* avoid the edge case of long minimum value which gives a negative value when passed into abs()
* changed some Longs to long where they were statically intialized
* replace Lists.emptyList() with Collections.emptyList()
* removed unnecessary eq() invocation and resulting code smell
Signed-off-by: Sally MacFarlane <sally.macfarlane@consensys.net>
* Replace Log4j2 API with SLF4j API
* Replace explicit Log4J2 with util call
* Replace ThreadContext with Slf4J's MDC in test
* Inspect raw request parameter for admin_changeLogLevel
* Add errorprone rule to prevent the creation Log4j2 loggers
Signed-off-by: Diego López León <dieguitoll@gmail.com>
Co-authored-by: Sally MacFarlane <sally.macfarlane@consensys.net>
* use paris evm config in merge protocolschedule
catch exception on block persist so that it can be added to badBlocks
Signed-off-by: garyschulte <garyschulte@gmail.com>
Fix a bug that caused the worldstate to be missing during a fastsync and prevented it from completing properly
Signed-off-by: Karim TAAM <karim.t2am@gmail.com>
Remove the Gas object from the EVM and replace it with the primitive
long. This will have positive impact on short lived object garbage
collection stats, which at very high load causes significant performance
issues.
This also codifies EIP-4803 in the Besu EVM, limiting gas to a signed
64-bit long internally.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Change the unit test execution to use the Junit5 JUnitPlatform. This
allows for a mix of junit 4 and junit 5 tests and for a gradual
migration to junit 5 instead of a big bang. One class depended on
junit 4 exceptions and was updated. Two tests depending on
native libraries fail gracefully on mac (and only mac).
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Currently Besu has a limited support for sending NewPooledTransactionHashes messages, and other aspect related to reduce transactions synchronization traffic, described in the Ethereum Wire Protocol version 66.
Specifically:
Besu only uses NewPooledTransactionHashes for new local transactions, while it could be extended to any transaction added to the transaction pool
Besu does not limit the sending of the full transaction messages to a small fraction of the connected peers, and sends the new transaction hashes to all the remaining peers
This PR, extends eth/66 support and does some code refactoring, to remove some reduntant code and rename some classes to identify they are related to the NewPooledTransactionHashes message.
The main changes are:
Do not have a separate tracker for transaction hashes, since for them we can reuse PeerTransactionTracker, that tracks full transactions exchange history and sending queue with a peer. So PeerPendingTransactionTracker has been removed. --tx-pool-hashes-max-size is now deprecated and has no more effect and it will be removed in a future release.
When a new peer connects, if it support eth/6[56] then we send all the transaction hashes we have in the pool, otherwise we send the full transactions.
When new transactions are added to the pool, we send full transactions to peers without eth/6[56] support, or to a small fractions of all peers, and then we send only transaction hashes to the remaining peer that support eth/6[56]. Both transactions and transaction hashes are only sent if not already exchanged with that specific peer.
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
PR that adds the different request tasks necessary for the snapsync as well as a utility to manage the ranges of requests
Signed-off-by: Karim TAAM <karim.t2am@gmail.com>
Allow precompiled contracts to return richer information instead of
results/fail. System/precompile contracts can now revert, fail, refund
gas, etc. instead of just succeed or fail.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
* unit test + working code + test spec files
Signed-off-by: Frank Li <b439988l@gmail.com>
Signed-off-by: Stefan Pingel <stefan.pingel@consensys.net>
Co-authored-by: Frank Li <b439988l@gmail.com>
* Json RPC endpoint and test files for trace_rawTransaction
* cache the block number to make sure we are using the same block
Signed-off-by: Sally MacFarlane <sally.macfarlane@consensys.net>
Co-authored-by: Frank Li <b439988l@gmail.com>
Co-authored-by: MadelineMurray <43356962+MadelineMurray@users.noreply.github.com>
For each contract validation error return a relevant error instead of
the incorrect "INSUFFICIENT_GAS" error.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
* Refactor TransactionPool to accept MiningParameters
* Check for zero GasPrice Frontier Transactions
* if you are not mining your node could fill up with pending transactions.
* make low-or-no-gas transactions viable for local transactions
Signed-off-by: Antony Denyer <git@antonydenyer.co.uk>
Co-authored-by: garyschulte <garyschulte@gmail.com>
* handle TTD and mining pre and post merge without creating a regression in behavior for clique networks
Signed-off-by: garyschulte <garyschulte@gmail.com>
Co-authored-by: Sally MacFarlane <sally.macfarlane@consensys.net>
Migrate the jump dest analysis cache into a more generic code cache that
lives inside the EVM.
This is in preparation for Ethereum Object Formats where a string of
code may be treated differently depending on what EVM version is
executing the code. Newer versions will also have difference analyses to
run that will need different backing data structures.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
List of components: controller builder, protocol schedule,
coordinator, block creator and processor.
Code originally written by garyschulte on the merge branch.
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
* Add PostMergeContext that will stop syncing after the swith to PoS
Code originally written by garyschulte and gezero on the merge branch.
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
Rename CONSTANTS_PREFIX to VARIABLES_PREFIX,
since values stored there are not fixed and change over time.
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
* Extend validateAndProcessBlock to return an error message in case of failure
This message can then be used to send a more detailed response to the RPC
caller of ExecutePayload API.
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
When evaluating transactions to include in a block, a warn log message was evaluated for any transction found to be invalid. This was excessively noisy if the base fee had increased as many transactions were considered invalid.
Signed-off-by: Adrian Sutton <adrian.sutton@consensys.net>
* Refactor to async retrieve blocks, and change peer when retrying to get a block
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
* Apply suggested changes
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
* Remove deprecated class
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
* Add more logs arond block synchronizer
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
* First try do download the block from the peer that announced it
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
* Avoid redownload non annunced blocks
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
* Conditionally log at trace level
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
* Use max number of peers when retrying to download a block to try all peers
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
* Use the shared Slf4jLambdaHelper, instead of custom helper
Signed-off-by: Fabio Di Fabio <fabio.difabio@consensys.net>
Add block choice rule to Clique
1. Choose the block with the most total difficulty.
2. Then choose the block with the lowest block number.
3. Then choose the block whose validator had the least recent in-turn block assignment.
4. Then choose the block with the lowest hash.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Co-authored-by: Sally MacFarlane <sally.macfarlane@consensys.net>
* Bump SLF4J version
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* Replace log4j2 API with SLF4j API
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* Replace usage of LogManager#getFormatterLogger
This is for keeping compatibility with SLF4J. If neccesary, a specific formatter can be created for the RlpBlockImporter class
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* Unset the default logging value for the retesteth
This is because it's not possible to resolve the root logger level into a Log4J2 field
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* Prevent creation of Logger context outside SLF4J
org.hyperledger.besu.cli.BesuCommand#setAllLevels was taken from
https://github.com/apache/logging-log4j2/blob/rel%2F2.17.1/log4j-core/src/main/java/org/apache/logging/log4j/core/config/Configurator.java#L309
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* Add FATAL level deprecation message
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* [Sonar] Fix java:S2139
Exceptions should be either logged or rethrown but not both
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* [Sonar] Fix java:S3457
Printf-style format strings should be used correctly
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* Add changelog
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* Add option to enforce tx replay protection for local txs
* Only enforce replay protection if the current milestone supports it
* moved changelog entry to next release
Signed-off-by: Meredith Baxter <meredith.baxter@palm.io>
Signed-off-by: Sally MacFarlane <sally.macfarlane@consensys.net>
Co-authored-by: Sally MacFarlane <sally.macfarlane@consensys.net>
* Add missing Magneto ETC hard fork entry in test
This corresponds to 61bf0d9ca
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* Change ETC bootnode public keys
Signed-off-by: Diego López León <dieguitoll@gmail.com>
* Add ETC Mystique hard fork spec (ECIP-1104)
Signed-off-by: Diego López León <dieguitoll@gmail.com>
Sally MacFarlane
Diego López León
garyschulte
Jiri Peinlich
matkt
Danno Ferrin
Fabio Di Fabio
Sandra Wang
Stefan Pingel
Daniel Lehrner
Antony Denyer
fab-10
Adrian Sutton
mbaxter