This implements the encoding/decoding logic and because it's backwards
compatible we can introduce it immediately. You can see that some of
the typed-transaction specific encoding/decoding logic is tested where
there are EIP-1559 encoding/decoding tests but there'll be more tests
included in the EIP-2930 PR.
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
* expose epochCalculator to MiningCoordinator
Signed-off-by: Edward Mack <ed@edwardmack.com>
* replace epochCalculator Function with interface
Signed-off-by: Edward Mack <ed@edwardmack.com>
* apply spotless, clean-up tests
Signed-off-by: Edward Mack <ed@edwardmack.com>
* cleanup comments, fix more tests
Signed-off-by: Edward Mack <ed@edwardmack.com>
* fixing failures from testing
Signed-off-by: Edward Mack <ed@edwardmack.com>
* modify dagSeed calculator to use epochCalculator
epochStartBlock to determine epoch start block based on current epoch
length.
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add epochCalculator to StratumConnectionTest
Signed-off-by: Edward Mack <ed@edwardmack.com>
* apply spotless
Signed-off-by: Edward Mack <ed@edwardmack.com>
* remove unnecessary comments
Signed-off-by: Edward Mack <ed@edwardmack.com>
* remove activation block from Ecip1099EpochCalculator
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add messages to IllegalArgumentExceptions, init epochCalculator
Signed-off-by: Edward Mack <ed@edwardmack.com>
* un-wrap private dagSeed method
Signed-off-by: Edward Mack <ed@edwardmack.com>
* fix typo
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add unit tests for epochStartBlock functions
Signed-off-by: Edward Mack <ed@edwardmack.com>
* remove unused field
Signed-off-by: Edward Mack <ed@edwardmack.com>
For every block produced and imported directly log the same information
we would get from other import paths.
* If this node produced the block, note that with "Produced" instead of
"Imported"
* Log the size of the pending transaction pool
* Only log IBFT rounds at INFO if they go past round 0, DEBUG otherwise.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Moves TransactionInvalidReason to top level so it can be accessed by
privacy code while also allowing the TransactionValidator to be
collapsed as it's only used on the permissionless side.
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
* #1066 Switched to use unprefixed hex strings for memory and stack values
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Disable flaky tests per Ben Burns(Yeti) request
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Revert last commit and enable ignored tests.
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1157 - updated to create 2 agents so that proper bonding can occur
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1162 - Updated test to mock the local peer PING packet creation so that the hash can be managed.
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Added admin_logsRepairCache end point
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Added admin_logsRepairCache end point
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Remove p2p network code per PR comments
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Updates from PR comments
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Spotless Apply fixes
Signed-off-by: David Mechler <david.mechler@consensys.net>
* PR updates
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Admin force cache refresh when called through end point per PR comments
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Pr updates
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Update changelog for 1.5.1
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Remove check for 0x prefix on addresses to match expectations
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Update graphql pending to allow for sorting of transactions
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Add Miner data endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Add Miner data endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Add Miner data endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Added tests for new miner endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 - PR updates
Signed-off-by: David Mechler <david.mechler@consensys.net>
* SpotlessApply updtes
Signed-off-by: David Mechler <david.mechler@consensys.net>
* SpotlessApply updtes
Signed-off-by: David Mechler <david.mechler@consensys.net>
Co-authored-by: David Mechler <davemec@users.noreply.github.com>
Created a new JSON-RPC method miner_changeTargetGasLimit allowing users
to change the targetGasLimit option while besu is running.
Co-authored-by: Terrence Cooke <terrence.s.cooke@gmail.com>
Co-authored-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
* Add genesis config parameter ecip1099Block
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add stub for epoch activation config
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add stubs for EtcBesuControllerBuilder
that will handle ECIP 1099 Colibrate Epoch Duration functionality
Signed-off-by: Edward Mack <ed@edwardmack.com>
* introduce EtcHashMinerExecutor
Signed-off-by: Edward Mack <ed@edwardmack.com>
* implement EtcHashMinerExecutor
Signed-off-by: Edward Mack <ed@edwardmack.com>
* remove ecip1099 genesis config option
Signed-off-by: Edward Mack <ed@edwardmack.com>
* apply spotless to code
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add test for Etc Hash epoch calculation
Signed-off-by: Edward Mack <ed@edwardmack.com>
* cleanup comments, apply spotless
Signed-off-by: Edward Mack <ed@edwardmack.com>
* make needed variables final
Signed-off-by: Edward Mack <ed@edwardmack.com>
* update changelog
Signed-off-by: Edward Mack <ed@edwardmack.com>
* refactor code to add epochCalculator to EthHash
As suggested in comment removed EtcHash series of classes to keep
existing controller.
Signed-off-by: Edward Mack <ed@edwardmack.com>
* use gas limit calculator
Signed-off-by: Edward Mack <ed@edwardmack.com>
* fix imports
Signed-off-by: Edward Mack <ed@edwardmack.com>
* run spotless apply
Signed-off-by: Edward Mack <ed@edwardmack.com>
* fix imports
Signed-off-by: Edward Mack <ed@edwardmack.com>
* fix comments
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add ecip1099Block option to asMap method
Signed-off-by: Edward Mack <ed@edwardmack.com>
GasLimitCalculator is now just an interface. This simplifies the logic
in what was previously GasLimitCalculator but is now
TargetingGasLimitCalculator.
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
* Prefer `EvmAccount` in interfaces and methods
* Rename `DefaultEvmAccount` to `WrappedEvmAccount`
* Move `UpdateTrackingAccount` to a top level class from an inner class
* Re-type `getTouchedAcounts()` to not use `UpdateTrackingAccount`
* Extract `WorldStateArchive` interface, rename old class
`DefaultWorldStateArchive`
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Move key referenceTest classes relating to reading the JSON data into a
"main" java package so that it can be included in other production
classes. Some classes were renamed to make their intent clearer. Other
smaller changes that bring classes in line with current coding
standards were done.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Upgrade to ErrorProne 2.4.0
* public constructors on abstract classes are removed
* Javadoc must have meaningfull documentation
* lambdas should not be variables
* Added to the list of confusing inner class names (Entry and Type)
* no assert keyword in tests
* Obsolete JDK classes produce errors now
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
- Implemented submitHashrate endpoint.
- Updated eth_hashrateEndpoint so that it returns the cumulative hashrate of all sealers if available. Otherwise it returns the local hashrate
- Added hashrate submission with Stratum1EthProxyProtocol and Stratum1Protocol
Signed-off-by: Karim TAAM <karim.t2am@gmail.com>
ProtocolContext uses a generic for the consensus state, which has a very
large footprint across the code to accomplish what it intends to
accomplish. For every call there are about 61 other lines per call that
need to be updated, over 1300 lines total.
Instead replace it with java.lang.Class#cast, which provides runtime
security, and use generics to provide the compile time sugar that
allows for chained methods of the appropriate type. Then remove its
(quite large) footprint from the rest of the code.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
* Add checks on the replacement of a transaction in the pool:
- reject EIP-1559 for pre-fork blocks
- accept both frontier and EIP-1559 transactions during phase 1
- reject frontier transactions after phase 2 is finalized
Signed-off-by: Abdelhamid Bakhta <abdelhamid.bakhta@consensys.net>
* The transaction gas price is computed when adding a transaction into the local pool using eth_sendRawTransaction JSON RPC endpoint. Transaction price must be computed properly depending on the type of the transaction.
For instance `shouldReplace` method of PendingTransactions must be updated to deal with EIP-1559 transactions.
- Updated `PendingTransactions` to add access to the chain header in order to retrieve the last base fee value.
- Updated `TransactionReplacementByPriceRule` to compute the transaction price depending on the type of the transaction (frontier or eip-1559).
- Added unit tests to cover all possible replacement scenarios.
Signed-off-by: Abdelhamid Bakhta <abdelhamid.bakhta@consensys.net>
Fix cases where the gas estimate is too low and causes the transaction to fail
Implementation of a strategy that will estimate the number of gas needed by a transaction
1 - Estimate the number of gas used by a transaction
2 - Estimate the number of gas necessary to add for each sub call present in a transaction (65/64^depth)
3 - Add the minimum gas required for operations that need it (SSTORE)
Signed-off-by: Karim TAAM <karim.t2am@gmail.com>
IbftRound has been updated to accept Signing errors (eg no signature supplier available) and
continue operating if possible.
This also catches failures in signing and ECDH Key agreement
creation during discovery and handshaking.
Signed-off-by: Trent Mohay <trent.mohay@consensys.net>
* Fix EIP-1559 block mining.
- Updated `AbstractBlockCreator` to set base fee to initial value if block is the fork block number.
- Updated `BlockHeaderBuilder` to populate base fee field.
- Updated `EthHash` to include base fee in hash computation if present in header.
Signed-off-by: Abdelhamid Bakhta <abdelhamid.bakhta@consensys.net>
* Handle legacy gas pool and EIP-1559 gas pool when mining blocks.
- Added `EIP1559` manager class in `ProtocolSpec` (defaulted to `Optional.empty()`).
- Updated `MainnetProtocolSpecs` EIP-1559 definition to set the `EIP1559` manager class.
- Updated `BlockTransactionSelector`
- Added `eip1559CumulativeGasUsed` field in `TransactionSelectionResults`.
- Updated `updateTransactionResultTracking` method to compute cumulative gas used according to `EIP-1559` rules.
- Updated `transactionTooLargeForBlock` method to compute gas remaining according to `EIP-1559` rules.
- Updated `blockOccupancyAboveThreshold` method to compute minimum block occupancy ratio according to `EIP-1559` rules.
Signed-off-by: Abdelhamid Bakhta <abdelhamid.bakhta@consensys.net>
* Update BlockTransactionSelector transaction gas price computation.
BlockTransactionSelector should compare transaction gas price to the min transaction gas price parameter according to EIP-1559 rules.
- Added `TransactionPriceCalculator` to `ProtocolSpec` (defaulted to `TransactionPriceCalculator.frontier()`.
- Created `minTransactionPriceInNextBlock` method in `BaseFee`.
- Removed useless constructor in `BaseFee`.
- Updated EIP-1559 protocol spec definition to set the correct transaction price calculator.
Signed-off-by: Abdelhamid Bakhta <abdelhamid.bakhta@consensys.net>
* Restore test generation of blocks.bin
Restore the ability to generate our blocks.bin as part of the build.
(a) a fixed start time was added
(b) nonces for blocks imported for test are deterministically chosen.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
* more readable test files
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Generally, byte[] -> Bytes of some form. Most of the changes are the
side effect of the type changes or chaning to the names of Tuweni
equivilant calls (getHexString->toHexString, etc).
UnformattedData -> Bytes
Log Topics went from Hash to Bytes32
Difficulty went to UInt256 to match core impl.
Quantity lost BinaryData and is just getValue() and toHexString()
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Remove the LogSeries object and replace it with a plain old List<Log>.
The subclass had two features beyond a simple list. First it would
aggregate the logs as they were added into a bloom filter, but that
bloom filter was never used.
Second it had a RLP encoding convenience method. In the few cases this
is used the RLP encoding is unwrapped.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
This was turned off a number of months ago because of long build times.
However it appears either because of code structure changes or fixed
errorprone that this finishes in a reasonable time now.
Code that violated this check is also fixed.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Add support for external GPU mining via the stratum protocol.
Three new CLI Options support this: `--miner-stratum-enabled`,
`--miner-stratum-host`, and `--miner-stratum-port`.
To use stratum first use the `--miner-enabled` option and add the
`--miner-stratum-enabled` option. This disables local CPU mining and opens up
a stratum server, configurable via `--miner-stratum-host` (default is
`0.0.0.0`) and `--miner-stratum-port` (default is 8008). This server supports
`stratum+tcp` mining and the JSON-RPC services (if enabled) will support the
`eth_getWork` and `eth_submitWork` calls as well (supporting `getwork` or
`http` schemes).
This is known to work with ethminer.
Signed-off-by: Antoine Toulme <antoine@lunar-ocean.com>
* [PAN-3023] Add command line option for target gas limit
Signed-off-by: cfelde <cfelde@cfelde.com>
* [PAN-3023] Add command line option for target gas limit
Signed-off-by: Christian Felde <cfelde@cfelde.com>
* [PAN-3023] Add command line option for target gas limit
Signed-off-by: Christian Felde <cfelde@cfelde.com>
* [PAN-3023] Add command line option for target gas limit
Signed-off-by: Christian Felde <cfelde@cfelde.com>
* adding in spdx-license-identifier & updated check for the same; removing license check from spotless
Signed-off-by: Joshua Fernandes <joshua.fernandes@consensys.net>
* Change CheckSpdxHeader to a task.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
Ratan (Rai) Sur
Edward Mack
David Mechler
Danno Ferrin
mark-terry
terrencecooke
Abdelhamid Bakhta
matkt
Trent Mohay
David Mechler
Antoine Toulme
mbaxter
Christian Felde
Josh Richardson
Joshua Fernandes
mbaxter