These two functions were not especially useful. `tOrDefault` was used
only by `tOrKey`, and `tOrKey` was only used in one place. All it did
was return the given `key` directly if it was falsey, so it was easily
replaced by a condition.
Previously a few mostly-empty `div`s would be shown if a render
happened while the confirm page was loading. Now nothing is shown. This
shouldn't impact users at all, as this condition should only last a
fraction of a second.
The address is blank momentarily when navigating to the confirmation
screen when sending a token. The address is updated in a subsequent
render.
The ENS reverse resolution is now only attempted if the address is
given. It has also been updated to attempt resolution when the address
is finally set, which fixes the reverse resolution for token sends.
I had hoped to get rid of this interim render-without-address, but that
turned out to be a bit more challenging. The problem is that the UI
submits transactions through the provider just as a dapp would, and the
provider doesn't say when the transaction is submitted. The promise
returned doesn't resolve until after confirmation. We would have to
start calling the background methods directly and bypass the provider
to get the feedback we need, and that sounded potentially dangerous.
Definitely a challenge for another day.
The `metamask.send.from` field was assumed by various selectors to be
an object, but instead it was recently set to a string. The selectors
have been updated to assume it's a string, and to fetch the full
account object explicitly.
The selector `getSendFromObject` was repurposed for this, as that's
basically what it already did. The optional address parameter was
removed though, as that was only used to fetch the `from` address in
cases where the `send` state was set without there being a `from`
address set. That case is no longer possible, as the `from` address is
always set upon the initialization of the `send` state.
The `getSendFromObject` selector no longer fetches the 'name' of that
address from the address book state either. This property was not used
in either of the cases this selector was used.
* Update i18n-helper to allow substitutions of react components and wrapping of translation substrings
* Simplify code in i18n-helper.js related to substitutions, including react substitutions.
* Remove wrapper support from i18n in favour of using translations in substitutions.
* Fix i18n-helper substitution logic: ensure correct index of substitution is applied
* Throw error if there are not enough substitutions for a translation phrase
* Adds unit tests for now i18n-helper substitution functionality
* Fix grammar, react element line spacing and test layout+readability in i18n-helper.test.js
The "Transaction View" component has been merged with the Home
component. The division between these two components seemed wrong
because the "Transaction View" contained the menu bar (distinctly a
"home" thing, not a "transaction" thing), and we will be adding more
non-transaction-related components shortly.
This also let us use a single `Media` component instead of two.
The notifications displayed on the home screen were being passed
through the `TransactionView` and `TransactionList` components before
being rendered. This was unnecessary because the notifications are
absolutely positioned.
They are now rendered directly in the home component where they're
defined. A helper function has been written to improve readability.
The styles used for the Home component were in the huge
"newui-sections" SCSS file. Instead they've been moved into an SCSS
module alongside the component, to follow our conventions.
The `main-container` class was left as-is because it is shared between
here and the settings page.
Implement `eth_decrypt` and `eth_getEncryptionPublicKey`. This allows decryption backed by the user's private key. The message decryption uses a confirmation flow similar to the messaging signing flow, where the message to be decrypted is also able to be decrypted inline for the user to read directly before confirming.
ENS currently supports a variety of tlds in addition to `.eth`, and
more will be supported in the future. Rather than hard-code a list of
supported ENS tlds, all valid domain names will now be interpreted as
potential ENS addresses in our address input component.
Closes#7978
The QR scanner component error handling would sometimes redirect the
user to the wrong page. It was also confusingly handled in two places;
the action used to open the QR scanner, and the scanner component.
The error handling has now been corrected, simplified, and integrated
into the QR scanner component itself.
The old way of handling an error within the component was to close the
modal, then call the action to open it all over again. This action took
a route parameter, which instructed the action on which route to open
if the fullscreen UI needed to be opened (as the fullscreen UI is the
only one where the browser will show the camera permission prompt).
This redirection worked just fine for handling the initial opening
of the QR scanner modal. But for any subsequent errors the same action
was used with a _default route_, meaning the user could click "try
again" and find themselves on a completely different screen.
Instead, errors now trigger a state change instead of closing and re-
opening the modal. The permission checks in the action have been
integrated into the component as well.
One functional change is that the scenario where you have an invalid
QR code has been made an error. Previously this just showed the error
message below the video preview, but left the user with no way to try
again. There error page has a "Try again" button, so it seemed better
suited as an error. Also the message literally started with "Error:".
Another functional change is that _all_ errors during initialization
will result in the error UI being shown. Previously there was one error
case that would instead log to the console and leave the user stuck.
* Use @metamask/eslint-config@1.1.0
* Use eslint-plugin-mocha@6.2.2
* Mark root ESLint config as root
* Update Mocha ESLint rules with shared ESLint config
* Various component tests and some conditional statements
Conditional in account-menu in removeAccount when keyring sometimes is not initially provideed
Conditional on unlock-page when there is no target.getBoundingClientRect on the element.
* Update helpers
* Remove component debugging
* Add default params for render helpers
* Remove stubComponent for old Mascot
Changes in https://github.com/MetaMask/metamask-extension/pull/7893 has prevented the need to stub it out.
Change logout to lock in account-menu test
The custom spend limit was previously not validated. It did have a
minimum of zero set, but this didn't have any affect (that minimum is
used for form constraint validation, and this field wasn't in a form).
The field was never checked to ensure the contents didn't exceed the
maximum.
The field is now checked for values that exceed the maximum, and
invalid values in general (including negative values).
The parameters to the `showEditApprovalPermissionModal` were also
alphabetized to make them easier to read. In the course of doing this,
I noticed that the origin was missing from one of the calls. This was
responsible for the modal saying "Spend limit requested by undefined"
when clicking "Edit" under the transaction details. This has been
fixed.
These two functions differ slightly in options, but none of those
options are being used by us, so in these cases they're functionally
equivalent. They're even both descendants of the original `debounce`
function from `underscore`.
This was done to reduce the number of direct dependencies we have. It
should not affect bundle size, as we still depend upon the `debounce`
package transitively.
In the case where the initial spend limit for the `approve` function
was set to the maximum amount, editing this value would result in the
new limit being silently ignored. The transaction would be submitted
with the original max spend limit.
This occurred because function to generate the new custom data would
look for the expected spend limit in the existing data, then bail if
it was not found (and in these cases, it was never found).
The reason the value was not found is that it was erroneously being
converted to a `Number`. A JavaScript `Number` is not precise enough to
represent larger spend limits, so it would give the wrong hex value
(after rounding had taken place in the conversion to a floating-point
number).
The data string is now updated without relying upon the original token
value; the new value is inserted after the `spender` argument instead,
as the remainder of the `data` string is guaranteed to be the original
limit. Additionally, the conversion to a `Number` is now omitted so
that the custom spend limit is encoded correctly.
Fixes#7915
After updating the custom spend limit on the approve screen, the data
for the transaction was not being updated. Instead it showed the
original transaction data. The transaction data was being updated
correctly in the final transaction though.
The approve screen has been updated to ensure changes to the custom
spend limit are reflected correctly in the data shown.
* Update lodash
All versions of the full `lodash` package have been updated to 4.17.15.
The only exception is v4.17.14 which is pinned by `ganache-core`.
* Switch to using `lodash` instead of per-method packages
We have the full lodash package _ten times_ as a production transitive
dependency, so including per-method packages is not saving space (it
might instead result in slightly more space being used).
Any error caught during a React component render or lifecycle method
will now be caught by the top-level error boundary, which shows the
user this new error page. The error page will display a simple error
message, and will show the details of the error in a collapsible
section.
The caught error is also reported to Sentry.
In development the error will be re-thrown to make it easier to see on
the console, but it is not re-thrown in production.
* Remove unnecessary `getEnvironmentType` parameter
The default value of the first parameter is `window.location.href`, so
there is no need to pass it in explicitly.
* Remove junk parameter from `getEnvironmentType` invocation
`getEnvironmentType` doesn't need to be passed any parameter, as the
default value is `window.location.href` which is generally what is
wanted. In this case, the variable `location.href` was always
`undefined` anyway. This particular `location` variable is from React
Router, and does not have an `href` property.
* Fix comment for `getEnvironmentType`
One of the possible return values was referred to by the wrong name.
`withRouter` has been removed from any components that were not using
any of the three props injected by `withRouter`: `history`, `location`,
and `match`.
`compose` is a no-op when called upon a single component, so it has
been removed in all such cases.
The filename is seeded by a simple use of Math.random() pulling from an alphanumeric character bank, as opposed to a more cryptographically random solution. This provides a simple layer of difficulty for bad actors to seek out the recovery phrase file.
Mark Stacey
ricky
Brad Decker
Thomas Huang
Dan J Miller
Erik Marks
ryanml
Whymarrh Whitby
Konstantin
Jenny Pollack
Dan Finlay
William Morriss
ryanml
Brandon Lucas