* #1066 Switched to use unprefixed hex strings for memory and stack values
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Disable flaky tests per Ben Burns(Yeti) request
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Revert last commit and enable ignored tests.
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1157 - updated to create 2 agents so that proper bonding can occur
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1162 - Updated test to mock the local peer PING packet creation so that the hash can be managed.
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Added admin_logsRepairCache end point
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Added admin_logsRepairCache end point
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Remove p2p network code per PR comments
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Updates from PR comments
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Spotless Apply fixes
Signed-off-by: David Mechler <david.mechler@consensys.net>
* PR updates
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Admin force cache refresh when called through end point per PR comments
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Pr updates
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Update changelog for 1.5.1
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Remove check for 0x prefix on addresses to match expectations
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Update graphql pending to allow for sorting of transactions
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Add Miner data endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Add Miner data endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Add Miner data endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Added tests for new miner endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 Initial changes for EIP-2565
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 - PR updates
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 Initial changes for EIP-2565
Signed-off-by: David Mechler <david.mechler@consensys.net>
* SpotlessApply updtes
Signed-off-by: David Mechler <david.mechler@consensys.net>
* SpotlessApply updtes
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 Initial changes for EIP-2565
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 Initial changes for EIP-2565
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 Initial changes for EIP-2565
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 Initial changes for EIP-2565
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 - Added tests for precompiled contract and for byzantium and berlin gas values
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 Initial changes for EIP-2565
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 Initial changes for EIP-2565
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 - Added tests for precompiled contract and for byzantium and berlin gas values
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 Initial changes for EIP-2565
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 Initial changes for EIP-2565
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 - Added tests for precompiled contract and for byzantium and berlin gas values
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1086 - PR updates
Signed-off-by: David Mechler <david.mechler@consensys.net>
Co-authored-by: David Mechler <davemec@users.noreply.github.com>
The reason this existed in the first place was only because the author
wanted to impact the existing code as little as possible and so copied
analogous classes. However, this class didn't make sense in the context
of the eth65 changes because there isn't size-in-bytes limiting logic,
only an implementaion-specific max-count logic that can easily fit in
the sender class. The tests were deleted because we already have
coverage of the 4096 batch size in PendingTransactionsMessageSenderTest.
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
* #1066 Switched to use unprefixed hex strings for memory and stack values
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Disable flaky tests per Ben Burns(Yeti) request
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Revert last commit and enable ignored tests.
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1157 - updated to create 2 agents so that proper bonding can occur
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1162 - Updated test to mock the local peer PING packet creation so that the hash can be managed.
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Added admin_logsRepairCache end point
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Added admin_logsRepairCache end point
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Remove p2p network code per PR comments
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Updates from PR comments
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Spotless Apply fixes
Signed-off-by: David Mechler <david.mechler@consensys.net>
* PR updates
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Admin force cache refresh when called through end point per PR comments
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Pr updates
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Update changelog for 1.5.1
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Remove check for 0x prefix on addresses to match expectations
Signed-off-by: David Mechler <david.mechler@consensys.net>
* Update graphql pending to allow for sorting of transactions
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Add Miner data endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Add Miner data endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Add Miner data endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 Added tests for new miner endpoints
Signed-off-by: David Mechler <david.mechler@consensys.net>
* #1408 - PR updates
Signed-off-by: David Mechler <david.mechler@consensys.net>
* SpotlessApply updtes
Signed-off-by: David Mechler <david.mechler@consensys.net>
* SpotlessApply updtes
Signed-off-by: David Mechler <david.mechler@consensys.net>
Co-authored-by: David Mechler <davemec@users.noreply.github.com>
The current formulation of the decode can hide exceptions if the finally
block does not complete. Since exceptions are thrown mid-rlp processing
this typically results in the list not being fully consumed and the real
exception is hidden by a "not at end of list" exception.
This more verbose form prevents such exceptions from being overruled by
rlp processing errors.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Make `TargetingGasLimitCalculator` respect the rule that a gas _delta_ can be no more than floor(previous_gas/1024)
Signed-off-by: Atkins <atkinschang@gmail.com>
To provide more context to admins and to add more meaning the full sync
log lines report the amount of gas processed in MegaGas/Second. Some
blocks are fuller than others and this provides a gauge as to wether the
import is slowing down or if the blocks are filling up.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
* use Ip consistently
* changed ip field from bytes to string
Signed-off-by: Sally MacFarlane <sally.macfarlane@consensys.net>
Co-authored-by: mark-terry <36909937+mark-terry@users.noreply.github.com>
Update the besu-native libraries to 0.3.0 to gain access to faster BN128
and secp256k1 implementations.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
A few logging statements had errors in the log statement. Either the
parameter wasn't used or it was expecting a formatted logger for errors.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
The parallel task production is by sub-trie, so calling `visitAll` on a
root node will eventually spawn up to 16 tasks (for a hexary trie).
If we marked each sub-trie in its own thread, with no common queue of
tasks, our mark speed would be limited by the sub-trie with the maximum
number of nodes. In practice for the Ethereum mainnet, we see a large
imbalance in sub-trie size so without a common task pool the time in
which there is only 1 thread left marking its big sub-trie would be
substantial.
If we were to leave all threads to produce mark tasks before starting
to mark, we would run out of memory quickly.
If we were to have a constant number of threads producing the mark
tasks with the others consuming them, we would have to optimize the
production/consumption balance.
To get the best of both worlds, the marking executor has a
ThreadPoolExecutor.CallerRunsPolicy which causes the producing tasks to
essentially consume their own mark task immediately when the task queue
is full. The resulting behavior is threads that mark their own sub-trie
until they finish that sub-trie, at which point they switch to marking
the sub-trie tasks produced by another thread.
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
Created a new JSON-RPC method miner_changeTargetGasLimit allowing users
to change the targetGasLimit option while besu is running.
Co-authored-by: Terrence Cooke <terrence.s.cooke@gmail.com>
Co-authored-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
The warm address/slot data was not returned to the calling messageFrame
for CREATE[2] calls as it was for CALL series calls.
Also, improve performance by using more efficient copy constructors and
reusing objects were relevant.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
This adds EvmTool to the standard distributions.
In addition, add a property flag that disables the secpk256k1
auto-randomization for just the EvmTool to speed up invocation.
(fixes#1464)
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Prioritize high gas prices during mining. Previously we ordered only by
the order in which the transactions were received. This will increase
expected profit when mining.
Co-authored-by: Joshua Melton <jmelton@lawlogix.com>
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
If a peer exceeds the authorized number of pending blocks, Besu will replace the lowest priority block in the cache from this peer by this new one until the local node sync a new block and maybe purges one of the blocks of this peer.
The highest priority blocks are those that are lowest in block height and then higher priority if they were sent more recently.
Other peers will not be impacted and will be able to continue sending pending blocks.
The cache size limit is the distance between the minimum and maximum value of the BlockPropagationRange parameter. Besu automatically purges blocks outside this range.
Signed-off-by: Karim TAAM <karim.t2am@gmail.com>
Allows nodes in a network to not strictly prefer older peers. This
helps break up impenetrable cliques in small, stable networks (private
networks often fit this description). We generate a random mask for the
lifetime of the process and use that to xor against the nodeId of a
potential peer. The desired behavior of the network is that some of the
nodes will allow the new peer to make an inbound connection but that
peer can't try to farm a nodeId that would make prioritize it over all
other peers in a guaranteed fashion.
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
* Add genesis config parameter ecip1099Block
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add stub for epoch activation config
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add stubs for EtcBesuControllerBuilder
that will handle ECIP 1099 Colibrate Epoch Duration functionality
Signed-off-by: Edward Mack <ed@edwardmack.com>
* introduce EtcHashMinerExecutor
Signed-off-by: Edward Mack <ed@edwardmack.com>
* implement EtcHashMinerExecutor
Signed-off-by: Edward Mack <ed@edwardmack.com>
* remove ecip1099 genesis config option
Signed-off-by: Edward Mack <ed@edwardmack.com>
* apply spotless to code
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add test for Etc Hash epoch calculation
Signed-off-by: Edward Mack <ed@edwardmack.com>
* cleanup comments, apply spotless
Signed-off-by: Edward Mack <ed@edwardmack.com>
* make needed variables final
Signed-off-by: Edward Mack <ed@edwardmack.com>
* update changelog
Signed-off-by: Edward Mack <ed@edwardmack.com>
* refactor code to add epochCalculator to EthHash
As suggested in comment removed EtcHash series of classes to keep
existing controller.
Signed-off-by: Edward Mack <ed@edwardmack.com>
* use gas limit calculator
Signed-off-by: Edward Mack <ed@edwardmack.com>
* fix imports
Signed-off-by: Edward Mack <ed@edwardmack.com>
* run spotless apply
Signed-off-by: Edward Mack <ed@edwardmack.com>
* fix imports
Signed-off-by: Edward Mack <ed@edwardmack.com>
* fix comments
Signed-off-by: Edward Mack <ed@edwardmack.com>
* add ecip1099Block option to asMap method
Signed-off-by: Edward Mack <ed@edwardmack.com>
Updated returned HTTP status code to 200 for JSON-RPC error
Updated tests related to the modified HTTP status code
Signed-off-by: gabrieledm <gabriele.delmonte90@gmail.com>
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Co-authored-by: gabrieledm <gabriele.delmonte90@gmail.com>
GasLimitCalculator is now just an interface. This simplifies the logic
in what was previously GasLimitCalculator but is now
TargetingGasLimitCalculator.
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
Enable eth65 by default for the RC period. This commit should be
reverted if issues are found before the release date.
Signed-off-by: Ratan Rai Sur <ratan.r.sur@gmail.com>
* Prefer `EvmAccount` in interfaces and methods
* Rename `DefaultEvmAccount` to `WrappedEvmAccount`
* Move `UpdateTrackingAccount` to a top level class from an inner class
* Re-type `getTouchedAcounts()` to not use `UpdateTrackingAccount`
* Extract `WorldStateArchive` interface, rename old class
`DefaultWorldStateArchive`
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Add better invalid reason logging.
The EVMTool state-test will add a field in the json result object.
Block transaction processing will log at INFO why the block is invalid
and include the block hash and (if relevant) transaction hash.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
* store warmed addresses and slots i the MessageFrame
* update gas calculations for berlin specific rules
* allow state tests in EVMTool to override the forks.
* retesteth should't broadcast re-orgs
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
Add some Quality of Life changes to reference tests
* ShanghaiLove tests tend to OOM in parallel execution. Exclude them.
* LegacyTests, as generated code, are not subject to SPDX header checks.
Signed-off-by: Danno Ferrin <danno.ferrin@gmail.com>
David Mechler
Ratan (Rai) Sur
Antoine Toulme
Danno Ferrin
Atkins
mark-terry
Sally MacFarlane
matkt
terrencecooke
Abdelhamid Bakhta
Lucas Saldanha
Edward Mack
Stefan Pingel
Raw Pong Ghmoa