The e2e test for the contract deposit action was unnecessarily reliant
upon timing. After initiating a deposit, it would grab the first
transaction in the transaction list and assume it was the deposit that
it had just initiated. If it looked prior to the unapproved transaction
being added to the list, it would grab the wrong transaction.
It now looks specifically for _unconfirmed_ transactions, meaning it
will block until the deposit transaction is rendered.
This was discovered in testing a test-dapp PR:
https://github.com/MetaMask/test-dapp/pull/76
* Only shows the swaps intro popup on mainnet
* Remove code that closes swaps popup from e2e tests
* correct casing on isMainnet prop in home component
* Remove network config store
* Remove inline networks variable in network controller
* Re-key network controller 'rpcTarget' to 'rpcUrl'
* Require chainId in lookupNetwork, implement eth_chainId
* Require chain ID in network form
* Add alert, migrations, and tests
* Add chainId validation to addToFrequentRpcList
* Update public config state selector to match new network controller
state
* Use network enums in networks-tab.constants
* Ensure chainId in provider config is current
* Update tests
* Fix require-unicode-regexp issues
See [`require-unicode-regexp`](https://eslint.org/docs/rules/require-unicode-regexp) for more information.
This change enables `require-unicode-regexp` and fixes the issues raised by the rule.
* Remove case-insensitive flag from regexps
This one gets a bit more complicated because the styles were interwoven and needed to be untangled to be moved. Essentially, though, the goal is to put the styles where they make the most sense and colocate them with their components.
Both the primary and secondary balance components on `EthOverview` now
have `data-testid` props, so that they can be more easily referenced in
e2e tests.
This required the addition of a `data-testid` prop to the component
`UserPreferencedCurrencyDisplay`, which is passed through to the
underlying `CurrencyDisplay` component.
The webdriver method `verboseReportOnFailure` had previously taken a
single parameter, `test`, which was an object representing the current
Mocha test. However, only one property was used (`title`).
Instead the `title` is now passed through directly. This was done to
make this function easier to use outside of a Mocha context.
'Activity' is a better name for this tab because it contains more than
just transactions. Signature requests are also included, and more non-
transaction activity may be included in the future.
* refactor asset items to use list-item
Refactors the asset-list-item and token-cell to rely on the list-item
component for UI. Little changes were needed to the list-item code
to make this work! The result should be lots of eliminated code
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The "the transaction has the expected gas price" test was assuming the
fifth element with the `transaction-breakdown__value` class was the
element with the gas price. In practice that was sometimes not the
case, because some transaction detail fields would not be present, or
would appear after the first render.
The field is now looked up with a test id, ensuring it always finds the
correct field.
The e2e test for the "Hide token" functionality was incorrectly
clicking "Cancel" on the "Hide token" modal, thus not actually testing
that that token was hidden at all.
The "Confirm" button is now selected using a test id, to ensure the
wrong button isn't selected.
This reverts commit 466ece4588, which has
the message:
"Revert "Merge pull request #7599 from MetaMask/Version-v7.7.0" (#7648)"
This effectively re-introduces the changes from the "LoginPerSite" PR.
A new page has been created for viewing assets. This replaces the old
`selectedToken` state, which previously would augment the home page
to show token-specific information.
The new asset page shows the standard token overview as seen previously
on the home page, plus a history filtered to show just transactions
relevant to that token.
The actions that were available in the old token list menu have been
moved to a "Token Options" menu that mirrors the "Account Options"
menu.
The `selectedTokenAddress` state has been removed, as it is no longer
being used for anything.
`getMetaMetricState` has been renamed to `getBackgroundMetaMetricState`
because its sole purpose is extracting data from the background state
to send metrics from the background. It's not really a selector, but
it was convenient for it to use the same selectors the UI uses to
extract background data, so I left it there for now.
A new Redux store has been added to track state related to browser history.
The most recent "overview" page (i.e. the home page or the asset page) is
currently being tracked, so that actions taken from the asset page can return
the user back to the asset page when the action has finished.
The fullscreen UI now shows roughly the same design as the popup UI.
A few additional changes depicted in the new fullscreen designs will
be implemented in subsequent PRs (e.g. the inline buttons on assets)
This was done now to make asset pages easier to implement. Implementing
asset pages solely for the popup UI would have been complicated by the
fact that we use viewport size to switch between the two layouts, so we
would have had to re-route upon resizing the window.
The `TransactionViewBalance` component has been split into three
separate components. This was done primarily to make the asset page
easier to implement. Also the name `TransactionViewBalance` didn't
describe this component very well anymore.
Instead of the Ethereum and token-specific logic being in the same
component, the two cases were split into the `EthOverview` and
`TokenOverview` components respectively. They both use the
`WalletOverview` component, which has the structure shared by both
cases.
All asset list items now use the same component (`AssetListItem`).
Previously the tokens and the Ethereum balance were totally separate
components, despite being styled similarly.
Various unnecessary DOM elements and style rules were removed, but the
overall list looks identical to how it looked before.
The test for receiving ETH from a contract had been clicking on the
first transaction list item, assuming it was pending. This is not
necessarily true; if the pending transaction hadn't yet been rendered,
this could select the first confirmed transaction instead.
The test has been updated to look for the first _pending_ transaction,
rather than just the first transaction.
Note that this likely does not fix the intermittent failure we've been
experiencing. The failure has been observed with this fix in place.
This test would occasionally fail due to a fluke of timing, where a
pending transaction would take slightly longer than expected to
be rendered in the "confirmed transactions" list. This `wait` block
ensures the test will try again until it has confirmed.
The test artifact directory for failed test "verbose reports" was
mistakenly being set to `[browser]/undefined`. This was broken during
the refactor in #7798, when the `driver` parameter was mistakenly left
in after the `verboseReportOnFailure` function was converted to a
method being called on `driver`.
* Add UI for selecting multiple accounts on the first permissions connect screen
* Make accounts list scrollable on connect screen
* Change title wording on connect screen to 'select your accounts'
* Add select all tooltip to info circle on top of connect screen account list
* Add security info footer to the first screen of the connect flow
* Apply redesigns to page 2 of connect flow
* Display number of accounts on connect flow second screen if there are multiple to connect
* Update e2e tests for connect screen multi-select changes
* Remove unused chooseAnAcount message
* Fix styling/display of redirect elements on second page of connect flow
* Assorted small fixes in permissions connect
* Remove unnecessary tiny delays in spec files
* Remove incorrect use of bem modified in choose-account
* Remove unused locale
* Use Set for managing selected accounts in choose-acount and permissions-connect componets
* Compone!
* Move connect flow header into a reusable component, and implement new header designs
* Update locales and add missing locales
* Improve permission list item design (second screen of connect flow)
* Check box component improvements
* Fixes in variables.scss
* Simplfy code in selectAll of choose-account.component
* Hide checkboxes on first pages on connect flow when there is only one account
* Allow autofill of default new account modal text with right arrow
* Disable next button on first screen of connect flow when no accounts selected
* Improve choose-account/index.scss
* Remove metamask secure graphic
* Fix connect flow redirect screen
* Fix connectToMultiple locale
* Remove locales no longer used after connect flow multiple connect updates
* Fix size of dapp icon on redirect screen of connect flow
* Clean up choose-account code
* Stop using placeholder in new-account-modal
* Remove unused styles in permission-page-container/index.scss
* Pass origin instead of site name to PermissionsConnectHeader in connect flow
* Make iconName a required prop in permissions-connect-header
* Show checkbox in cases where there is one account in the choose-account list
* Do not render select all checkbox when only 1 list item, instead of just hiding it
* Small cleanup in choose-account/index.scss
The 'Add Token' component has been redesigned to be more in-line with
the new home screen design. The description instructing the user to
click the 'Add Token' button has been removed, and the section itself
has been made roughly the same size as one of the list item. The text
now appears on just one line, overflowing to two if necessary.
The styles for the TokenCell component have been moved to be alongside
the component. They have also been renamed from `token-list-item` to
match the component name.
* Use @metamask/eslint-config@1.1.0
* Use eslint-plugin-mocha@6.2.2
* Mark root ESLint config as root
* Update Mocha ESLint rules with shared ESLint config
The 'can retype the seed phrase' test would fail sometimes when one of
the words in the seed phrase was a subset of another word (e.g. 'issue'
and 'tissue'). This is because the selector used to find the word
looked for the first element that contained the text, rather than an
exact match.
To simplify the selector and make it more reliable, test ids were added
to each seed phrase word. The selector now uses CSS instead of XPath,
and it only finds exact matches.
A test id was also added to the div containing the shuffled seed words
to select from, so that the chosen seed words wouldn't be selected
in place of the real target when the same word appears twice.
* Wait until element is clickable before clicking in e2e tests
A new `findClickableElement` has been added to the webdriver to allow
finding an element and blocking until it's both visible and enabled.
This is now used by the pre-existing `clickElement` method as well.
All cases where something is clicked in the e2e tests have been
updated to use one of these methods, to ensure we don't run into
intermittent failures when loading screens take longer than usual.
These rows on the Advanced Settings page were being looked up in the
e2e tests by the order they appeared in. Instead they're now referenced
by data id, so that we can add new settings and re-arrange them without
breaking the e2e tests.
The transaction navigation in the e2e tests has been made simpler with
the addition of data attributes to help with finding the navigation
buttons. Each button is now labelled according to its purpose.
These tests were updated in #7473 to navigate in a different order,
because the transaction order changed. Unfortunately this meant that
a second contract deployment was being confirmed, where it was
previously being rejected.
This updates the test to ensure the same transaction is rejected and
confirmed as prior to the change in #7473
Erik Marks
Mark Stacey
Dan J Miller
Brad Decker
ricky
Whymarrh Whitby
kumavis
ryanml