Resolves three different style issues due to overflow of content
and addresses an issue where UI was being squished due to available
screen real estate.
- On the choose account modal, when a user has enough accounts to need
to scroll within the account chooser, the last-connected data column
was squished. This is resolved by using a tooltip and icon for this data
rather than text printed in column.
- On the connection permission result screen where it shows the Dapp icon ->
Metamask icon, the bottom of the logos and dropshadows were being cut off
this was resolved by removing the height set on this element and allowing
it to fill the available space.
- On the confirmation screen the content appeared off center due to the scrollbar being overlayed instead of auto. This was resolved by removing some of the setting of manual overflow controls on the body element.
Tokens are now updated when the account switches after a failed account
import. The usual account switching flow (via the account menu) already
updated tokens, but this step was omitted when the account switched
after a failed import.
A race condition exists where after adding an unapproved transaction,
it could be mutated and then replaced when the default gas parameters
are set. This happens because the transaction is added to state and
broadcast before the default gas parameters are set, because
calculating the default gas parameters to use takes some time.
Once they've been calculated, the false assumption was made that the
transaction hadn't changed.
The method responsible for setting the default gas now retrieves an
up-to-date copy of `txMeta`, and conditionally sets the defaults only
if they haven't yet been set.
This race condition was introduced in #2962, though that PR also added
a loading screen that avoided this issue by preventing the user from
interacting with the transaction until after the gas had been
estimated. Unfortunately this loading screen was not carried forward to
the new UI.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
Previously a transaction would get assigned a default value during the
`addTxGasDefaults` function, after the transaction was added and sent
to the UI.
Instead the transaction is assigned a default value before it gets
added. This flow is simpler to follow, and it avoids the race condition
where the transaction is assigned a value from the UI before this
default is set. In that situation, the UI-assigned value would be
overridden, which is obviously not desired.
`analyzeGasUsage` now returns the results of the analysis rather than
setting them directly on `txMeta`. The caller is now responsible for
mutating `txMeta` instead. Functionally this should be identical to
before.
The simple send gas estimation has been moved out of the gas estimation
module, and into the transaction controller. This was done in an effort
to limit the number of places where `txMeta` is mutated while the
default gas parameters are being set.
The test for receiving ETH from a contract had been clicking on the
first transaction list item, assuming it was pending. This is not
necessarily true; if the pending transaction hadn't yet been rendered,
this could select the first confirmed transaction instead.
The test has been updated to look for the first _pending_ transaction,
rather than just the first transaction.
Note that this likely does not fix the intermittent failure we've been
experiencing. The failure has been observed with this fix in place.
This test would occasionally fail due to a fluke of timing, where a
pending transaction would take slightly longer than expected to
be rendered in the "confirmed transactions" list. This `wait` block
ensures the test will try again until it has confirmed.
The test artifact directory for failed test "verbose reports" was
mistakenly being set to `[browser]/undefined`. This was broken during
the refactor in #7798, when the `driver` parameter was mistakenly left
in after the `verboseReportOnFailure` function was converted to a
method being called on `driver`.
An alert is now shown when the user switches from an account that is
connected to the active tab to an account that is not connected. The
alert prompts the user to dismiss the alert or connect the account
they're switching to.
The "loading" state is handled by disabling the buttons, and the error
state is handled by displaying a generic error message and disabling
the connect button.
The new reducer for this alert has been created with `createSlice` from
the Redux Toolkit. This utility is recommended by the Redux team, and
represents a new style of writing reducers that I hope we will use more
in the future (or at least something similar). `createSlice` constructs
a reducer, actions, and action creators automatically. The reducer is
constructed using their `createReducer` helper, which uses Immer to
allow directly mutating the state in the reducer but exposing these
changes as immutable.
`removeFromAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers were updated to `await` the completion of this operation.
`addToAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers of this action creator were updated to `await` the
completion of the operation. It was called just before redirecting the
user to a different page or closing a modal, and it seemed appropriate
to wait before doing those things.
`editRpc` returned a thunk that didn't return a Promise, despite doing
async work. It now returns a Promise.
In the one place where this is used, it didn't seem important to update
the callsite to block on this finishing. Only one call followed it in
the event handler, and it didn't seem to depend on this.
`updateAndSetCustomRpc` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
In the one place where this is used, it didn't seem important to update
the callsite to block on this finishing. Only one call followed it in
the event handler, and it didn't seem to depend on this.
The `getSelectedAddress` selector has a fallback of selecting the first
MetaMask account. This is not useful. The only time the
`selectedAddress` is not set is during onboarding, before any accounts
exist, so selecting the first account wouldn't be useful anyway.
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
`setRpcTarget` returned a thunk that didn't return a Promise, despite
doing async work. It now returns a Promise.
The callers of this action creator didn't need to be updated, as they
were all in event handlers that didn't require knowing when the
operation had completed.
`editRpc` returned a thunk that didn't return a Promise, despite doing
async work. It now returns a Promise.
In the one place where this is used, it didn't seem important to update
the callsite to block on this finishing. Only one call followed it in
the event handler, and it didn't seem to depend on this.
Changes to the background state were being detected in the `update`
event handler in `ui/index.js` that receives state updates from the
background. However this doesn't catch every update; some state
changes are received by the UI in-between these `update` events.
The background `getState` function is callable directly from the UI,
and many action creators call it via `forceUpdateMetamaskState` to
update the `metamask` state immediately without waiting for the next
`update` event. These state updates skip this change detection in
`ui/index.js`.
For example, if a 3Box state restoration resulted in a `currentLocale`
change, and then a `forceUpdateMetamaskState` call completed before the
next `update `event was received, then `updateCurrentLocale` wouldn't
be called, and the `locale` store would not be updated correctly with
the localized messages for the new locale.
We now check for background state changes in the `updateMetamaskState`
action creator. All `metamask` state updates go through this function,
so we aren't missing any changes anymore.
The page tested by the benchmark was changed from `notification` to
`home` in #8358, but the announce script was still expecting the
`notification` page to be in the results. It does collect results for
all pages, but the `notification` page was hard-coded to be used for
the benchmark summary.
The announce script now correctly looks for the `home` page results for
the benchmark summary. Variable names have been updated to make it more
clear what's going on here as well.
`setProviderType` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
None of the callers of this action creator needed to know when it
completed, so no changes to the call sites were made.
A simple default store of `{ metamask: {} }` is now used for the
actions tests.
While I would prefer that any expectations about the store be included
in each test, the mere existence of this `metamask` object seems like
a fairly reasonable default, as it's (hopefully) impossible for it to
be unset at runtime.
The `2-state.json` test state file was deleted as well, as it was no
longer used.
These action creators for the "message manager" controller
interactions have been updated to use `async/await`. There should be
almost no changes in behavior. The only things removed were a few debug
log statements, and a single `console.log`.
Many of the "message manager" background methods return a full copy of
the background state in their response; presumably to save us from
making a full round-trip to update the UI `metamask` state after it
changes. However, the action creators responsible for calling these
methods were calling `updateMetamaskState` even when the background
method failed. In effect, they were setting the UI `metamask` state to
`undefined`.
They have been updated to only set the UI `metamask` state if the
background method succeeded.
`setSelectedAddress` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
This action creator was only called in two places, and neither benefit
from using the Promise now returned. They were both event handlers. In
both cases there was an existing Promise chain, but the only thing
after this set was a `catch` block that displayed any error
encountered. I decided not to return the result of `setSelectedAddress`
to this chain, because all it would do is set the warning a second
time in the event of failure.
Erik Marks
Brad Decker
Erik Marks
Whymarrh Whitby
Mark Stacey