* [cmd] Add IsOffline flag
* Add IsOffline to node config
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [node] Disable syncing and p2p msgs if offline
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [rosetta] Clarify syncing status msg
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [internal/config] Add DefaultLocalListenIP & DefaultPublicListenIP
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Add IP to p2p config
* Use default local listening ip for p2p hors if node is in offline
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [p2p] Use peer ip when creating listenAddr
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Fix unit tests & bump config version
* Fix TestAddPeer & TestConnectionToInvalidPeer p2p test
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Fix lint
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Address PR comments
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [rosetta] Add server with example block & network services
* Update go.mod for rosetta SDK
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [internal/configs] Add RosettaServer to node config
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Add rosetta port flag
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [node] Add rosetta server start & rename api.go
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [rosetta] Change server start to use nodeconfig of rosetta
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Cleanup debugging prints
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [rosetta] Fix stdout print & document placeholders
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [rosetta] Fix lint & make StartSevers more consistent
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Disable rosetta by default
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [test] Make explorer deploy rosetta server
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [rosetta] Use direct http server for start
* Make go.mod changes minimal
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [rosetta] Fix fmt
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [rosetta] Fix fmt of go.mod
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [rosetta] Use port 9700 instead of 10000
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Bump config version
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Add v1.0.0 config backwards compatibility test
* Included update message if old config is loaded
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [test] Do not broadcast invalid tx on localnet
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Correct for invalid port when loading old config
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [cmd] Make rosetta variable names consistent
Signed-off-by: Daniel Van Der Maden <dvandermaden0@berkeley.edu>
* [node] Unused package level big.Int
* [p2p] Throttle receives to a max of 100
* [project] Remove msgq
* [node][p2p] Only allow 100 max message handling at time
* [node][p2p] Throttle max message handler with Weighted Semaphore - init w/ uniform weight
* [node] Use go routine for passing handled block
* [p2p] Leftover commented out
* [node] Add log for when cannot pay semaphore cost
* [node] Bump max message handlers
* [internal] Remove file_embed
* [project] Remove unused file, unused function
* [consensus] Unused values
* [config] Unused field & function
* [internal] Unused address & hash
* [project] More unused tests, values, types
* [project] Move conn logger just to bootnode
* [rpc] Remove dead functions
* [internal] More unused functions
* [project] Remove dead keystore dir package
* [p2p] Need lock to grab all Topics
* [node] Force side effect of topic join, give each topic own weighted semaphore
* [project][p2p] Remove wallet, client roles & associated function calls
* [node][service] Remove unused service types
* [wallet] Remove internal wallet code
* [test] Remove wallet from debug.sh
* [test] More cleanup in debug.sh, deploy.sh
* [test] Adjust duration back into local test script
* [test] Increase duration
* [test] Exit with 0, remove RESULT_FILE as not made anymore
* [assignment] Make error case be explicit on public keys, log out important committee size info
* [committee] Do hmy nodes first, exit early if 0 externals to do
* [genesis] Never ignore errors
* [slash][availability] Remove log, remove leftover yaml
* [committee] Maintain same API as before
* [rpc] Enchance RPC of validator information for current epoch signing percent
* [availability] Remove excessive log
* [availability][slash] Unify yaml hook config
* [availability][webhooks] Call webhook when reach missing signing threshold
refactoring to multibls package to avoid cyclic dependency and better structure
fixing import issue
fixing more imports
fixing a bug that causes nil pointer for explorer node
fixing a bug in the super majority vote
changing config to have same epoch for cross link and staking
fixing the compilation error
addressing PR comments
leaving todo for assuming order between pub/pri keys pairs
fixing goimports
removing unwanted warning message
* [slash] Remove dead interface, associated piping
* [slash] Expand out structs
* [consensus] Write to a chan when find a case of double-signing, remove dead code
* [slash] Broadcast the noticing of a double signing
* [rawdb] CRUD for slashing candidates
* [slashing][node][proto] Broadcast the slash record after receive from consensus, handle received proto message, persist in off-chain db while pending
* [slash][node][propose-block] Add verified slashes proposed into the header in block proposal
* [slash][shard] Factor out external validator as method on shard state, add double-signature field
* [slash][engine] Apply slash, name boolean expression for sorts, use stable sort
* [slash] Abstract Ballot results so keep track of both pre and post double sign event
* [slash] Fix type errors on test code
* [slash] Read from correct rawdb
* [slash] Add epoch based guards in CRUD of slashing
* [slash] Write to correct cache for slashing candidates
* [shard] Use explicit named type of BLS Signature, use convention
* [slash] Fix mistake done in refactor, improper header used. Factor out fromSlice to set
* [slash][node] Restore newblock to master, try again minimial change
* [cx-receipts] Break up one-liner, use SliceStable, not Slice
* [network] Finish refactor that makes network message headers once
* [network] Simplify creation further of headers write
* [slash] Adjust data structure of slash after offline discussion with RJ, Chao
* [slash] Still did need signature of the double signature
* [consensus] Prepare message does not have block header
* [consensus] Soft reset three files to 968517d~1
* [consensus] Begin factor consensus network intended message out with prepare first
* [consensus] Factor out Prepared message
* [consensus] Factor out announce message creation
* [consensus] Committed Message, branch on verify sender key for clearer log
* [consensus] Committed Message Factor out
* [consensus] Do jenkins MVP of signatures adjustment
* [main][slash] Provide YAML config as webhook config for double sign event
* [consensus] Adjust signatures, whitespace, lessen GC pressure
* [consensus] Remove dead code
* [consensus] Factor out commit overloaded message, give commit payload override in construct
* [consensus] Fix travis tests
* [consensus] Provide block bytes in SubmitVote(quorum.Commit)
* [consensus] Factor out noisy sanity checks in BFT, move existing commit check earlier as was before
* [quorum] Adjust signatures in quorum
* [staking] Adjust after merge from master
* [consensus] Finish refactor of consensus
* [node] Fix import
* [consensus] Fix travis
* [consensus] Use origin/master copy of block, fix mistake of pointer to empty byte
* [consensus] Less verbose bools
* [consensus] Remove unused trailing mutation hook in message construct
* [consensus] Address some TODOs on err, comment out double sign
Previously, only nodeconfig.GetShardConfig initialized this; calling
SetNetworkType before GetShardConfig resulted in GetShardConfig calls to
return empty network type.
* [consensus] Factor out enums to core/values, begin factor out of consensus mechanisms
* [consensus] Make Mechanism explicit
* [consensus] Add ViewChange to QuorumPhase
* Update core/values/consensus.go
Co-Authored-By: Eugene Kim <ek@harmony.one>
* Update core/values/consensus.go
Co-Authored-By: Eugene Kim <ek@harmony.one>
* [mainnet-release] Address code comments
* [staking][consensus][project] Remove txgen, factor out consensus
* [consensus] Factor out PublicKeys
* [txgen] Bring back txgen
* [project] Undo prior consolidation of error values under core
* [consensus] Update tests using quorum decider
* [consensus] Fix overlooked resets during refactor
* [consensus] Fix wrong check of quorum phase
* [consensus] Address leftover TODO for prepare count
* [consensus] Simplfy reset switch
* [consensus] Fix mistake of wrong ReadSignature in ViewChange, need sender, not node PubKey
this is solve the problem of validators in different network connected
with each others.
* mainet is still using the original harmony prefix to keep backward
compatibility
* pangaea uses "pangaea" as network prefix
* testnet uses "testnet" as network prefix
All nodes in Pangaea and Testnet need to restart to re-connect with each
other. Mainnet nodes have no changes.
Signed-off-by: Leo Chen <leo@harmony.one>
for security reason, node program should only listen to localhost for rpc request by default.
-rpc_ip option is introduced to listen to any port for rpc service
Signed-off-by: Leo Chen <leo@harmony.one>
# This is the 1st commit message:
Fix travis
# This is the commit message #2:
[cleanup] remove is_genesis flag
Signed-off-by: Leo Chen <leo@harmony.one>
# This is the commit message #3:
[nodetype] add nodetype to replace is_explorer
Signed-off-by: Leo Chen <leo@harmony.one>
# This is the commit message #4:
fix beacon sync channel blocking issue
# This is the commit message #5:
use lastMileMux to protect lastMileBlock queue to avoid potential blocking; use sleep instead of ticker
# This is the commit message #6:
Fix the beacon committee check
# This is the commit message #7:
[release] add release action to go_executable_build.sh
Signed-off-by: Leo Chen <leo@harmony.one>
# This is the commit message #8:
[node.sh] add -d option
-d download only
Signed-off-by: Leo Chen <leo@harmony.one>
# This is the commit message #9:
[node.sh] add -T node_type option
-T node_type support node type (validator/explorer)
Signed-off-by: Leo Chen <leo@harmony.one>
# This is the commit message #10:
[node.sh] backward compatible with older harmony binary
Signed-off-by: Leo Chen <leo@harmony.one>
# This is the commit message #11:
[node.sh] support -i shard_id option
-i shard_id specify shard_id, this is applicable only to
explorer node
Signed-off-by: Leo Chen <leo@harmony.one>
# This is the commit message #12:
Revisited api
# This is the commit message #13:
Fix rpc integration
# This is the commit message #14:
address some minor issues in comments and code
# This is the commit message #15:
addressed comments on others' buckets
# This is the commit message #16:
Add Global Access to OS Temp Directory Variable and Move DHT Files Into Temp Directory
Janet Liang
Leo Chen
Daniel Van Der Maden
Jacky Wang
Rongjian Lan
Edgar Aroutiounian
Ganesha Upadhyaya
janet-harmony
Eugene Kim
flicker-harmony
charleszqwang