* ENS Reverse Resolution support
* Save punycode for ENS domains with Unicode characters
* Update SenderToRecipient recipientEns tooltip
* Use cached results when reverse-resolving ENS names
* Display ENS names in tx activity log
* Cleanup beforeunload handler after transaction is resolved
The notification window was updated to reject transactions upon close
in #6340. A handler that rejects the transaction was added to
`window.onbeforeunload`, and it was cleared in `actions.js` if it was
confirmed or rejected.
However, the `onbeforeunload` handler remained uncleared if the
transaction was resolved in another window. This results in the
transaction being rejected when the notification window closes, even
long after the transaction is submitted and confirmed. This has been
the cause of many problems with the Firefox e2e tests.
Instead the `onbeforeunload` handler is cleared in the
`componentWillUnmount` lifecycle function, alongside where it's set in
the first place. This ensures that it's correctly unset regardless
of how the transaction was resolved, and it better matches user
expectations.
* Fix indentation and remove redundant export
The `run-all.sh` Bash script now uses consistent indentation, and is
consistent about only re-exporting the Ganache arguments when they
change.
* Ensure transactions are completed before checking balance
Various intermittent e2e test failures appear to be caused by React
re-rendering the transaction list during the test, as the transaction
goes from pending to confirmed. To avoid this race condition, the
transaction is now explicitly looked for in the confirmed transaction
list in each of the tests using this pattern.
* Enable all e2e tests on Firefox
The remaining tests that were disabled on Firefox now work correctly.
Only a few timing adjustments were needed.
* Update Firefox used in CI
Firefox v70 is now used on CI instead of v68. This necessitated
rewriting the function where the extension ID was obtained because the
Firefox extensions page was redesigned.
* Begin mocking out retry ui
* Remove "Failed"
* I guess this works?
* Update corresponding test
* wip
* Ok, this appears to be working now
* cleanup
* Move this back to 3
* I don't think I need this
* Rename showRetry to showSpeedUp
* Address PR feedback
* Remove notes
* Rename shouldShowRetry -> shouldShowSpeedUp
* oops
* Allow default nextNonce to be the custom nonce in cases where highest locally pending is higher than nextNonce
* Reset custom nonce in cases of transaction submission failures
* Make the recommended nonce in the custom nonce field the true 'nextNonce'
* Revert automatic setting of custom nonce to nextNonce
* Make the nextNonce the default placeholder value
* Fix getNextNonce
* Remove unused nonceFieldPlaceholder message
* Fix nits in getPendingNonce and getNextNonce
* Properly handle errors in getNextNonce
* Improve placeholder and value defaults in custom nonce field
* Remove custom error message from getNextNonce
* Add UseNonce toggle
* Get the toggle actually working and dispatching
* Display nonce field on confirmation page
* Remove console.log
* Add placeholder
* Set customNonceValue
* Add nonce key/value to txParams
* remove customNonceValue from component state
* Use translation file and existing CSS class
* Use existing TextField component
* Remove console.log
* Fix lint nits
* Okay this sorta works?
* Move nonce toggle to advanced tab
* Set min to 0
* Wrap value in Number()
* Add customNonceMap
* Update custom nonce translation
* Update styles
* Reset CustomNonce
* Fix lint
* Get tests passing
* Add customNonceValue to defaults
* Fix test
* Fix comments
* Update tests
* Use camel case
* Ensure custom nonce can only be whole number
* Correct font size for custom nonce input
* UX improvements for custom nonce feature
* Fix advanced-tab-component tests for custom nonce changes
* Update title of nonce toggle in settings
* Remove unused locale message
* Cast custom nonce to string in confirm-transaction-base.component
* Handle string conversion and invalid values for custom nonces in handler
* Don't call getNonceLock in tx controller if there is a custom nonce
* Set nonce details for cases where nonce is customized
* Fix incorrectly use value for deciding whether to getnoncelock in approveTransaction
* Default nonceLock to empty object in approveTransaction
* Reapply use on nonceLock in cases where customNonceValue in approveTransaction.
* Show warning message if custom nonce is higher than MetaMask's next nonce
* Fix e2e test failure caused by custom nonce and 3box toggle conflict
* Update nonce warning message to include the suggested nonce
* Handle nextNonce comparison and update logic in lifecycle
* Default nonce field to suggested nonce
* Clear custom nonce on reject or confirm
* Fix bug where nonces are not shown in tx list on self sent transactions
* Ensure custom nonce is reset after tx is created in background
* Convert customNonceValue to number in approve tranasction controller
* Lint fix
* Call getNextNonce after updating custom nonce
* Delete unused code
* Run threebox imports through migrations
* Remove 3box feature flag
* Remove unnecessary use of 'type' in threebox._updatePlugin
* Fix threebox controller getLastUpdated
* Turn off threebox by default
* Rename restoredFromThreeBox to showRestorePrompt
* Remove accientally added method from threebox controller
* Restore from threebox on import from unlock screen
* Throw on non 404 errors from Box.getconfig in new3Box
* Remove unused sendWarnings
The send warnings state and associated component is no longer used
anywhere.
* Remove unused subtitleParams
The `subtitleParams` SendHeader prop was being ignored. It has been
removed, along with associated selectors and tests.
* Adds threebox controller
* Adds threebox approval modal
* Fix unit tests and lint after addition of threebox
* Correct threebox behaviour after rejecting request for backup; fixes e2e tests.
* Update threebox controller for automatic syncing
* Ensure frontend locale updates when preferences are changed via direct update within controller
* Add toggle in settings for 3box syncing
* Update threebox controller for latest 3box version
* Delete unnecessary frontend changes for threebox integration
* Backing up address book contacts with threebox
* Update unit tests for 3box-integration additions
* Only enable threebox by default for new wallets
* Mock globals for correct unit tests
* 3box '1.10.2' -> '^1.10.2'
* Correct capilalization on 3Box
* Use log.debug instead of console.log in threebox controller
* Update yarn.lock
* Remove edge build
* Split 3box module into background deps js file
* extra bundle opts for bg-libs
* sync yarn.lock
* new3Box logic
* Show confirm threebox restore after import
* Remove bg-libs.js from manifest file for dev builds
* Switch 3Box controller to using the spaces api (instead of the profile api)
* Finalize switching to spaces api and only restoring from 3box after import
* Update metamask-controller-test.js for threebox controller changes
* Make threebox modal style consistent with others and update success button wording
* Use mock 3box when in test
* Correct 3box modal header
* Remove unnecessary property of threebox controller provider
* Remove unnecessary method calls after restoration from 3box in the threebox-restore-confirm modal.
* Replace setThreeBoxSyncingPermission calls in routes/index.js with turnThreeBoxSyncingOn
* Replace erroneous use of with
* Replace erroneous use of threeboxSyncing with threeBoxSyncingAllowed in advancted-tab directory
* Lint fixes for 3box changes
* Log errors encountered when updating 3Box
* Remove unnecessary parameter from state update
* Add timeout to initial 3Box sync
The initial 3Box sync will now timeout after 1 minute. If the timeout
is triggered, 3Box is disabled and cannot be re-enabled unless the
initial sync does finally finish. If it never finishes, 3Box cannot
be enabled unless the extension is reinstalled.
The Advanced Settings page was updated to show this option as disabled
in that circumstance, with a new discription explaining why it's
disabled. The UI here could certainly be improved.
Additionally, "on" and "off" labels were added to the toggle to match
the other toggles on the Advanced Settings page.
* Use non-minified 3Box module
We had previously used the minified 3Box module to avoid a build error
encountered when `envify` was processing the `libp2p` module (which is
used by 3Box). The build would fail because `esprima` (used by `envify`)
is incompatible with the object spread/rest operator (which is used in
`libp2p`).
That issue has been solved by adding a global Babelify transformation
specifically for transpiling out the object rest/spread operator from
dependencies. It has been targetted to only affect `libp2p` to avoid
extending the build time too much. This workaround can be used until
a new version of `esprima` is released that includes this bug fix.
* Use app key addresses for threebox
* Replace use of modal for confirming 3box restoration with a home notification
* Adds e2e tests for restoring from threebox
* Update eth-keyring-controller to 5.1.0
* Correct parameters passed to getAppKeyAddress in threebox.js
* Add prefix to origin passed to getAppKeyAddress in threebox.js
* Remove unused locale message.
* Prevent CORS errors in firefox e2e tests
* Ensure extraneous scripts are excluded from the local test dev build
* Move threeBoxLastUpdate state from home.component to redux
* Threebox PR code cleanup
* Always use first address when initializing threebox
* Replace setRestoredFromThreeBox api with setRestoredFromThreeBoxToFalse and setRestoredFromThreeBoxToTrue
* Update development/metamaskbot-build-announce.js to include ui-libs and bg-libs in hard coded bundle list
* Update test/e2e/threebox.spec.js to use new helpers added with pull #7144
* Make setFeatureFlag available on the ui window during testing
* Hide threebox feature behind a feature flag that can only be activated via dev console
* Remove unnecessary migration of threebox feature flag
* Prevent this.init() call in threebox constructor if feature flag is not turned on
* Prevent threebox notification from showing if feature flag is falsy
* http://localhost/8889 -> http://localhost/* in gulp manifest:testing tasks
* Prevent multiple warnings for the same locale message
Our i18n helper issues warnings whenever a requested message is
missing. These warnings are helpful in assisting translation efforts,
but they can be distracting otherwise. They're especially problematic
for locales that are missing many messages. My browser ended up
crashing on more than one occasion due to the sheer volume of warnings.
The warning has been updated to only be issued once per missing key.
This required updating the method to pass in the current locale. The
current locale was added to the warning itself as well, which could be
helpful for cases where a message is missing in both the current locale
and the fallback ('en').
* Change locale and localeMessages as single action
Updating the current locale and the locale messages resulted in two
renders, and during the first the state was inconsistent (it would say
the locale had changed to the new one, but still be using the old set
of locale messages). Instead the locale is now updated with one atomic
action.
This was required after adding the locale to the missing locale message
warning, as otherwise it would say the message was missing from the
wrong locale.
* Create RTL stylesheets using `gulp-rtl`
* Handle RTL stylesheet special cases
Certain blocks of Sass were set to bypass "rtlcss" using ignore
comments. Certain icons had to be flipped 180 degrees.
* Switch stylesheets when locale changes
A second stylesheet has been added to each HTML page for use with
right-to-left locales. It is disabled by default. It is enabled on
startup if a RTL locale is set, and when switching to a RTL locale.
Similarly the LTR stylesheet is disabled when a RTL locale is used.
Unfortunately there is an unpleasant flash of unstyled content when
switching between a LTR and a RTL locale. There is also a slightly
longer page load time when using a RTL locale (<1s difference). We
couldn't think of an easy way to avoid these problems.
* Set `dir="auto"` as default on `TextFields`
* Add missing test descriptions
* Fix async tests that expect a rejection
These tests expected the function under test to return a rejected
promise, and had assertions to be run in the `catch` clause. However,
the tests would still pass if the function didn't reject, with
the assertions never being run.
The tests have been updated to fail if the function doesn't throw.
* Handle ignored promise rejection
In the case where `forceUpdateMetamaskState` rejects, the function
`setSeedPhraseBackedUp` would never resolve. It has been updated to
pass along the rejection instead.
* Return after rejecting promise in action
A few actions would continue after encountering an error, resulting in
errors being compounded. Instead all actions will now return after
encountering an error (which it looks like was the intention in these
cases anyway).
* Nix notification for Share Address
* Add Connections settings tab in place of privacy mode toggle
* Split ProviderApprovalController into two stores
* Remove privacyMode feature flag altogether
* Add migration to remove privacyMode feature flag
* Ensure address book send flow correctly matches address book addresses to ens addresses
* Use nodify on background.setAddressBook to receive correct result in actions.js
* Better error handling for actions.js addToAddressBook
* Eliminate unnecessary data normalization and move more data manipluation to ens-input and send-content containers
* Open backup challenge screen, prompted from notification, in browser window
* Remove no longer used showingSeedPhraseBackupAfterOnboarding related code
* Make incremental-security.spec.js click through the seed phrase success screen
* Implements ability to defer seed phrase backup to later
* Adds incremental-security.spec.js, including test dapp that sends signed tx with stand alone localhost provider
* Update metamask-responsive-ui for incremental account security changes
* Update backup-notification style and fix responsiveness of seed phrase screen
* Remove uneeded files from send-eth-with-private-key-test/
* Apply linguist flags in .gitattributes for send-eth-with-private-key-test/ethereumjs-tx.js
* Improve docs in controllers/onboarding.js
* Clean up metamask-extension/test/e2e/send-eth-with-private-key-test/index.html
* Remove unnecessary newlines in a couple first-time-flow/ files
* Fix import of backup-notification in home.component
* Fix git attrs file
* Style Send Header
* Move Send to-row to send view and restyle
* Add "Recents" group to select recipient view
* Rename SendToRow to AddRecipient
* Basic UI and Layout
* New ENSInput component
* wip - fuzzy search for input
* small refactor
* Add Dialog
* contact list initial
* initial error on invalid address
* clean up edit
* Click to open modal
* Create AddToAddressBookModal component
* Modal styling and layout
* modal i18n
* Add to Addressbook
* ens wip
* ens wip
* ENS Resolution
* Reset input
* Send to explicit address
* Happy Path Complete
* Add back error checking
* Reset send-to when emptying input
* Add back warning object
* Fix linter
* Fix unit test #1 - fix import paths
* Remove dead tests
* One more to go
* Fix all unit tests
* add unit test for reducers and actions
* test rendering AddRecipient
* Add tests for dialog boxes in AddRecipient
* Add test for validating
* Fix linter
* Fix e2e tests
* Token send e2e fix
* Style View Contact
* Style edit-contact
* Fix e2e
* Fix from-import-beta-ui e2e spec
* Make section header say "add recipient” by default
* Auto-focus add recipient input
* Update placeholder text
* Update input title font size
* Auto advance to next step if user paste a valid address
* Ellipsify address when recipient is selected
* Fix app header background color on desktop
* Give each form row a margin of 16px
* Use .container/.component naming pattern for ens-input
* Auto-focus on input when add to addressbook modal is opened; Save on Enter
* Fix and add unit test
* Fix selectors name in e2e tests
* Correct e2e test token amount for address-book-send changes
* Adds e2e test for editing a transaction
* Delete test/integration/lib/send-new-ui.js
* Add tests for amount max button and high value error on send screen to test/e2e/metamask-ui.spec.js
* lint and revert to address as object keys
* add chainId based on current network to address book entry
* fix test
* only display contacts for the current network
* Improve ENS message when not found on current network
* Add error to indicate when network does not support ENS
* bump gaba
* address book, resolve comments
* Move contact-list to its own component
* De-duplicate getaddressbook selector and refactor name selection logic in contact-list-tab/
* Use contact-list component in contact-list-tab.component (i.e. in settings)
* Improve/fix settings headers for popup and browser views
* Lint fixes related to address book updates
* Add 'My accounts' page to settings address book
* Update add new contact button in settings to match floating circular design
* Improve styles of view contact page
* Improve styles and labels of the add-contact.component
* Further lint fixes related to address book updates
* Update unit tests as per address book updates
* Ensure that contact list groups are sorted alphabetically
* Refactor settings component to use a container for connection to redux; allow display of addressbook name in settings header
* Decouple ens-input.component from send context
* Add ens resolution to add contact screen in settings
* Switching networks when an ens address is shown on send form removes the ens address.
* Resolve send screen search for ensAddress to matching address book entry if it exists
* Show resolved ens icon and address if exists (settings: add-contact.component)
* Make the displayed and copied address in view-contact.component the checksummed address
* Default alias state prop in AddToAddressBookModal to empty string
* Use keyCode to detect enter key in AddToAddressBookModal
* Ensure add-contact component properly updates after QR code detection
* Fix display of all recents after clicking 'Load More' in contact list
* Fix send screen contact searching after network switching
* Code cleanup related to address book changes
* Update unit tests for address book changes
* Update ENS name not found on network message
* Add ens registration error message
* Cancel on edit mode takes user back to view screen
* Adds support for memo to settings contact list view and edit screens
* Modify designs of edit and view contact in popup environment
* Update settings content list UX to show split columns in fullscreen and proper internal navigation
* Correct background address book API usages in UI
`seedWords` used to be stored on the metamask state temporarily at
certain points. This hasn't been the case since #5994, but references
to this state remained. All of the logic remained for correctly updating
these `seedWords`, handling them during navigation, and scrubbing them
from the state.
However the state was never updated in practice. The `seedWords` are
still returned by `verifySeedPhrase`, and they're still stored in
component state in a few places. But they aren't ever set in the Redux
metadata state or the Preferences controller.
All references to this state have been removed, along with any logic
for interacting with this state. A few unused actions were removed as
well.
Unused expressions are generally a mistake, as they don't do anything.
The exceptions to this rule (short-circuit expressions and ternary
expressions) have been allowed.
The `webrtc-adapter` was previously ignored by eslint because it has a
side-effect upon being imported. I removed the local variable instead,
which should preserve the same side-effect without making eslint
complain.
* Add React and Redux DevTools
* Conditionally load react-devtools
* Add start:dev npm script to run the app with devtools
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
While working on #6805, I noticed that many variables were being used
before they were declared. Technically this worked fine in practice
because we were using the `transform-es2015-block-scoping` Babel plugin,
which transforms `let` and `const` to `var`, which is hoisted. However,
after removing that Babel transformation, many things broke.
All instances of variables or classes being used before declared have
been fixed.
The `no-use-before-define` eslint rule has been added to catch these
cases going forward. The rule is disabled for function declarations for
the moment, because those are always hoisted. We could disable that too
if we want to, but it's purely stylistic and would require a lot more
changes.
* Adds 4byte registry fallback to getMethodData() (#6435)
* Adds fetchWithCache to guard against unnecessary API calls
* Add custom fetch wrapper with abort on timeout
* Use opts and cacheRefreshTime in fetch-with-cache util
* Use custom fetch wrapper with timeout for fetch-with-cache
* Improve contract method data fetching (#6623)
* Remove async call from getTransactionActionKey()
* Stop blocking confirm screen rendering on method data loading, and base screen route on transactionCategory
* Remove use of withMethodData, fix use of knownMethodData, in relation to transaction-list-item.component
* Load data contract method data progressively, making it non-blocking; requires simplifying conf-tx-base lifecycle logic.
* Allow editing of gas price while loading on the confirm screen.
* Fix transactionAction component and its unit tests.
* Fix confirm transaction components for cases of route transitions within metamask.
* Only call toString on id if truthy in getNavigateTxData()
* Fix knownMethodData retrieval and data fetching from fourbyte
* Add networks tab to settings, with header.
* Adds network list to settings network tab.
* Adds form to settings networks tab and connects it to network list.
* Network tab: form adding and editing working
* Settings network form properly handles input errors
* Add translations for settings network form
* Clean up styles of settings network tab.
* Add popup-view styles and behaviour to settings network tab.
* Fix save button on settings network form
* Adds 'Add Network' button and addMode to settings networks tab
* Lint fix for settings networks tab addition
* Fix navigation in settings networks tab.
* Editing an rpcurl in networks tab does not create new network, just changes rpc of old
* Fix layout of settings tabs other than network
* Networks dropdown 'Custom Rpc' item links to networks tab in settings.
* Update settings sidebar networks subheader.
* Make networks tab buttons width consistent with input widths in extension view.
* Fix settings screen subheader height in popup view
* Fix height of add networks button in popup view
* Add optional label to chainId and symbol form labels in networks setting tab
* Style fixes for networks tab headers
* Add ability to customize block explorer used by custom rpc
* Stylistic improvements+fixes to custom rpc form.
* Hide cancel button.
* Highlight and show network form of provider by default.
* Standardize network subheader name to 'Networks'
* Update e2e tests for new settings network form
* Update unit tests for new rpcPrefs prop
* Extract blockexplorer url construction into method.
* Fix broken styles on non-network tabs in popup mode
* Fix block explorer url links for cases when provider in state has not been updated.
* Fix vertical spacing of network form
* Don't allow click of save button on network form if nothing has changed
* Ensure add network button is shown in popup view
* Lint fix for networks tab
* Fix block explorer url preference setting.
* Fix e2e tests for custom blockexplorer in account details modal changes.
* Update integration test states to include frequentRpcList property
* Fix some capitalizations in en/messages.json
* Remove some console.logs added during custom rpc form work
* Fix external account link text and url for modal and dropdown.
* Documentation, url validation, proptype required additions and lint fixes on network tab and form.
* eslint: Check for unused function arguments
* eslint: Ignore unused '_' in argument list
Also allow any number of '_' e.g., '__' or '___' which is to be used sparingly
* Remove and rename unused arguments
* Add i18n strings
* Finish Auto timeout
* Fix linter
* Fix copies
* Add unit test to Advanced Tab component
* Add back actions and container
* Add basic test to ensure container completeness
* No zero, fix linters
* restrict negative in input
* Ensure home screen does not render if there are unapproved txs (#6501)
* Ensure that the confirm screen renders before the home screen if there are unapproved txs.
* Only render confirm screen before home screen on mount.
* inpage - revert _metamask api to isEnabled isApproved isUnlocked
* Move send to pages/
* Fix unit tests
* Finish UI
* Integrate asset dropdown to send actions
* Remove console.log
* Hide asset change during edit
* Enable switch from send token to seand eth
* Enable switching from token to eth when editing
* Fix linter
* Fixing test
* Fix unit tests
* Fix linter
* Fix react warning; remove console.log
* fix flat test
* Add metrics
* Address code review comments
* Consistent spacing between send screen form rows.
* Reduce height of gas buttons on send screen.
* Make send screen gas button height dependent on size of contents.