The test for receiving ETH from a contract had been clicking on the
first transaction list item, assuming it was pending. This is not
necessarily true; if the pending transaction hadn't yet been rendered,
this could select the first confirmed transaction instead.
The test has been updated to look for the first _pending_ transaction,
rather than just the first transaction.
Note that this likely does not fix the intermittent failure we've been
experiencing. The failure has been observed with this fix in place.
This test would occasionally fail due to a fluke of timing, where a
pending transaction would take slightly longer than expected to
be rendered in the "confirmed transactions" list. This `wait` block
ensures the test will try again until it has confirmed.
The test artifact directory for failed test "verbose reports" was
mistakenly being set to `[browser]/undefined`. This was broken during
the refactor in #7798, when the `driver` parameter was mistakenly left
in after the `verboseReportOnFailure` function was converted to a
method being called on `driver`.
This state has been removed from the background. It was used for the
old UI, and has been unused for some time. A migration has been added
to delete this state as well.
The action creator responsible for updating this state has been removed
from the UI as well, along with the `callBackgroundThenUpdateNoSpinner`
convenience function, which was only used for this action.
Previously all browser globals were allowed to be used anywhere by
ESLint because we had set the `env` property to `browser` in the ESLint
config. This has made it easy to accidentally use browser globals
(e.g. #8338), so it has been removed. Instead we now have a short list
of allowed globals.
All browser globals are now accessed as properties on `window`.
Unfortunately this change resulted in a few different confusing unit
test errors, as some of our unit tests setup assumed that a particular
global would be used via `window` or `global`. In particular,
`window.fetch` didn't work correctly because it wasn't patched by the
AbortController polyfill (only `global.fetch` was being patched).
The `jsdom-global` package we were using complicated matters by setting
all of the JSDOM `window` properties directly on `global`, overwriting
the `AbortController` for example.
The `helpers.js` test setup module has been simplified somewhat by
removing `jsdom-global` and constructing the JSDOM instance manually.
The JSDOM window is set on `window`, and a few properties are set on
`global` as well as needed by various dependencies. `node-fetch` and
the AbortController polyfill/patch now work as expected as well,
though `fetch` is only available on `window` now.
* Add UI for selecting multiple accounts on the first permissions connect screen
* Make accounts list scrollable on connect screen
* Change title wording on connect screen to 'select your accounts'
* Add select all tooltip to info circle on top of connect screen account list
* Add security info footer to the first screen of the connect flow
* Apply redesigns to page 2 of connect flow
* Display number of accounts on connect flow second screen if there are multiple to connect
* Update e2e tests for connect screen multi-select changes
* Remove unused chooseAnAcount message
* Fix styling/display of redirect elements on second page of connect flow
* Assorted small fixes in permissions connect
* Remove unnecessary tiny delays in spec files
* Remove incorrect use of bem modified in choose-account
* Remove unused locale
* Use Set for managing selected accounts in choose-acount and permissions-connect componets
* Compone!
* Move connect flow header into a reusable component, and implement new header designs
* Update locales and add missing locales
* Improve permission list item design (second screen of connect flow)
* Check box component improvements
* Fixes in variables.scss
* Simplfy code in selectAll of choose-account.component
* Hide checkboxes on first pages on connect flow when there is only one account
* Allow autofill of default new account modal text with right arrow
* Disable next button on first screen of connect flow when no accounts selected
* Improve choose-account/index.scss
* Remove metamask secure graphic
* Fix connect flow redirect screen
* Fix connectToMultiple locale
* Remove locales no longer used after connect flow multiple connect updates
* Fix size of dapp icon on redirect screen of connect flow
* Clean up choose-account code
* Stop using placeholder in new-account-modal
* Remove unused styles in permission-page-container/index.scss
* Pass origin instead of site name to PermissionsConnectHeader in connect flow
* Make iconName a required prop in permissions-connect-header
* Show checkbox in cases where there is one account in the choose-account list
* Do not render select all checkbox when only 1 list item, instead of just hiding it
* Small cleanup in choose-account/index.scss
Two tabs have been created on the home screen: 'Assets' and 'History'.
This tabbed view is shown only on small screens (e.g. in the popup).
The fullscreen view is unchanged.
The toggle-able left sidebar no longer exists, so some 'sidebar-left'
specific code and styles have been removed. The button in the menu bar
has been removed as well.
The 'History' title of the transaction history is now redundant when
where are no pending transactions, so it as been conditionally hidden.
A passthrough for `data-testid` has been added to the Tab component for
convenience in e2e tests.
The 'Add Token' component has been redesigned to be more in-line with
the new home screen design. The description instructing the user to
click the 'Add Token' button has been removed, and the section itself
has been made roughly the same size as one of the list item. The text
now appears on just one line, overflowing to two if necessary.
The styles for the TokenCell component have been moved to be alongside
the component. They have also been renamed from `token-list-item` to
match the component name.
This commit updates the existing _Connected Sites_ section to a modal using
the `Popover` component. This will serve as a base for the new modal design.
* Use @metamask/eslint-config@1.1.0
* Use eslint-plugin-mocha@6.2.2
* Mark root ESLint config as root
* Update Mocha ESLint rules with shared ESLint config
* Add benchmark to CI
The page load benchmark for Chrome is now run during CI, and the
results are collected and summarized in the `metamaskbot` comment.
Closes#6881
* Double default number of samples
The number of default samples was changed from 10 to 20. The results
from 10 samples would show statistically significant changes in page
load times between builds, so weren't a sufficiently useful metric.
A margin of error metric has been added, which is calculated from a 95%
confidence interval. This confidence interval is calculated using
Student's t-distribution, which is generally preferred for smaller
sample sizes (< ~30) of populations following a normal distribution.
The script `benchmark.js` will collect page load metrics from the
extension, and print them to a file or the console. A method for
collecting metrics was added to the web driver to help with this.
This script will calculate the min, max, average, and standard
deviation for four metrics: 'firstPaint', 'domContentLoaded', 'load',
and 'domInteractive'. The variation between samples is sometimes high,
with the results varying between samples if only 3 were taken. However,
all tests I've done locally with 5 samples have produced results within
one standard deviation of each other. The default number of samples has
been set to 10, which should be more than enough to produce consistent
results.
The benchmark can be run with the npm script `benchmark:chrome` or
`benchmark:firefox`, e.g. `yarn benchmark:chrome`.
The 'can retype the seed phrase' test would fail sometimes when one of
the words in the seed phrase was a subset of another word (e.g. 'issue'
and 'tissue'). This is because the selector used to find the word
looked for the first element that contained the text, rather than an
exact match.
To simplify the selector and make it more reliable, test ids were added
to each seed phrase word. The selector now uses CSS instead of XPath,
and it only finds exact matches.
A test id was also added to the div containing the shuffled seed words
to select from, so that the chosen seed words wouldn't be selected
in place of the real target when the same word appears twice.
There have been intermittent test failures at the beginning of various
e2e test runs. Most tests start with waiting for the 'Welcome' button
to be visible and enabled, which means waiting for the loading screen
to go away.
It looks like the reason the test intermittently fails is that
sometimes the loading screen doesn't appear until a few moments _after_
the page loads (or that it vanishes and comes back).
It was rather difficult to track down each possible cause for the
loading screens, so in the meantime a pause has been added at the start
of each run. This should hopefully suffice to ensure the momentary gap
in loading has been passed by the time the first test starts up.
The `withFixtures` helper will instantiate ganache, a web driver, and
a fixture server initialized with the given set of fixtures. It is
meant to facilitating writing small, isolated e2e tests.
The first example test has been added: simple-send. It ensures that the
user can send 1 ETH to another account.
These new e2e tests will run during the normal e2e test run.
Closes#6548
The driver now has a page navigation function that can navigate to any
of the three primary pages used in the extension. Additional pages and
support of paths can be added later as needed.
As of #7663, an in-memory store was used in place of local storage
during e2e tests, to facilitate the use of state fixtures. However,
this made it difficult to export state during a test run. The
instructions for exporting state to create fixtures assumed that local
storage was being used.
A new global function has been added to the background context to allow
exporting state. This method is available during testing and
development, and it works with either local storage or the in-memory
store. The fixture instructions have been updated to reference this new
function.
The signature request e2e tests were previously using ropsten. This
expectation was even hard-coded into the test contract dapp.
Instead the contract-dapp has been updated to use the current `chainId`
when calling `signTypedData` (falling back to the `networkId` if
`chainId` is not set). The fixture used by `signature-request` has been
updated to use ganache.
The switch case has been moved to a separate function so that the
initialization steps following the web driver instantiation could more
easily be deduplicated.
* Wait until element is clickable before clicking in e2e tests
A new `findClickableElement` has been added to the webdriver to allow
finding an element and blocking until it's both visible and enabled.
This is now used by the pre-existing `clickElement` method as well.
All cases where something is clicked in the e2e tests have been
updated to use one of these methods, to ensure we don't run into
intermittent failures when loading screens take longer than usual.
These rows on the Advanced Settings page were being looked up in the
e2e tests by the order they appeared in. Instead they're now referenced
by data id, so that we can add new settings and re-arrange them without
breaking the e2e tests.
The transaction navigation in the e2e tests has been made simpler with
the addition of data attributes to help with finding the navigation
buttons. Each button is now labelled according to its purpose.
* Specify type before parameter name
Various JSDoc `@param` entries were specified as `name {type}` rather
than `{type} name`.
A couple of `@return` entries have been given types as well.
* Use JSDoc optional syntax rather than Closure syntax
* Use @returns rather than @return
* Use consistent built-in type capitalization
Primitive types are lower-case, and Object is upper-case.
* Separate param/return description with a dash
These tests were updated in #7473 to navigate in a different order,
because the transaction order changed. Unfortunately this meant that
a second contract deployment was being confirmed, where it was
previously being rejected.
This updates the test to ensure the same transaction is rejected and
confirmed as prior to the change in #7473
The Selenium webdriver is difficult to use, and easy to misuse. To help
use the driver and make it easier to maintain our e2e tests, all driver
interactions are now performed via a `driver` module. This is basically
a wrapper class around the `selenium-webdriver` that exposes only the
methods we want to use directly, along with all of our helper methods.
These tests were updated in #7473 to navigate in a different order,
because the transaction order changed. Unfortunately this meant that
a second contract deployment was being confirmed, where it was
previously being rejected.
This updates the test to ensure the same transaction is rejected and
confirmed as prior to the change in #7473
* Make gas estimate update on debounced token amount change, not just on blur after change
* Updated tests
* Ensure `updateGas` is bound early
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The account details close button is difficult to click from the e2e
tests because it has a size of zero. The actual icon is added via CSS
as an `::after` pseudo-element.
The CSS has been adjusted to give the icon a size, and it the markup
is now a `button` rather than a `div`.
Dan J Miller
Erik Marks
Erik Marks
Mark Stacey
kumavis
Whymarrh Whitby
ryanml
ryanml