besu/docs/Tutorials/Create-Private-Clique-Network.md

Creating a Private Network using Clique (Proof of Authority) Consensus Protocol

A private network provides a configurable network for testing. This private network uses the Clique (Proof of Authority) consensus protocol.

!!!important An Ethereum private network created as described here is isolated but not protected or secure. We recommend running the private network behind a properly configured firewall.

Prerequisites

Pantheon

Curl (or similar web service client)

Steps

The steps to create a private network using Clique are displayed on the right.

1. Create Folders

Each node requires a data directory for the blockchain data. When the node is started, the node key is saved in this directory.

Create directories for your private network, each of the three nodes, and a data directory for each node:

Clique-Network/
├── Node-1
│   ├── data
├── Node-2
│   ├── data
└── Node-3
    ├── data

2. Get Address for Node-1

In Clique networks, the address of at least one initial signer must be included in the genesis file. For this Clique network, we will use Node-1 as the initial signer. This requires obtaining the address for Node-1.

To obtain the address for Node-1, in the Node-1 directory, use the public-key export-address subcommand to write the node address to the specified file (node1Address in this example)

pantheon --data-path=data public-key export-address --to=data/node1Address

pantheon --data-path=data public-key export-address --to=data\node1Address

3. Create Genesis File

The genesis file defines the genesis block of the blockchain (that is, the start of the blockchain). The Clique genesis file includes the address of Node-1 as the initial signer in the extraData field.

All nodes in a network must use the same genesis file.

Copy the following genesis definition to a file called cliqueGenesis.json and save it in the Clique-Network directory:

{
  "config":{
    "chainId":1981,
    "constantinoplefixblock": 0,
    "clique":{
      "blockperiodseconds":15,
      "epochlength":30000
    }
  },
  "coinbase":"0x0000000000000000000000000000000000000000",
  "difficulty":"0x1",

"extraData":"0x0000000000000000000000000000000000000000000000000000000000000000<Node 1 Address>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
  "gasLimit":"0xa00000",
  "mixHash":"0x0000000000000000000000000000000000000000000000000000000000000000",
  "nonce":"0x0",
  "timestamp":"0x5c51a607",
  "alloc": {
      "fe3b557e8fb62b89f4916b721be55ceb828dbd73": {
        "privateKey": "8f2a55949038a9610f50fb23b5883af3b4ecb3c3bb792cbcefbd1542c692be63",
        "comment": "private key and this comment are ignored.  In a real chain, the private key should NOT be stored",
        "balance": "0xad78ebc5ac6200000"
      },
      "627306090abaB3A6e1400e9345bC60c78a8BEf57": {
        "privateKey": "c87509a1c067bbde78beb793e6fa76530b6382a4c0241e5e4a9ec0a0f44dc0d3",
        "comment": "private key and this comment are ignored.  In a real chain, the private key should NOT be stored",
        "balance": "90000000000000000000000"
      },
      "f17f52151EbEF6C7334FAD080c5704D77216b732": {
        "privateKey": "ae6ae8e5ccbfb04590405997ee2d52d2b330726137b875053c36d94e974d162f",
        "comment": "private key and this comment are ignored.  In a real chain, the private key should NOT be stored",
        "balance": "90000000000000000000000"
      }
   },
  "number":"0x0",
  "gasUsed":"0x0",
  "parentHash":"0x0000000000000000000000000000000000000000000000000000000000000000"
}

In extraData, replace <Node 1 Address> with the address for Node-1 excluding the 0x prefix.

!!! example

```json
{
  ...
"extraData":"0x0000000000000000000000000000000000000000000000000000000000000000b9b81ee349c3807e46bc71aa2632203c5b4620340000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
  ...
}
```

!!! warning Do not use the accounts in alloc in the genesis file on mainnet or any public network except for testing.

The private keys are displayed which means the accounts are not secure.  

4. Start First Node as Bootnode

Start Node-1:

pantheon --data-path=data --genesis-file=../cliqueGenesis.json --bootnodes --network-id 123 --rpc-http-enabled --rpc-http-api=ETH,NET,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="all"      

pantheon --data-path=data --genesis-file=..\cliqueGenesis.json --bootnodes --network-id 123 --rpc-http-enabled --rpc-http-api=ETH,NET,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="all"    

The command line specifies:

• No arguments for the --bootnodes option because this is your bootnode
• JSON-RPC API is enabled using the --rpc-http-enabled option
• ETH,NET, and CLIQUE APIs are enabled using the --rpc-http-api option
• All hosts can access the HTTP JSON-RPC API using the --host-whitelist option
• All domains can access the node using the HTTP JSON-RPC API using the --rpc-http-cors-origins option

When the node starts, the enode URL is displayed. Copy the enode URL to specify Node-1 as the bootnode in the following steps.

5. Start Node-2

Start another terminal, change to the Node-2 directory and start Node-2 specifying the Node-1 enode URL copied when starting Node-1 as the bootnode:

pantheon --data-path=data --genesis-file=../cliqueGenesis.json --bootnodes=<Node-1 Enode URL> --network-id 123 --p2p-port=30304 --rpc-http-enabled --rpc-http-api=ETH,NET,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="all" --rpc-http-port=8546     

pantheon --data-path=data --genesis-file=..\cliqueGenesis.json --bootnodes=<Node-1 Enode URL> --network-id 123 --p2p-port=30304 --rpc-http-enabled --rpc-http-api=ETH,NET,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="all" --rpc-http-port=8546     

The command line specifies:

• Different port to Node-1 for P2P peer discovery using the --p2p-port option.
• Different port to Node-1 for HTTP JSON-RPC using the --rpc-http-port option.
• Enode URL for Node-1 using the --bootnodes option.
• Data directory for Node-2 using the --data-path option.
• Other options as for Node-1.

6. Start Node-3

Start another terminal, change to the Node-3 directory and start Node-3 specifying the Node-1 enode URL copied when starting Node-1 as the bootnode:

pantheon --data-path=data --genesis-file=../cliqueGenesis.json --bootnodes=<Node-1 Enode URL> --network-id 123 --p2p-port=30305 --rpc-http-enabled --rpc-http-api=ETH,NET,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="all" --rpc-http-port=8547    

pantheon --data-path=data --genesis-file=..\cliqueGenesis.json --bootnodes=<Node-1 Enode URL> --network-id 123 --p2p-port=30305 --rpc-http-enabled --rpc-http-api=ETH,NET,CLIQUE --host-whitelist="*" --rpc-http-cors-origins="all" --rpc-http-port=8547    

The command line specifies:

• Different port to Node-1 and Node-2 for P2P peer discovery using the --p2p-port option.
• Different port to Node-1 and Node-2 for HTTP JSON-RPC using the --rpc-http-port option.
• Data directory for Node-3 using the --data-path option.
• Bootnode as for Node-2.
• Other options as for Node-1.

7. Confirm Private Network is Working

Start another terminal, use curl to call the JSON-RPC API net_peerCount method and confirm the nodes are functioning as peers:

curl -X POST --data '{"jsonrpc":"2.0","method":"net_peerCount","params":[],"id":1}' localhost:8545

The result confirms Node-1 has two peers (Node-2 and Node-3):

{
  "jsonrpc" : "2.0",
  "id" : 1,
  "result" : "0x2"
}

Next Steps

Look at the logs displayed to confirm Node-1 is producing blocks and Node-2 and Node-3 are importing blocks.

Use the Clique API to add Node-2 or Node-3 as a signer.

!!! note To add Node-2 or Node-3 as a signer you need the node address as when specifying Node-1 as the initial signer.

Import accounts to MetaMask and send transactions as described in the Private Network Quickstart Tutorial

!!! info Pantheon does not implement private key management.

Stop Nodes

When finished using the private network, stop all nodes using ++ctrl+c++ in each terminal window.

!!!tip To restart the Clique network in the future, start from 4. Start First Node as Bootnode.