`removeFromAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers were updated to `await` the completion of this operation.
`addToAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers of this action creator were updated to `await` the
completion of the operation. It was called just before redirecting the
user to a different page or closing a modal, and it seemed appropriate
to wait before doing those things.
ENS currently supports a variety of tlds in addition to `.eth`, and
more will be supported in the future. Rather than hard-code a list of
supported ENS tlds, all valid domain names will now be interpreted as
potential ENS addresses in our address input component.
Closes#7978
The QR scanner component error handling would sometimes redirect the
user to the wrong page. It was also confusingly handled in two places;
the action used to open the QR scanner, and the scanner component.
The error handling has now been corrected, simplified, and integrated
into the QR scanner component itself.
The old way of handling an error within the component was to close the
modal, then call the action to open it all over again. This action took
a route parameter, which instructed the action on which route to open
if the fullscreen UI needed to be opened (as the fullscreen UI is the
only one where the browser will show the camera permission prompt).
This redirection worked just fine for handling the initial opening
of the QR scanner modal. But for any subsequent errors the same action
was used with a _default route_, meaning the user could click "try
again" and find themselves on a completely different screen.
Instead, errors now trigger a state change instead of closing and re-
opening the modal. The permission checks in the action have been
integrated into the component as well.
One functional change is that the scenario where you have an invalid
QR code has been made an error. Previously this just showed the error
message below the video preview, but left the user with no way to try
again. There error page has a "Try again" button, so it seemed better
suited as an error. Also the message literally started with "Error:".
Another functional change is that _all_ errors during initialization
will result in the error UI being shown. Previously there was one error
case that would instead log to the console and leave the user stuck.
* Use @metamask/eslint-config@1.1.0
* Use eslint-plugin-mocha@6.2.2
* Mark root ESLint config as root
* Update Mocha ESLint rules with shared ESLint config
* Various component tests and some conditional statements
Conditional in account-menu in removeAccount when keyring sometimes is not initially provideed
Conditional on unlock-page when there is no target.getBoundingClientRect on the element.
* Update helpers
* Remove component debugging
* Add default params for render helpers
* Remove stubComponent for old Mascot
Changes in https://github.com/MetaMask/metamask-extension/pull/7893 has prevented the need to stub it out.
Change logout to lock in account-menu test
* Update lodash
All versions of the full `lodash` package have been updated to 4.17.15.
The only exception is v4.17.14 which is pinned by `ganache-core`.
* Switch to using `lodash` instead of per-method packages
We have the full lodash package _ten times_ as a production transitive
dependency, so including per-method packages is not saving space (it
might instead result in slightly more space being used).
* Remove unnecessary `getEnvironmentType` parameter
The default value of the first parameter is `window.location.href`, so
there is no need to pass it in explicitly.
* Remove junk parameter from `getEnvironmentType` invocation
`getEnvironmentType` doesn't need to be passed any parameter, as the
default value is `window.location.href` which is generally what is
wanted. In this case, the variable `location.href` was always
`undefined` anyway. This particular `location` variable is from React
Router, and does not have an `href` property.
* Fix comment for `getEnvironmentType`
One of the possible return values was referred to by the wrong name.
`withRouter` has been removed from any components that were not using
any of the three props injected by `withRouter`: `history`, `location`,
and `match`.
`compose` is a no-op when called upon a single component, so it has
been removed in all such cases.
These rows on the Advanced Settings page were being looked up in the
e2e tests by the order they appeared in. Instead they're now referenced
by data id, so that we can add new settings and re-arrange them without
breaking the e2e tests.
* Add `react/no-unused-prop-types` rule
All detected unused prop types have been removed. I have attempted to
ensure these props are no longer passed in either.
* Update handling of props to avoid false positive lint errors
These cases were detected by `react/no-unused-prop-types` as being
unused props, even though they were used. These minor adjustments
prevent them from being flagged as errors.
* Update unit tests
Many of these tests were just checking that specific props were passed
from containers or to a child component. These were deleted, as I can't
imagine how they'd be useful.
* Disable `react/no-unused-prop-types` in `componentWillReceiveProps
The rule `react/no-unused-prop-types` doesn't seem to be detecting
props used within `UNSAFE_componentWillReceiveProps`. The two cases
have been disabled temporarily until we can replace these unsafe
lifecycle functions.
* Use arrow property initializer functions
* Use pure components where applicable
* Add UNSAFE_ prefix for deprecated lifecycle hooks
* Add allow UNSAFE_
* Removed unused "Component"
* Replace boron with 'fade-modal'
* Upgrade react/no-deprecated to an error
* Paste react-tooltip-component source directly
* Use arrow functions to bind `this`
* Add UNSAFE_ prefix
* Update react-redux, react-router-dom
* Remove things from inlined 'fade-modal'
* Adjust mountWithRouter to get unit tests passing again
* Remove domkit
* Add Wrapper to render-helpers
* Upgrade @storybook/addon-knobs
* add PermissionsController
remove provider approval controller
integrate rpc-cap
create PermissionsController
move provider approval functionality to permissions controller
add permissions approval ui, settings page
add permissions activity and history
move some functionality to metamask-inpage-provider
rename siteMetadata -> domainMetadata
add accountsChange notification to inpage provider
move functionality to inpage provider
update inpage provider
Remove 'Connections' settings page (#7369)
add hooks for exposing accounts in settings
rename unused messages in non-English locales
Add external extension id to metadata (#7396)
update inpage provider, rpc-cap
add eth_requestAccounts handling to background
prevent notifying connections if extension is locked
update inpage provider
Fix lint errors
add migration
review fixes
transaction controller review updates
removed unused messages
* Login Per Site UI (#7368)
* LoginPerSite original UI changes to keep
* First commit
* Get necessary connected tab info for redirect and icon display for permissioned sites
* Fix up designs and add missing features
* Some lint fixes
* More lint fixes
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Code cleanup for LoginPerSite-ui
* Update e2e tests to use new connection flow
* Fix display of connect screen and app header after login when connect request present
* Update metamask-responsive-ui.spec for new item in accounts dropdown
* Fix approve container by replacing approvedOrigins with domainMetaData
* Adds test/e2e/permissions.spec.js
* Correctly handle cancellation of a permissions request
* Redirect to home after disconnecting all sites / cancelling all permissions
* Fix display of site icons in menu
* Fix height of permissions page container
* Remove unused locale messages
* Set default values for openExternalTabs and tabIdOrigins in account-menu.container
* More code cleanup for LoginPerSite-ui
* Use extensions api to close tab in permissions-connect
* Remove unnecessary change in domIsReady() in contentscript
* Remove unnecessary private function markers and class methods (for background tab info) in metamask-controller.
* Adds getOriginOfCurrentTab selector
* Adds IconWithFallback component and substitutes for appropriate cases
* Add and utilize font mixins
* Remove unused method in disconnect-all.container.js
* Simplify buttonSizeLarge code in page-container-footer.component.js
* Add and utilize getAccountsWithLabels selector
* Remove console.log in ui/app/store/actions.js
* Change last connected time format to yyyy-M-d
* Fix css associated with IconWithFallback change
* Ensure tracked openNonMetamaskTabsIDs are correctly set to inactive on tab changes
* Code cleanup for LoginPerSite-ui
* Use reusable function for modifying openNonMetamaskTabsIDs in background.js
* Enables automatic switching to connected account when connected domain is open
* Prevent exploit of tabIdOriginMap in background.js
* Remove unneeded code from contentscript.js
* Simplify current tab origin and window opener logic using remotePort listener tabs.queryTabs
* Design and styling fixes for LoginPerSite-ui
* Fix permissionHistory and permission logging for eth_requestAccounts and eth_accounts
* Front end changes to support display of lastConnected time in connected and permissions screens
* Fix lint errors
* Refactor structure of permissionsHistory
* Fix default values and object modifications for domain and permissionsHistory related data
* Fix connecting to new accounts from modal
* Replace retweet.svg with connect-white.svg
* Fix signature-request.spec
* Update metamask-inpage-provider version
* Fix permissions e2e tests
* Remove unneeded delay from test/e2e/signature-request.spec.js
* Add delay before attempting to retrieve network id in dapp in ethereum-on=.spec
* Use requestAccountTabIds strategy for determining tab id that opened a given window
* Improve default values for permissions requests
* Add some message descriptions to app/_locales/en/messages.json
* Code clean up in permission controller
* Stopped deep cloning object in mapObjectValues
* Bump metamask-inpage-provider version
* Add missing description in app/_locales/en/messages.json
* Return promises from queryTabs and switchToTab of extension.js
* Remove unused getAllPermissions function
* Use default props in icon-with-fallback.component.js
* Stop passing to permissions controller
* Delete no longer used clear-approved-origins modal code
* Remove duplicate imports in ui/app/components/app/index.scss
* Use URL instead of regex in getOriginFromUrl()
* Add runtime error checking to platform, promise based extension.tab methods
* Support permission requests from external extensions
* Improve font size and colour of the domain origin on the permission confirmation screen
* Add support for toggling permissions
* Ensure getRenderablePermissionsDomains only returns domains with exposedAccount caveat permissions
* Remove unused code from LoginPerSite-ui branch
* Ensure modal closes on Enter press for new-account-modal.component.js
* Lint fix
* fixup! Login Per Site UI (#7368)
* Some code cleanup for LoginPerSite
* Adds UX for connecting to dapps via the connected sites screen (#7593)
* Adds UX for connecting to dapps via the connected sites screen
* Use openMetaMaskTabIds from background.js to determine if current active tab is MetaMask
* Delete unused permissions controller methods
* Fixes two small bugs in the LoginPerSite ui (#7595)
* Restore `providerRequest` message translations (#7600)
This message was removed, but it was replaced with a very similar
message called `likeToConnect`. The only difference is that the new
message has "MetaMask" in it. Preserving these messages without
"MetaMask" is probably better than deleting them, so these messages
have all been restored and renamed to `likeToConnect`.
* Login per site no sitemetadata fix (#7610)
* Support connected sites for which we have no site metadata.
* Change property containing subtitle info often populated by origin to a more accurate of purpose name
* Lint fix
* Improve disconnection modal messages (#7612)
* Improve disconnectAccountModalDescription and disconnectAllModalDescription messages
* Update disconnectAccountModalDescription app/_locales/en/messages.json
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve disconnectAccount modal message clarity
* Adds cancel button to the account selection screen of the permissions request flow (#7613)
* Fix eth_accounts permission language & selectability (#7614)
* fix eth_accounts language & selectability
* fix MetaMask capitalization in all messages
* Close sidebar when opening connected sites (#7611)
The 'Connected Sites' button in the accounts details now closes the
sidebar, if it is open. This was accomplished by pulling the click
handler for that button up to the wallet view component, where another
button already followed a similar pattern of closing the sidebar.
It seemed confusing to me that one handler was in the `AccountsDetails`
container component, and one was handed down from above, so I added
PropTypes to the container component.
I'm not sure that the WalletView component is the best place for this
logic, but I've put it there for now to be consistent with the add
token button.
* Reject permissions request upon tab close (#7618)
Permissions requests are now rejected when the page is closed. This
only applies to the full-screen view, as that is the view permission
requests should be handled in. The case where the user deals with the
request through a different view is handled in #7617
* Handle tab update failure (#7619)
`extension.tabs.update` can sometimes fail if the user interacts with
the tabs directly around the same time. The redirect flow has been
updated to ensure that the permissions tab is still closed in that
case. The user is on their own to find the dapp tab again in that case.
* Login per site tab popup fixes (#7617)
* Handle redirect in response to state update in permissions-connect
* Ensure origin is available to permissions-connect subcomponents during redirect
* Hide app bar whenever on redirect route
* Improvements to handling of redirects in permissions-connect
* Ensure permission request id change handling only happens when page is not null
* Lint fix
* Decouple confirm transaction screen from the selected address (#7622)
* Avoid race condtion that could prevent contextual account switching (#7623)
There was a race condition in the logic responsible for switching the
selected account based upon the active tab. It was asynchronously
querying the active tab, then assuming it had been retrieved later.
The active tab info itself was already in the redux store in another
spot, one that is guaranteed to be set before the UI renders. The
race condition was avoided by deleting the duplicate state, and using
the other active tab state.
* Only redirect back to dapp if current tab is active (#7621)
The "redirect back to dapp" behaviour can be disruptive when the
permissions connect tab is not active. The purpose of the redirect was
to maintain context between the dapp and the permissions request, but
if the user has already moved to another tab, that no longer applies.
* Fix JSX style lint errors
* Remove unused state
* add PermissionsController
remove provider approval controller
integrate rpc-cap
create PermissionsController
move provider approval functionality to permissions controller
add permissions approval ui, settings page
add permissions activity and history
move some functionality to metamask-inpage-provider
rename siteMetadata -> domainMetadata
add accountsChange notification to inpage provider
move functionality to inpage provider
update inpage provider
Remove 'Connections' settings page (#7369)
add hooks for exposing accounts in settings
rename unused messages in non-English locales
Add external extension id to metadata (#7396)
update inpage provider, rpc-cap
add eth_requestAccounts handling to background
prevent notifying connections if extension is locked
update inpage provider
Fix lint errors
add migration
review fixes
transaction controller review updates
removed unused messages
* Login Per Site UI (#7368)
* LoginPerSite original UI changes to keep
* First commit
* Get necessary connected tab info for redirect and icon display for permissioned sites
* Fix up designs and add missing features
* Some lint fixes
* More lint fixes
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Code cleanup for LoginPerSite-ui
* Update e2e tests to use new connection flow
* Fix display of connect screen and app header after login when connect request present
* Update metamask-responsive-ui.spec for new item in accounts dropdown
* Fix approve container by replacing approvedOrigins with domainMetaData
* Adds test/e2e/permissions.spec.js
* Correctly handle cancellation of a permissions request
* Redirect to home after disconnecting all sites / cancelling all permissions
* Fix display of site icons in menu
* Fix height of permissions page container
* Remove unused locale messages
* Set default values for openExternalTabs and tabIdOrigins in account-menu.container
* More code cleanup for LoginPerSite-ui
* Use extensions api to close tab in permissions-connect
* Remove unnecessary change in domIsReady() in contentscript
* Remove unnecessary private function markers and class methods (for background tab info) in metamask-controller.
* Adds getOriginOfCurrentTab selector
* Adds IconWithFallback component and substitutes for appropriate cases
* Add and utilize font mixins
* Remove unused method in disconnect-all.container.js
* Simplify buttonSizeLarge code in page-container-footer.component.js
* Add and utilize getAccountsWithLabels selector
* Remove console.log in ui/app/store/actions.js
* Change last connected time format to yyyy-M-d
* Fix css associated with IconWithFallback change
* Ensure tracked openNonMetamaskTabsIDs are correctly set to inactive on tab changes
* Code cleanup for LoginPerSite-ui
* Use reusable function for modifying openNonMetamaskTabsIDs in background.js
* Enables automatic switching to connected account when connected domain is open
* Prevent exploit of tabIdOriginMap in background.js
* Remove unneeded code from contentscript.js
* Simplify current tab origin and window opener logic using remotePort listener tabs.queryTabs
* Design and styling fixes for LoginPerSite-ui
* Fix permissionHistory and permission logging for eth_requestAccounts and eth_accounts
* Front end changes to support display of lastConnected time in connected and permissions screens
* Fix lint errors
* Refactor structure of permissionsHistory
* Fix default values and object modifications for domain and permissionsHistory related data
* Fix connecting to new accounts from modal
* Replace retweet.svg with connect-white.svg
* Fix signature-request.spec
* Update metamask-inpage-provider version
* Fix permissions e2e tests
* Remove unneeded delay from test/e2e/signature-request.spec.js
* Add delay before attempting to retrieve network id in dapp in ethereum-on=.spec
* Use requestAccountTabIds strategy for determining tab id that opened a given window
* Improve default values for permissions requests
* Add some message descriptions to app/_locales/en/messages.json
* Code clean up in permission controller
* Stopped deep cloning object in mapObjectValues
* Bump metamask-inpage-provider version
* Add missing description in app/_locales/en/messages.json
* Return promises from queryTabs and switchToTab of extension.js
* Remove unused getAllPermissions function
* Use default props in icon-with-fallback.component.js
* Stop passing to permissions controller
* Delete no longer used clear-approved-origins modal code
* Remove duplicate imports in ui/app/components/app/index.scss
* Use URL instead of regex in getOriginFromUrl()
* Add runtime error checking to platform, promise based extension.tab methods
* Support permission requests from external extensions
* Improve font size and colour of the domain origin on the permission confirmation screen
* Add support for toggling permissions
* Ensure getRenderablePermissionsDomains only returns domains with exposedAccount caveat permissions
* Remove unused code from LoginPerSite-ui branch
* Ensure modal closes on Enter press for new-account-modal.component.js
* Lint fix
* fixup! Login Per Site UI (#7368)
* Some code cleanup for LoginPerSite
* Adds UX for connecting to dapps via the connected sites screen (#7593)
* Adds UX for connecting to dapps via the connected sites screen
* Use openMetaMaskTabIds from background.js to determine if current active tab is MetaMask
* Delete unused permissions controller methods
* Fixes two small bugs in the LoginPerSite ui (#7595)
* Restore `providerRequest` message translations (#7600)
This message was removed, but it was replaced with a very similar
message called `likeToConnect`. The only difference is that the new
message has "MetaMask" in it. Preserving these messages without
"MetaMask" is probably better than deleting them, so these messages
have all been restored and renamed to `likeToConnect`.
* Login per site no sitemetadata fix (#7610)
* Support connected sites for which we have no site metadata.
* Change property containing subtitle info often populated by origin to a more accurate of purpose name
* Lint fix
* Improve disconnection modal messages (#7612)
* Improve disconnectAccountModalDescription and disconnectAllModalDescription messages
* Update disconnectAccountModalDescription app/_locales/en/messages.json
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve disconnectAccount modal message clarity
* Adds cancel button to the account selection screen of the permissions request flow (#7613)
* Fix eth_accounts permission language & selectability (#7614)
* fix eth_accounts language & selectability
* fix MetaMask capitalization in all messages
* Close sidebar when opening connected sites (#7611)
The 'Connected Sites' button in the accounts details now closes the
sidebar, if it is open. This was accomplished by pulling the click
handler for that button up to the wallet view component, where another
button already followed a similar pattern of closing the sidebar.
It seemed confusing to me that one handler was in the `AccountsDetails`
container component, and one was handed down from above, so I added
PropTypes to the container component.
I'm not sure that the WalletView component is the best place for this
logic, but I've put it there for now to be consistent with the add
token button.
* Reject permissions request upon tab close (#7618)
Permissions requests are now rejected when the page is closed. This
only applies to the full-screen view, as that is the view permission
requests should be handled in. The case where the user deals with the
request through a different view is handled in #7617
* Handle tab update failure (#7619)
`extension.tabs.update` can sometimes fail if the user interacts with
the tabs directly around the same time. The redirect flow has been
updated to ensure that the permissions tab is still closed in that
case. The user is on their own to find the dapp tab again in that case.
* Login per site tab popup fixes (#7617)
* Handle redirect in response to state update in permissions-connect
* Ensure origin is available to permissions-connect subcomponents during redirect
* Hide app bar whenever on redirect route
* Improvements to handling of redirects in permissions-connect
* Ensure permission request id change handling only happens when page is not null
* Lint fix
* Decouple confirm transaction screen from the selected address (#7622)
* Avoid race condtion that could prevent contextual account switching (#7623)
There was a race condition in the logic responsible for switching the
selected account based upon the active tab. It was asynchronously
querying the active tab, then assuming it had been retrieved later.
The active tab info itself was already in the redux store in another
spot, one that is guaranteed to be set before the UI renders. The
race condition was avoided by deleting the duplicate state, and using
the other active tab state.
* Only redirect back to dapp if current tab is active (#7621)
The "redirect back to dapp" behaviour can be disruptive when the
permissions connect tab is not active. The purpose of the redirect was
to maintain context between the dapp and the permissions request, but
if the user has already moved to another tab, that no longer applies.
* Fix JSX style lint errors
* Remove unused state
* Add additional url verification
* Add commas
* Address PR feedback
* Use URL over URI
* Update key in other languages
* Add stateKey check
* Split validateUrl into two separate methods
* Remove unused variable
* Add isValidWhenAppended method
* Add UseNonce toggle
* Get the toggle actually working and dispatching
* Display nonce field on confirmation page
* Remove console.log
* Add placeholder
* Set customNonceValue
* Add nonce key/value to txParams
* remove customNonceValue from component state
* Use translation file and existing CSS class
* Use existing TextField component
* Remove console.log
* Fix lint nits
* Okay this sorta works?
* Move nonce toggle to advanced tab
* Set min to 0
* Wrap value in Number()
* Add customNonceMap
* Update custom nonce translation
* Update styles
* Reset CustomNonce
* Fix lint
* Get tests passing
* Add customNonceValue to defaults
* Fix test
* Fix comments
* Update tests
* Use camel case
* Ensure custom nonce can only be whole number
* Correct font size for custom nonce input
* UX improvements for custom nonce feature
* Fix advanced-tab-component tests for custom nonce changes
* Update title of nonce toggle in settings
* Remove unused locale message
* Cast custom nonce to string in confirm-transaction-base.component
* Handle string conversion and invalid values for custom nonces in handler
* Don't call getNonceLock in tx controller if there is a custom nonce
* Set nonce details for cases where nonce is customized
* Fix incorrectly use value for deciding whether to getnoncelock in approveTransaction
* Default nonceLock to empty object in approveTransaction
* Reapply use on nonceLock in cases where customNonceValue in approveTransaction.
* Show warning message if custom nonce is higher than MetaMask's next nonce
* Fix e2e test failure caused by custom nonce and 3box toggle conflict
* Update nonce warning message to include the suggested nonce
* Handle nextNonce comparison and update logic in lifecycle
* Default nonce field to suggested nonce
* Clear custom nonce on reject or confirm
* Fix bug where nonces are not shown in tx list on self sent transactions
* Ensure custom nonce is reset after tx is created in background
* Convert customNonceValue to number in approve tranasction controller
* Lint fix
* Call getNextNonce after updating custom nonce
* Delete unused code
* Run threebox imports through migrations
* Remove 3box feature flag
* Remove unnecessary use of 'type' in threebox._updatePlugin
* Fix threebox controller getLastUpdated
* Turn off threebox by default
* Rename restoredFromThreeBox to showRestorePrompt
* Remove accientally added method from threebox controller
* Restore from threebox on import from unlock screen
* Throw on non 404 errors from Box.getconfig in new3Box
Erik Marks
Mark Stacey
ricky
ryanml
Whymarrh Whitby
Thomas Huang
Sirius Tsou
pldespaigne
Dan Finlay
Thomas
ryanml
Dan J Miller