An enterprise-grade Java-based, Apache 2.0 licensed Ethereum client https://wiki.hyperledger.org/display/besu

15 KiB

Raw Blame History Unescape Escape

description: Pantheon Create a Permissioned network

Creating a Permissioned Network

The following steps set up a permissioned network with node and account permissions. The network uses the Clique Proof of Authority consensus protocol.

!!!important A permissioned Ethereum network as described here is not protected against all attack vectors. We recommend applying defense in depth to protect your infrastructure.

Prerequisites

Pantheon

Curl (or similar web service client)

Steps

The steps to create a permissoned network are displayed on the right.

1. Create Folders

Each node requires a data directory for the blockchain data. When the node is started, the node key is saved in this directory.

Create directories for your permissioned network, each of the three nodes, and a data directory for each node:

Permissioned-Network/
├── Node-1
│   ├── data
├── Node-2
│   ├── data
└── Node-3
    ├── data

2. Get Address of Node-1

In networks using Clique, the address of at least one initial signer must be included in the genesis file. For this network, we will use Node-1 as the initial signer. This requires obtaining the address for Node-1.

To obtain the address for Node-1, in the Node-1 directory, use the public-key export-address subcommand to write the node address to the specified file (nodeAddress1 in this example)

pantheon --data-path=data public-key export-address --to=data/nodeAddress1

pantheon --data-path=data public-key export-address --to=data\nodeAddress1

3. Create Genesis File

The genesis file defines the genesis block of the blockchain (that is, the start of the blockchain). The Clique genesis file includes the address of Node-1 as the initial signer in the extraData field.

All nodes in a network must use the same genesis file.

Copy the following genesis definition to a file called cliqueGenesis.json and save it in the Permissioned-Network directory:

{
  "config":{
    "chainId":1981,
    "constantinoplefixblock": 0,
    "clique":{
      "blockperiodseconds":15,
      "epochlength":30000
    }
  },
  "coinbase":"0x0000000000000000000000000000000000000000",
  "difficulty":"0x1",

"extraData":"0x0000000000000000000000000000000000000000000000000000000000000000<Node 1 Address>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
  "gasLimit":"0xa00000",
  "mixHash":"0x0000000000000000000000000000000000000000000000000000000000000000",
  "nonce":"0x0",
  "timestamp":"0x5c51a607",
  "alloc": {
      "fe3b557e8fb62b89f4916b721be55ceb828dbd73": {
        "privateKey": "8f2a55949038a9610f50fb23b5883af3b4ecb3c3bb792cbcefbd1542c692be63",
        "comment": "private key and this comment are ignored.  In a real chain, the private key should NOT be stored",
        "balance": "0xad78ebc5ac6200000"
      },
      "627306090abaB3A6e1400e9345bC60c78a8BEf57": {
        "privateKey": "c87509a1c067bbde78beb793e6fa76530b6382a4c0241e5e4a9ec0a0f44dc0d3",
        "comment": "private key and this comment are ignored.  In a real chain, the private key should NOT be stored",
        "balance": "90000000000000000000000"
      },
      "f17f52151EbEF6C7334FAD080c5704D77216b732": {
        "privateKey": "ae6ae8e5ccbfb04590405997ee2d52d2b330726137b875053c36d94e974d162f",
        "comment": "private key and this comment are ignored.  In a real chain, the private key should NOT be stored",
        "balance": "90000000000000000000000"
      }
   },
  "number":"0x0",
  "gasUsed":"0x0",
  "parentHash":"0x0000000000000000000000000000000000000000000000000000000000000000"
}

In extraData, replace <Node 1 Address> with the address for Node-1 excluding the 0x prefix.

!!! example

```json
{
  ...
"extraData":"0x0000000000000000000000000000000000000000000000000000000000000000b9b81ee349c3807e46bc71aa2632203c5b4620340000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
  ...
}
```

!!! warning Do not use the accounts in the genesis file on MainNet or any public network except for testing.

The private keys are displayed which means the accounts are not secure.

4. Create Permissions Configuration File

The permissions configuration file defines the nodes and accounts whitelists.

Copy the following permissions configuration to a file called permissions_config.toml and save a copy in the Node-1/data, Node-2/data, and Node-3/data directories:

!!! example "permissions_config.toml" ```toml accounts-whitelist=["0xfe3b557e8fb62b89f4916b721be55ceb828dbd73", "0x627306090abaB3A6e1400e9345bC60c78a8BEf57"]

nodes-whitelist=[]
```

The permissions configuration file includes the first two accounts from the genesis file.

Permissioned nodes are added using the JSON-RPC API after starting the nodes.

!!! note Permissions are specified at the node level. The permissions_config.toml file must be saved in the data directory for each node.

On-chain permissioning is under development. On-chain permissioning will use one on-chain 
nodes whitelist and accounts whitelist.

5. Start Node-1

Use the following command:

pantheon --data-path=data --genesis-file=../cliqueGenesis.json --permissions-nodes-config-file-enabled --permissions-accounts-config-file-enabled --rpc-http-enabled --rpc-http-api=ADMIN,ETH,NET,PERM,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="*"

pantheon --data-path=data --genesis-file=..\cliqueGenesis.json --permissions-nodes-config-file-enabled --permissions-accounts-config-file-enabled --rpc-http-enabled --rpc-http-api=ADMIN,ETH,NET,PERM,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="*"

The command line specifies:

Nodes and accounts permissions are enabled using the --permissions-nodes-config-file-enabled and --permissions-accounts-config-file-enabled options
JSON-RPC API is enabled using the --rpc-http-enabled option
ADMIN,ETH,NET,PERM, and CLIQUE APIs are enabled using the --rpc-http-api option
All hosts can access the HTTP JSON-RPC API using the --host-whitelist option
All domains can access the node using the HTTP JSON-RPC API using the --rpc-http-cors-origins option.

When the node starts, the enode URL is displayed. The enode URL is required specify Node-1 as a peer and update the permissions configuration file in the following steps.

6. Start Node-2

Start another terminal, change to the Node-2 directory and start Node-2:

pantheon --data-path=data --genesis-file=../cliqueGenesis.json --permissions-nodes-config-file-enabled --permissions-accounts-config-file-enabled --rpc-http-enabled --rpc-http-api=ADMIN,ETH,NET,PERM,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="*" --p2p-port=30304 --rpc-http-port=8546

pantheon --data-path=data --genesis-file=..\cliqueGenesis.json --permissions-nodes-config-file-enabled --permissions-accounts-config-file-enabled --rpc-http-enabled --rpc-http-api=ADMIN,ETH,NET,PERM,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="*" --p2p-port=30304 --rpc-http-port=8546

The command line specifies:

Different port to Node-1 for P2P peer discovery using the --p2p-port option
Different port to Node-1 for HTTP JSON-RPC using the --rpc-http-port option
Data directory for Node-2 using the --data-path option
Other options as for as for Node-1.

When the node starts, the enode URL is displayed. The enode URL is required to update the permissions configuration file in the following steps.

7. Start Node-3

Start another terminal, change to the Node-3 directory and start Node-3:

pantheon --data-path=data --genesis-file=../cliqueGenesis.json --permissions-nodes-config-file-enabled --permissions-accounts-config-file-enabled --rpc-http-enabled --rpc-http-api=ADMIN,ETH,NET,PERM,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="*" --p2p-port=30305 --rpc-http-port=8547

pantheon --data-path=data --genesis-file=..\cliqueGenesis.json --permissions-nodes-config-file-enabled --permissions-accounts-config-file-enabled --rpc-http-enabled --rpc-http-api=ADMIN,ETH,NET,PERM,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="*" --p2p-port=30305 --rpc-http-port=8547

The command line specifies:

Different port to Node-1 and Node-2 for P2P peer discovery using the --p2p-port option
Different port to Node-1 and Node-2 for HTTP JSON-RPC using the --rpc-http-port option
Data directory for Node-3 using the --data-path option
Other options as for as for Node-1.

When the node starts, the enode URL is displayed. The enode URL is required to update the permissions configuration file in the following steps.

8. Add Enode URLs for Nodes to Permissions Configuration File

In another terminal, use the perm_addNodesToWhitelist JSON-RPC API method to add the nodes to the permissions configuration file for each node.

Replace <EnodeNode1>, <EnodeNode2>, and <EnodeNode3> with the enode URL displayed when starting each node.

Node-1:

curl -X POST --data '{"jsonrpc":"2.0","method":"perm_addNodesToWhitelist","params":[["<EnodeNode1>","<EnodeNode2>","<EnodeNode3>"]], "id":1}' http://127.0.0.1:8545

Node-2:

curl -X POST --data '{"jsonrpc":"2.0","method":"perm_addNodesToWhitelist","params":[["<EnodeNode1>","<EnodeNode2>","<EnodeNode3>"]], "id":1}' http://127.0.0.1:8546

Node 3:

curl -X POST --data '{"jsonrpc":"2.0","method":"perm_addNodesToWhitelist","params":[["<EnodeNode1>","<EnodeNode2>","<EnodeNode3>"]], "id":1}' http://127.0.0.1:8547

!!! tip The cURL call is the same for each node except for the JSON-RPC endpoint.

9. Add Nodes as Peers

Use the admin_addPeer JSON-RPC API method to add Node-1 as a peer for Node-2 and Node-3.

Replace <EnodeNode1> with the enode URL displayed when starting Node-1.

Node 2:

curl -X POST --data '{"jsonrpc":"2.0","method":"admin_addPeer","params":["<EnodeNode1>"],"id":1}' http://127.0.0.1:8546

Node 3:

curl -X POST --data '{"jsonrpc":"2.0","method":"admin_addPeer","params":["<EnodeNode1>"],"id":1}' http://127.0.0.1:8547

!!! tip The cURL call is the same for both nodes except for the JSON-RPC endpoint.

Replace <EnodeNode2> with the enode URL displayed when starting Node-2.

Node 3:

curl -X POST --data '{"jsonrpc":"2.0","method":"admin_addPeer","params":["<EnodeNode2>"],"id":1}' http://127.0.0.1:8547

10. Confirm Permissioned Network is Working

Check Peer Count

Use cURL to call the JSON-RPC API net_peerCount method and confirm the nodes are functioning as peers:

curl -X POST --data '{"jsonrpc":"2.0","method":"net_peerCount","params":[],"id":1}' localhost:8545

The result confirms Node-1 (the node running the JSON-RPC service) has two peers (Node-2 and Node-3):

{
  "jsonrpc" : "2.0",
  "id" : 1,
  "result" : "0x2"
}

Send a Transaction from an Account in the Whitelist

Import the first account from the genesis file into MetaMask and send transactions as described in the Private Network Quickstart Tutorial:

!!! example "Account 1" * Address: 0xfe3b557e8fb62b89f4916b721be55ceb828dbd73 * Private key : 0x8f2a55949038a9610f50fb23b5883af3b4ecb3c3bb792cbcefbd1542c692be63 * Initial balance : 0xad78ebc5ac6200000 (200000000000000000000 in decimal)

!!! info Pantheon does not implement private key management.

Try Sending a Transaction from an Account Not in the Accounts Whitelist

Import the last account from the genesis file into MetaMask and try to send a transactions as described in the Private Network Quickstart Tutorial:

!!! example "Account 3" * Address: 0xf17f52151EbEF6C7334FAD080c5704D77216b732 * Private key : 0xae6ae8e5ccbfb04590405997ee2d52d2b330726137b875053c36d94e974d162f * Initial balance : 0x90000000000000000000000 (2785365088392105618523029504 in decimal)

Start a Node Not on the Nodes Whitelist

In your Permissioned-Network directory, create a Node-4 directory and data directory inside it.

Change to the Node-4 directory and start Node-4 specifying the Node-1 enode URL as the bootnode:

pantheon --data-path=data --bootnodes="<EnodeNode1>" --genesis-file=../cliqueGenesis.json --rpc-http-enabled --rpc-http-api=ADMIN,ETH,NET,PERM,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="*" --p2p-port=30306 --rpc-http-port=8548

pantheon --data-path=data --bootnodes="<EnodeNode1>" --genesis-file=..\cliqueGenesis.json --rpc-http-enabled --rpc-http-api=ADMIN,ETH,NET,PERM,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="*" --p2p-port=30306 --rpc-http-port=8548

Start another terminal, use cURL to call the JSON-RPC API net_peerCount method:

curl -X POST --data '{"jsonrpc":"2.0","method":"net_peerCount","params":[],"id":1}' localhost:8548

The result confirms Node-4 has no peers even though it specifies Node-1 as a bootnode:

{
  "jsonrpc" : "2.0",
  "id" : 1,
  "result" : "0x0"
}

Stop Nodes

When finished using the permissioned network, stop all nodes using ++ctrl+c++ in each terminal window.

!!!tip To restart the permissioned network in the future, start from 5. Start Node-1.

15 KiB Raw Blame History Unescape Escape

Creating a Permissioned Network

Prerequisites

Steps

1. Create Folders

2. Get Address of Node-1

3. Create Genesis File

4. Create Permissions Configuration File

5. Start Node-1

6. Start Node-2

7. Start Node-3

8. Add Enode URLs for Nodes to Permissions Configuration File

9. Add Nodes as Peers

10. Confirm Permissioned Network is Working

Check Peer Count

Send a Transaction from an Account in the Whitelist

Try Sending a Transaction from an Account Not in the Accounts Whitelist

Start a Node Not on the Nodes Whitelist

Stop Nodes

15 KiB

Raw Blame History Unescape Escape