issue.description="This contract delegates execution to a contract address in storage slot "+str(idx)+". This storage slot can be written to by calling the function '"+func+"'. "
issue.description="This contract delegates execution to a contract address in storage slot "+str(idx)+". This storage slot can be written to by calling the function `"+func+"`. "
else:
logging.debug("[DELEGATECALL] No storage writes to index "+str(idx))
description="A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. "
description+="This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking. "
description+="This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking. "
debug="The exception is triggered under the following conditions:\n\n"
@ -19,7 +19,7 @@ Detection modules, ideas collection and wish list. Contributions are welcome!
|Transaction order dependence| | | [Front Running](https://consensys.github.io/smart-contract-best-practices/known_attacks/#transaction-ordering-dependence-tod-front-running) |
|Information exposure| | | |
|Complex fallback function (uses more than 2,300 gas) | A too complex fallback function will cause send() and transfer() from other contracts to fail. To implement this we first need to fully implement gas simulation. | |
|Use require() instead of assert() | Use `assert()` only to check against states which should be completely unreachable. | [Exceptions](mythril/analysis/modules/exceptions.py) | [Solidity docs](https://solidity.readthedocs.io/en/develop/control-structures.html#error-handling-assert-require-revert-and-exceptions)|
|Use `require()` instead of `assert()` | Use `assert()` only to check against states which should be completely unreachable. | [Exceptions](mythril/analysis/modules/exceptions.py) | [Solidity docs](https://solidity.readthedocs.io/en/develop/control-structures.html#error-handling-assert-require-revert-and-exceptions)|
|Use of depreciated functions | Use `revert()` instead of `throw()`, `selfdestruct()` instead of `suicide()`, `keccak256()` instead of `sha3()` | | |
|Detect tautologies| Detect comparisons that always evaluate to 'true', see also [#54](https://github.com/ConsenSys/mythril/issues/54) | |
|Call depth attack| Depreciated | | [EIP 150 Hard Fork](https://consensys.github.io/smart-contract-best-practices/known_attacks/#call-depth-attack-deprecated)|
"description":"This contract executes a message call to an address found at storage slot 1. This storage slot can be written to by calling the function '_function_0x2776b163'. Generally, it is not recommended to call user-supplied adresses using Solidity's call() construct. Note that attackers might leverage reentrancy attacks to exploit race conditions or manipulate this contract's state.",
"description":"This contract executes a message call to an address found at storage slot 1. This storage slot can be written to by calling the function `_function_0x2776b163`. Generally, it is not recommended to call user-supplied adresses using Solidity's call() construct. Note that attackers might leverage reentrancy attacks to exploit race conditions or manipulate this contract's state.",
This contract executes a message call to an address found at storage slot 1. This storage slot can be written to by calling the function '_function_0x2776b163'. Generally, it is not recommended to call user-supplied adresses using Solidity's call() construct. Note that attackers might leverage reentrancy attacks to exploit race conditions or manipulate this contract's state.
This contract executes a message call to an address found at storage slot 1. This storage slot can be written to by calling the function `_function_0x2776b163`. Generally, it is not recommended to call user-supplied adresses using Solidity's call() construct. Note that attackers might leverage reentrancy attacks to exploit race conditions or manipulate this contract's state.
This contract executes a message call to an address found at storage slot 1. This storage slot can be written to by calling the function '_function_0x2776b163'. Generally, it is not recommended to call user-supplied adresses using Solidity's call() construct. Note that attackers might leverage reentrancy attacks to exploit race conditions or manipulate this contract's state.
This contract executes a message call to an address found at storage slot 1. This storage slot can be written to by calling the function `_function_0x2776b163`. Generally, it is not recommended to call user-supplied adresses using Solidity's call() construct. Note that attackers might leverage reentrancy attacks to exploit race conditions or manipulate this contract's state.
"description":"In the function `'withdrawfunds()'` a non-zero amount of Ether is sent to msg.sender.\n\nThere is a check on storage index 1. This storage slot can be written to by calling the function 'crowdfunding()'.",
"description":"In the function `withdrawfunds()` a non-zero amount of Ether is sent to msg.sender.\n\nThere is a check on storage index 1. This storage slot can be written to by calling the function `crowdfunding()`.",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking. ",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking. ",
"function":"_function_0x546455b5",
"type":"Informational",
"address":446,
@ -15,7 +15,7 @@
},
{
"title":"Exception state",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking. ",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking. ",
"function":"_function_0x92dd38ea",
"type":"Informational",
"address":484,
@ -26,7 +26,7 @@
},
{
"title":"Exception state",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking. ",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking. ",
"function":"_function_0xa08299f1",
"type":"Informational",
"address":506,
@ -37,7 +37,7 @@
},
{
"title":"Exception state",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking. ",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking. ",
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
In *<TESTDATA>/inputs/exceptions.sol:16*
@ -20,7 +20,7 @@ assert(input != 23)
- PC address: 484
### Description
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
In *<TESTDATA>/inputs/exceptions.sol:34*
@ -34,7 +34,7 @@ myarray[index]
- PC address: 506
### Description
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
In *<TESTDATA>/inputs/exceptions.sol:24*
@ -48,7 +48,7 @@ In *<TESTDATA>/inputs/exceptions.sol:24*
- PC address: 531
### Description
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
--------------------
In file: <TESTDATA>/inputs/exceptions.sol:16
@ -16,7 +16,7 @@ Type: Informational
Contract: Exceptions
Function name: _function_0x92dd38ea
PC address: 484
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
--------------------
In file: <TESTDATA>/inputs/exceptions.sol:34
@ -29,7 +29,7 @@ Type: Informational
Contract: Exceptions
Function name: _function_0xa08299f1
PC address: 506
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
--------------------
In file: <TESTDATA>/inputs/exceptions.sol:24
@ -42,7 +42,7 @@ Type: Informational
Contract: Exceptions
Function name: _function_0xb34c3610
PC address: 531
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
"description":"In the function `'_function_0x8a4068dd'` a non-zero amount of Ether is sent to msg.sender.\nIt seems that this function can be called without restrictions.",
"description":"In the function `_function_0x8a4068dd` a non-zero amount of Ether is sent to msg.sender.\nIt seems that this function can be called without restrictions.",
"description":"In the function `'_function_0x4229616d'` a non-zero amount of Ether is sent to an address taken from storage slot 5.\nThere is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.\n\nThere is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.\nThere is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.",
"description":"In the function `_function_0x4229616d` a non-zero amount of Ether is sent to an address taken from storage slot 5.\nThere is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.\n\nThere is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.\nThere is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.",
"function":"_function_0x4229616d",
"type":"Warning",
"address":1599,
@ -15,7 +15,7 @@
},
{
"title":"Ether send",
"description":"In the function `'_function_0x686f2c90'` a non-zero amount of Ether is sent to an address taken from storage slot 5.\nThere is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.\n\nThere is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.\nThere is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.",
"description":"In the function `_function_0x686f2c90` a non-zero amount of Ether is sent to an address taken from storage slot 5.\nThere is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.\n\nThere is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.\nThere is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.",
"function":"_function_0x686f2c90",
"type":"Warning",
"address":1940,
@ -26,7 +26,7 @@
},
{
"title":"Exception state",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking. ",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking. ",
"function":"_function_0x57d4021b",
"type":"Informational",
"address":1653,
@ -37,7 +37,7 @@
},
{
"title":"Exception state",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking. ",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking. ",
In the function `'_function_0x4229616d'` a non-zero amount of Ether is sent to an address taken from storage slot 5.
There is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.
In the function `_function_0x4229616d` a non-zero amount of Ether is sent to an address taken from storage slot 5.
There is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.
There is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.
There is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.
There is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.
There is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.
In *<TESTDATA>/inputs/rubixi.sol:93*
@ -24,11 +24,11 @@ creator.send(feesToCollect)
- PC address: 1940
### Description
In the function `'_function_0x686f2c90'` a non-zero amount of Ether is sent to an address taken from storage slot 5.
There is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.
In the function `_function_0x686f2c90` a non-zero amount of Ether is sent to an address taken from storage slot 5.
There is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.
There is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.
There is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.
There is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.
There is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.
In *<TESTDATA>/inputs/rubixi.sol:75*
@ -42,7 +42,7 @@ creator.send(collectedFees)
- PC address: 1653
### Description
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
In *<TESTDATA>/inputs/rubixi.sol:131*
@ -56,7 +56,7 @@ participants[payoutOrder]
- PC address: 2085
### Description
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
In the function `'_function_0x4229616d'` a non-zero amount of Ether is sent to an address taken from storage slot 5.
There is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.
In the function `_function_0x4229616d` a non-zero amount of Ether is sent to an address taken from storage slot 5.
There is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.
There is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.
There is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.
There is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.
There is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.
--------------------
In file: <TESTDATA>/inputs/rubixi.sol:93
@ -20,11 +20,11 @@ Type: Warning
Contract: Rubixi
Function name: _function_0x686f2c90
PC address: 1940
In the function `'_function_0x686f2c90'` a non-zero amount of Ether is sent to an address taken from storage slot 5.
There is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.
In the function `_function_0x686f2c90` a non-zero amount of Ether is sent to an address taken from storage slot 5.
There is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.
There is a check on storage index 5. This storage slot can be written to by calling the function '_function_0x67f809e9'.
There is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.
There is a check on storage index 5. This storage slot can be written to by calling the function `_function_0x67f809e9`.
There is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.
--------------------
In file: <TESTDATA>/inputs/rubixi.sol:75
@ -37,7 +37,7 @@ Type: Informational
Contract: Rubixi
Function name: _function_0x57d4021b
PC address: 1653
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
--------------------
In file: <TESTDATA>/inputs/rubixi.sol:131
@ -50,7 +50,7 @@ Type: Informational
Contract: Rubixi
Function name: _function_0x9dbc4f9b
PC address: 2085
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
"title":"Dependence on predictable environment variable",
"description":"In the function `'_function_0xe9874106'` the following predictable state variables are used to determine Ether recipient:\n- block.coinbase\n",
"description":"In the function `_function_0xe9874106` the following predictable state variables are used to determine Ether recipient:\n- block.coinbase\n",
"function":"_function_0xe9874106",
"type":"Warning",
"address":1285,
@ -15,7 +15,7 @@
},
{
"title":"Ether send",
"description":"In the function `'_function_0xe9874106'` a non-zero amount of Ether is sent to an address taken from storage slot 0.\nThere is a check on storage index 0. This storage slot can be written to by calling the function 'fallback'.\n\nThere is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.\nThere is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.",
"description":"In the function `_function_0xe9874106` a non-zero amount of Ether is sent to an address taken from storage slot 0.\nThere is a check on storage index 0. This storage slot can be written to by calling the function `fallback`.\n\nThere is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.\nThere is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.",
"function":"_function_0xe9874106",
"type":"Warning",
"address":1285,
@ -26,7 +26,7 @@
},
{
"title":"Exception state",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking. ",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking. ",
"function":"fallback",
"type":"Informational",
"address":356,
@ -37,7 +37,7 @@
},
{
"title":"Exception state",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking. ",
"description":"A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking. ",
In the function `'_function_0xe9874106'` the following predictable state variables are used to determine Ether recipient:
In the function `_function_0xe9874106` the following predictable state variables are used to determine Ether recipient:
- block.coinbase
@ -22,11 +22,11 @@ winningAddress.transfer(prize)
- PC address: 1285
### Description
In the function `'_function_0xe9874106'` a non-zero amount of Ether is sent to an address taken from storage slot 0.
There is a check on storage index 0. This storage slot can be written to by calling the function 'fallback'.
In the function `_function_0xe9874106` a non-zero amount of Ether is sent to an address taken from storage slot 0.
There is a check on storage index 0. This storage slot can be written to by calling the function `fallback`.
There is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.
There is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.
There is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.
There is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.
In *<TESTDATA>/inputs/weak_random.sol:47*
@ -40,7 +40,7 @@ winningAddress.transfer(prize)
- PC address: 356
### Description
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
In *<TESTDATA>/inputs/weak_random.sol:11*
@ -54,7 +54,7 @@ prize / totalTickets
- PC address: 146
### Description
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
In the function `'_function_0xe9874106'` the following predictable state variables are used to determine Ether recipient:
In the function `_function_0xe9874106` the following predictable state variables are used to determine Ether recipient:
- block.coinbase
--------------------
@ -18,11 +18,11 @@ Type: Warning
Contract: WeakRandom
Function name: _function_0xe9874106
PC address: 1285
In the function `'_function_0xe9874106'` a non-zero amount of Ether is sent to an address taken from storage slot 0.
There is a check on storage index 0. This storage slot can be written to by calling the function 'fallback'.
In the function `_function_0xe9874106` a non-zero amount of Ether is sent to an address taken from storage slot 0.
There is a check on storage index 0. This storage slot can be written to by calling the function `fallback`.
There is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.
There is a check on storage index 1. This storage slot can be written to by calling the function 'fallback'.
There is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.
There is a check on storage index 1. This storage slot can be written to by calling the function `fallback`.
--------------------
In file: <TESTDATA>/inputs/weak_random.sol:47
@ -35,7 +35,7 @@ Type: Informational
Contract: WeakRandom
Function name: fallback
PC address: 356
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
--------------------
In file: <TESTDATA>/inputs/weak_random.sol:11
@ -48,7 +48,7 @@ Type: Informational
Contract: WeakRandom
Function name: _function_0xe9874106
PC address: 146
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that assert() should only be used to check invariants. Use require() for regular input checking.
A reachable exception (opcode 0xfe) has been detected. This can be caused by type errors, division by zero, out-of-bounds array access, or assert violations. This is acceptable in most situations. Note however that `assert()` should only be used to check invariants. Use `require()` for regular input checking.
Dr. Sergey Pogodin
7 years ago