The `metamask.send.from` field was assumed by various selectors to be
an object, but instead it was recently set to a string. The selectors
have been updated to assume it's a string, and to fetch the full
account object explicitly.
The selector `getSendFromObject` was repurposed for this, as that's
basically what it already did. The optional address parameter was
removed though, as that was only used to fetch the `from` address in
cases where the `send` state was set without there being a `from`
address set. That case is no longer possible, as the `from` address is
always set upon the initialization of the `send` state.
The `getSendFromObject` selector no longer fetches the 'name' of that
address from the address book state either. This property was not used
in either of the cases this selector was used.
ENS currently supports a variety of tlds in addition to `.eth`, and
more will be supported in the future. Rather than hard-code a list of
supported ENS tlds, all valid domain names will now be interpreted as
potential ENS addresses in our address input component.
Closes#7978
The QR scanner component error handling would sometimes redirect the
user to the wrong page. It was also confusingly handled in two places;
the action used to open the QR scanner, and the scanner component.
The error handling has now been corrected, simplified, and integrated
into the QR scanner component itself.
The old way of handling an error within the component was to close the
modal, then call the action to open it all over again. This action took
a route parameter, which instructed the action on which route to open
if the fullscreen UI needed to be opened (as the fullscreen UI is the
only one where the browser will show the camera permission prompt).
This redirection worked just fine for handling the initial opening
of the QR scanner modal. But for any subsequent errors the same action
was used with a _default route_, meaning the user could click "try
again" and find themselves on a completely different screen.
Instead, errors now trigger a state change instead of closing and re-
opening the modal. The permission checks in the action have been
integrated into the component as well.
One functional change is that the scenario where you have an invalid
QR code has been made an error. Previously this just showed the error
message below the video preview, but left the user with no way to try
again. There error page has a "Try again" button, so it seemed better
suited as an error. Also the message literally started with "Error:".
Another functional change is that _all_ errors during initialization
will result in the error UI being shown. Previously there was one error
case that would instead log to the console and leave the user stuck.
These unused props weren't being caught by ESLint because this
component extended another, which I guess made it difficult for the
React plugin to determine what was unused.
The `componentWillUpdate` logic was moved into `componentDidUpdate` so
that it would be picked up by ESLint. Also it seemed like a sensible
place for it to go. Having three redundant gas updates as part of
the same lifecycle function seemed too far, so I ensured it's
only called once.
* Add `react/no-unused-prop-types` rule
All detected unused prop types have been removed. I have attempted to
ensure these props are no longer passed in either.
* Update handling of props to avoid false positive lint errors
These cases were detected by `react/no-unused-prop-types` as being
unused props, even though they were used. These minor adjustments
prevent them from being flagged as errors.
* Update unit tests
Many of these tests were just checking that specific props were passed
from containers or to a child component. These were deleted, as I can't
imagine how they'd be useful.
* Disable `react/no-unused-prop-types` in `componentWillReceiveProps
The rule `react/no-unused-prop-types` doesn't seem to be detecting
props used within `UNSAFE_componentWillReceiveProps`. The two cases
have been disabled temporarily until we can replace these unsafe
lifecycle functions.
* Use `AdvancedGasInputs` in `AdvancedTabContent`
The `AdvancedGasInputs` component was originally extracted from the
`AdvancedTabContent` component, duplicating much of the rendering
logic. They have since evolved separately, with bugs being fixed in one
place but not the other.
The inputs and outputs expected weren't exactly the same, as the
`AdvancedGasInputs` component converts the input custom gas price and
limit, and it converts them both in the setter methods as well.
The `GasModalPageContainer` had to be adjusted to avoid converting
these values multiple times.
Both components dealt with input debouncing separately, both in less
than ideal ways. `AdvancedTabContent` didn't debounce either field, but
it did debounce the check for whether the gas limit field was below the
minimum value. So if a less-than-minimum value was set, it would be
propogated upwards and could be saved if the user clicked 'Save'
quickly enough. After a second delay it would snap back to the minimum
value. The `AdvancedGasInputs` component debounced both fields, but
it would replace any gas limit below the minimum with the minimum
value. This led to a problem where a brief pause during typing would
reset the field to 21000.
The `AdvancedGasInputs` approach was chosen, except that it was
updated to no longer change the gas limit if it was below the minimum.
Instead it displays an error. Parent components were checked to ensure
they would detect the error case of the gas limit being set too low,
and prevent the form submission in those cases. Of the three parents,
one had already dealt with it correctly, one needed to convert the
gas limit from hex first, and another needed the gas limit check added.
Closes#6872
* Cleanup send components
Empty README files have been removed, and a mistake in the index file
for the send page has been corrected. The Gas Slider component class
name was updated as well; it looks like it was originally created from
`AdvancedTabContent`, so it still had that class name.
* Style Send Header
* Move Send to-row to send view and restyle
* Add "Recents" group to select recipient view
* Rename SendToRow to AddRecipient
* Basic UI and Layout
* New ENSInput component
* wip - fuzzy search for input
* small refactor
* Add Dialog
* contact list initial
* initial error on invalid address
* clean up edit
* Click to open modal
* Create AddToAddressBookModal component
* Modal styling and layout
* modal i18n
* Add to Addressbook
* ens wip
* ens wip
* ENS Resolution
* Reset input
* Send to explicit address
* Happy Path Complete
* Add back error checking
* Reset send-to when emptying input
* Add back warning object
* Fix linter
* Fix unit test #1 - fix import paths
* Remove dead tests
* One more to go
* Fix all unit tests
* add unit test for reducers and actions
* test rendering AddRecipient
* Add tests for dialog boxes in AddRecipient
* Add test for validating
* Fix linter
* Fix e2e tests
* Token send e2e fix
* Style View Contact
* Style edit-contact
* Fix e2e
* Fix from-import-beta-ui e2e spec
* Make section header say "add recipient” by default
* Auto-focus add recipient input
* Update placeholder text
* Update input title font size
* Auto advance to next step if user paste a valid address
* Ellipsify address when recipient is selected
* Fix app header background color on desktop
* Give each form row a margin of 16px
* Use .container/.component naming pattern for ens-input
* Auto-focus on input when add to addressbook modal is opened; Save on Enter
* Fix and add unit test
* Fix selectors name in e2e tests
* Correct e2e test token amount for address-book-send changes
* Adds e2e test for editing a transaction
* Delete test/integration/lib/send-new-ui.js
* Add tests for amount max button and high value error on send screen to test/e2e/metamask-ui.spec.js
* lint and revert to address as object keys
* add chainId based on current network to address book entry
* fix test
* only display contacts for the current network
* Improve ENS message when not found on current network
* Add error to indicate when network does not support ENS
* bump gaba
* address book, resolve comments
* Move contact-list to its own component
* De-duplicate getaddressbook selector and refactor name selection logic in contact-list-tab/
* Use contact-list component in contact-list-tab.component (i.e. in settings)
* Improve/fix settings headers for popup and browser views
* Lint fixes related to address book updates
* Add 'My accounts' page to settings address book
* Update add new contact button in settings to match floating circular design
* Improve styles of view contact page
* Improve styles and labels of the add-contact.component
* Further lint fixes related to address book updates
* Update unit tests as per address book updates
* Ensure that contact list groups are sorted alphabetically
* Refactor settings component to use a container for connection to redux; allow display of addressbook name in settings header
* Decouple ens-input.component from send context
* Add ens resolution to add contact screen in settings
* Switching networks when an ens address is shown on send form removes the ens address.
* Resolve send screen search for ensAddress to matching address book entry if it exists
* Show resolved ens icon and address if exists (settings: add-contact.component)
* Make the displayed and copied address in view-contact.component the checksummed address
* Default alias state prop in AddToAddressBookModal to empty string
* Use keyCode to detect enter key in AddToAddressBookModal
* Ensure add-contact component properly updates after QR code detection
* Fix display of all recents after clicking 'Load More' in contact list
* Fix send screen contact searching after network switching
* Code cleanup related to address book changes
* Update unit tests for address book changes
* Update ENS name not found on network message
* Add ens registration error message
* Cancel on edit mode takes user back to view screen
* Adds support for memo to settings contact list view and edit screens
* Modify designs of edit and view contact in popup environment
* Update settings content list UX to show split columns in fullscreen and proper internal navigation
* Correct background address book API usages in UI
* Move send to pages/
* Fix unit tests
* Finish UI
* Integrate asset dropdown to send actions
* Remove console.log
* Hide asset change during edit
* Enable switch from send token to seand eth
* Enable switching from token to eth when editing
* Fix linter
* Fixing test
* Fix unit tests
* Fix linter
* Fix react warning; remove console.log
* fix flat test
* Add metrics
* Address code review comments
* Consistent spacing between send screen form rows.
* Reduce height of gas buttons on send screen.
* Make send screen gas button height dependent on size of contents.
The state object had been changed, but our mock states for tx approval were using the old keys.
Rather than try to muck about and figure out each and every change, I've re-generated a UI dev state for tx approval, which should help @zanibas on his current project.
We can continue adding new dev states as needed from here. If anyone catches a state that doesn't render correctly, it's worth checking if a new snapshot doesn't solve things.
Debugged by adding new debugging loggers, and I've left them in place for easier future debugging.
Mark Stacey
Erik Marks
Whymarrh Whitby
Dan J Miller
Chi Kei Chan
Sneh Koul
brunobar79
Dan Finlay