DefaultSynchronizer, starting full sync once that completes.
* Wait for a minimum number of peers to be available before starting fast sync.
* Select pivot block.
* Fetch the pivot block header.
* Ensure that a majority of peers (which have the pivot block) agree on the block.
* Pull isRetryingError and assignPeer up to AbstractRetryingPeerTask so it can be reused.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
Sometimes metrics are hard to poll (docker containers with varying ip
addresses). Because of that the push gateway exists. This extends the
metrics system to support push or pull mode for metrics (but not both
at the same time).
Three new flags
`--metrics-mode=`<`push`|`pull`> - Whether we are in pull mode (the default) where
prometheus is expected to poll or push mode where pantheon pushes to
a push gateway.
`--metrics-push-interval=`<_integer_> the frequency, in seconds, between pushes to
the push gateway. Only relevant in push mode
`--metrics-prometheus-job=`<_string_> The name of the job to report in the push gateway
Also, `--metrics-host=` and `--metrics-port=` gain new meaning in push mode. Instead of the
server they are opening up it is the host and the port of the push gateway it should push to.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
* added test and DSL for node with --no-discovery
* reversed boolean for discovery
* changed to Boolean and arity = 1
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
Previously, IBFT only validated the header of the block on reception
of a proposal. However in order to minimise the risk of a "bad block"
being detected after a PreparedCertificate being created, it has been
decided to validate the whole block (i.e. exercise the transactions,
process the block and ensure hashes etc line up with the header).
There is still some (minor) risk of a failed block import, however
it is substantially reduced.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
Constructor of the RoundChangeManager now accepts a
RoundChangeMessageValidator rather than creating it from inputs.
This removes complexity from this class, pushes creation back to the
validator factory, and simplifies the IbftBlockHeightManagerFactory.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
* Implement a new endpoint for privacy (#PRIV-5)
Create new package for implement privacy isolate, add new EeaSendSawTransaction.java and EeaSendSawTransactionTest.java
Create a new RpcApis category: EEA
Make changes to expose the endpoint in JsonRpcMethodsFactory.java, RpcApis.java and PatheonCommand.java
Create basic unit tests to call and get the response of the endpoint and call manualy and get the response
* Fix tests build failure and run gradlew spotlessApply
Also resolve merge duplication
* Remove the EEA from default APIs
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
node-priveate-key is a path and not a key. The everything_config.toml
should blatently look like a valid path
The old value was a valid path, but gave the wrong impression.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
* Implemented list/add/remove accounts from whitelist
* Including account whitelist methods in the JSON-RPC API
* Fixing json rpc response for eth_sendrawTransaction with account not authorized
* Refactoring TransactionPool account whitelist logic
* Acceptance test for accounts whitelist
* Errorprone
* Fixed account nonce tracking in ATs
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
* Fix Array Configurable CLI options
--host-whitelist and --rpc-cors-origins could not be configured as
a TOML array. The underlying PicoCLI issues were resolved with
revamped property types that act like Collections.
A "configure everything" test is added that creates a TOML file that
requires all CLI options to be configurable and configured in
a new everything_config.toml test file.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
For the import command pay attention to the --metrics-enabled and
--metrics-listen CLI flags and run the metrics server if requested
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
A service like the JSON-RPC service is opened up, only serving /metrics
requests in a file format for prometheus.
New CLI flags are --metrics-enabled and --metrics-listen, just like the
--rpc and --ws variants of the same.
--host-whitelist is respected the same as the JSON-RPC endpoint.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
tmohay
Adrian Sutton
Danno Ferrin
Nicolas MASSART
Lucas Saldanha
Chris Mckay
mark-terry
Sally MacFarlane
Rob Dawson
Puneetha Karamsetty
mbaxter
Vinicius Stevam
Jason Frame