The previous minimum version of 56.2 resulted in the build failing
validation when it was uploaded to the Firefox web store, because that
version doesn't exist. It was set to that version because a Firefox
fork uses it.
Instead the minimum version has been reduced so that we pass
validation. Unfortunately this will mean that a single incompatible
version of Firefox Mobile will allow the extension to be installed
(in theory), but there was no other way to avoid cutting off support
to WaterFox (the Firefox fork). The warning about this from the addons
linter can be ignored for now.
* Optimize images only during production build
Image optimization is fairly slow (over a minute), and isn't necessary
for test or development builds. It is now only run as part of the
`build` gulp task, which is used during `gulp dist`.
* Remove unused gulp tasks
There were two high-level tasks and one style formatting task that
were not used by any npm scripts, so were probably unused generally.
The `dev` task was a duplcate of `dev:extension`. The `build:extension`
task was useful for just building the extension without performing
other steps required by the final production bundle, but it was
broken. It didn't correctly build the ui-libs and bg-libs required.
Instead of fixing it, it has been removed until the handling of those
separate library bundles is simplified.
The style formatting task seems like it could be useful, but I'm unsure
about keeping it around as opt-in, as in practice it'll just end up
being ignored. Moreover the library authors themselves are recommending
switching to `prettier`, so I think we're better off removing it for
now, then considering using `prettier` if we want to introduce
something like this again.
The stylelint dependency was added because it's a peer dependency of
gulp-stylelint that should have already been listed among our
dependencies. It hadn't caused a problem before because it happened to
be a transitive dependency of gulp-stylefmt, which is no longer needed
and has been removed.
* Use common test build during CI
Previously both e2e test jobs were running `test:build`. Now there is a
separate job that runs `test:build` that runs before each e2e test job,
so that `test:build` is only run once instead of twice.
* Move test builds to separate directory
This prevents the test build from conflicting with the production build
in later jobs.
Any missing messages in the `en` locale are now reported to Sentry as
errors. They are printed to the console as an error upon the first
encounter as well.
If a missing message is found during e2e testing, the error is thrown.
This will likely break the e2e test even if it isn't looking for
console errors, as the UI with the missing message will fail to render.
The `tOrDefault` method was updated to no longer attempt looking for
messages with a key that is a falsey value (e.g. `undefined`). There
are a few places where they key is determined dynamically, where it's
expected during the normal flow for it to be `undefined` sometimes.
In these cases we don't want the error to be thrown.
* Add '--quiet' flag to verify locales script
The `--quiet` flag reduces the console output to just the essential
information for running in a CI environment. For each locale, it will
print the number of unused messages (if any).
* Add `verify-locales` script to lint CI job
The locales are now verified as part of the lint CI job. Any unused
messages detected will result in the job failing.
* Switch to using string literals for locale keys
Various message keys were being specified with a string template
instead of a string literal. They have been switched to use string
literals so that the script for detecting unused messages can find
them.
* Remove unused locale messages
A number of unused locale messages have been removed - probably
leftover from old UI elements that have since been removed.
The `verify_locale_strings` script has been augmented to search the UI
for string literals, and match those against the locale message keys in
the `en` locale. Any messages without a corresponding string literal
are assumed to be unused.
The script has also been updated with an optional `--fix` parameter,
which will automatically delete any unused messages from locales.
148 unused messages were found in this case, out of a total of about
650 messages. Another 70 messages are _potentially_ unused and require
further investigation, but weren't as easy to rule out because they
were found in string literals.
* Remove additional unused locale messages
The following messages were more difficult to rule out because they
were present as string literals in the UI. They do appear to be
unused as locale keys though.
* Remove unused sendWarnings
The send warnings state and associated component is no longer used
anywhere.
* Remove unused subtitleParams
The `subtitleParams` SendHeader prop was being ignored. It has been
removed, along with associated selectors and tests.
A new entry has been added for v7.2.1, and the Brave locales have been
moved from v7.1.1 to v7.2.0. That feature was mistakenly included under
the v7.1.1 heading - it was in fact released in v7.2.0
The disk store has not been written to since MetaMask v4.3.0, as it was
removed in #3083. It was kept around so that anything written to disk
prior to v4.3.0 could still be restored.
It has been a year and a half since that release, so I think it's time
to remove the disk store altogether. The consequences of losing locally
stored data are small anyway - it's an inconvenience at worst.
* Adds threebox controller
* Adds threebox approval modal
* Fix unit tests and lint after addition of threebox
* Correct threebox behaviour after rejecting request for backup; fixes e2e tests.
* Update threebox controller for automatic syncing
* Ensure frontend locale updates when preferences are changed via direct update within controller
* Add toggle in settings for 3box syncing
* Update threebox controller for latest 3box version
* Delete unnecessary frontend changes for threebox integration
* Backing up address book contacts with threebox
* Update unit tests for 3box-integration additions
* Only enable threebox by default for new wallets
* Mock globals for correct unit tests
* 3box '1.10.2' -> '^1.10.2'
* Correct capilalization on 3Box
* Use log.debug instead of console.log in threebox controller
* Update yarn.lock
* Remove edge build
* Split 3box module into background deps js file
* extra bundle opts for bg-libs
* sync yarn.lock
* new3Box logic
* Show confirm threebox restore after import
* Remove bg-libs.js from manifest file for dev builds
* Switch 3Box controller to using the spaces api (instead of the profile api)
* Finalize switching to spaces api and only restoring from 3box after import
* Update metamask-controller-test.js for threebox controller changes
* Make threebox modal style consistent with others and update success button wording
* Use mock 3box when in test
* Correct 3box modal header
* Remove unnecessary property of threebox controller provider
* Remove unnecessary method calls after restoration from 3box in the threebox-restore-confirm modal.
* Replace setThreeBoxSyncingPermission calls in routes/index.js with turnThreeBoxSyncingOn
* Replace erroneous use of with
* Replace erroneous use of threeboxSyncing with threeBoxSyncingAllowed in advancted-tab directory
* Lint fixes for 3box changes
* Log errors encountered when updating 3Box
* Remove unnecessary parameter from state update
* Add timeout to initial 3Box sync
The initial 3Box sync will now timeout after 1 minute. If the timeout
is triggered, 3Box is disabled and cannot be re-enabled unless the
initial sync does finally finish. If it never finishes, 3Box cannot
be enabled unless the extension is reinstalled.
The Advanced Settings page was updated to show this option as disabled
in that circumstance, with a new discription explaining why it's
disabled. The UI here could certainly be improved.
Additionally, "on" and "off" labels were added to the toggle to match
the other toggles on the Advanced Settings page.
* Use non-minified 3Box module
We had previously used the minified 3Box module to avoid a build error
encountered when `envify` was processing the `libp2p` module (which is
used by 3Box). The build would fail because `esprima` (used by `envify`)
is incompatible with the object spread/rest operator (which is used in
`libp2p`).
That issue has been solved by adding a global Babelify transformation
specifically for transpiling out the object rest/spread operator from
dependencies. It has been targetted to only affect `libp2p` to avoid
extending the build time too much. This workaround can be used until
a new version of `esprima` is released that includes this bug fix.
* Use app key addresses for threebox
* Replace use of modal for confirming 3box restoration with a home notification
* Adds e2e tests for restoring from threebox
* Update eth-keyring-controller to 5.1.0
* Correct parameters passed to getAppKeyAddress in threebox.js
* Add prefix to origin passed to getAppKeyAddress in threebox.js
* Remove unused locale message.
* Prevent CORS errors in firefox e2e tests
* Ensure extraneous scripts are excluded from the local test dev build
* Move threeBoxLastUpdate state from home.component to redux
* Threebox PR code cleanup
* Always use first address when initializing threebox
* Replace setRestoredFromThreeBox api with setRestoredFromThreeBoxToFalse and setRestoredFromThreeBoxToTrue
* Update development/metamaskbot-build-announce.js to include ui-libs and bg-libs in hard coded bundle list
* Update test/e2e/threebox.spec.js to use new helpers added with pull #7144
* Make setFeatureFlag available on the ui window during testing
* Hide threebox feature behind a feature flag that can only be activated via dev console
* Remove unnecessary migration of threebox feature flag
* Prevent this.init() call in threebox constructor if feature flag is not turned on
* Prevent threebox notification from showing if feature flag is falsy
* http://localhost/8889 -> http://localhost/* in gulp manifest:testing tasks
* Replace `undefined` selectedAddress with `null`
The `runtime.Port.postMessage` API will drop keys with a value of
`undefined` on Chrome, but not on Firefox. This was a problem for the
`publicConfig` stream, which passed the key `selectedAddress` with the
value of `undefined` to communicate to dapps that the user had logged
out.
Instead a `null` is now passed for `selectedAddress` upon logout, which
is correctly sent by the `runtime.Port.postMessage` API on both Chrome
and Firefox.
closes#7101closes#7109
* Update `metamask-inpage-provider` to v3.0.0
The v3.0.0 update includes a change to the `accountsChanged` event. The
event will now emit an empty array instead of an array with `undefined`
or `null`.
The previous behavior was to emit `[undefined]`. The previous commit
would have changed that to `[null]` anyway, so we figured if we're
going to make a public-facing change to the event anyway we should
change it to be correct. `[undefined]` was never intended, and it
technically violates EIP-1193, which states that the `accountsChanged`
event should emit an array of strings.
The AbortController is used in both the background and the UI. Support
for AbortController was added to Chrome in version 66, which is above
our minimum supported version.
I did consider increasing the minimum Chrome version to 66, but we have
a decent number of users still on Chrome 65 unfortunately.
The minimum compatible version of Firefox has been lowered from `60.0`
to `56.2`. It was originally set to `60.0` because that is Firefox ESR,
which currently the minimum Firefox version with security updates.
However Waterfox is based upon Firefox `56.0`, and has backported
security fixes from the ESR release.
This change in minimum version requires no additional transpiling, and
doesn't affect any browser APIs we use.
It does introduce one additional warning in the `addon-linter` about
Firefox for Android `56` lacking support for browser action popups.
However there is no version `56.2` of Firefox for Android, so the
minimum version remains `57` in practice (which does support browser
action popups).
* Replace `undefined` selectedAddress with `null`
The `runtime.Port.postMessage` API will drop keys with a value of
`undefined` on Chrome, but not on Firefox. This was a problem for the
`publicConfig` stream, which passed the key `selectedAddress` with the
value of `undefined` to communicate to dapps that the user had logged
out.
Instead a `null` is now passed for `selectedAddress` upon logout, which
is correctly sent by the `runtime.Port.postMessage` API on both Chrome
and Firefox.
closes#7101closes#7109
* Update `metamask-inpage-provider` to v3.0.0
The v3.0.0 update includes a change to the `accountsChanged` event. The
event will now emit an empty array instead of an array with `undefined`
or `null`.
The previous behavior was to emit `[undefined]`. The previous commit
would have changed that to `[null]` anyway, so we figured if we're
going to make a public-facing change to the event anyway we should
change it to be correct. `[undefined]` was never intended, and it
technically violates EIP-1193, which states that the `accountsChanged`
event should emit an array of strings.
The AbortController is used in both the background and the UI. Support
for AbortController was added to Chrome in version 66, which is above
our minimum supported version.
I did consider increasing the minimum Chrome version to 66, but we have
a decent number of users still on Chrome 65 unfortunately.
The `_fetchAll` function is expected to return values, so catching
errors and logging them only results in an additional error at the
place where `_fetchAll` is called. It's better instead to let the
error get thrown as normal.
In this particular case `_fetchAll` is only called in once place. The
error is still correctly caught and logged (in the `_update` function)
The minimum compatible version of Firefox has been lowered from `60.0`
to `56.2`. It was originally set to `60.0` because that is Firefox ESR,
which currently the minimum Firefox version with security updates.
However Waterfox is based upon Firefox `56.0`, and has backported
security fixes from the ESR release.
This change in minimum version requires no additional transpiling, and
doesn't affect any browser APIs we use.
It does introduce one additional warning in the `addon-linter` about
Firefox for Android `56` lacking support for browser action popups.
However there is no version `56.2` of Firefox for Android, so the
minimum version remains `57` in practice (which does support browser
action popups).
* ci - install deps with "--har" flag to capture network activity
* ci - add yarn install HAR logs to build-artifacts
* ci - yarn har - fix typo
* Update .circleci/scripts/collect-har-artifact.sh
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* ci - create source-map-explorer build-artifacts
* ci - add source-map-explorer builds to metamaskbot comment
* lint fix
* ci - source-map-explorer - include all bundles
MetaMask Bot
Mark Stacey
kumavis
Jenny Pollack
Marius van der Wijden
Dan Finlay
Erik Marks
Sunghee Lee
Sergej Müller
Dan J Miller