20 KiB
description: Pantheon commande line interface reference
Pantheon Command Line
!!! important "Breaking Changes in v0.9" In v0.9, changes will be made to the command line options to improve usability. These will be breaking changes; that is, in many cases the v0.8 command line options will no longer work. This reference and the rest of the documentation will be updated to reflect these changes. Any further information required about the changes will be included in the v0.9 release notes.
This reference describes the syntax of the Pantheon Command Line Interface (CLI) options and subcommands.
pantheon [OPTIONS] [COMMAND]
Runs the Pantheon Ethereum full node client.
!!!tip Use a configuration file to save the command line options in a file.
Options
accounts-whitelist
--accounts-whitelist[=<hex string of account public key>[,<hex string of account public key>...]...
--accounts-whitelist=[0xfe3b557e8fb62b89f4916b721be55ceb828dbd73, 0x627306090abaB3A6e1400e9345bC60c78a8BEf57]
Comma separated account public keys for permissioned transactions. You can specify an empty list.
!!!note Permissioning is under development and will be available in v1.0.
banned-node-ids
--banned-node-ids=<bannedNodeId>[,<bannedNodeId>...]...
--banned-nodeids=0xc35c3...d615f,0xf42c13...fc456
banned-nodeids=["0xc35c3...d615f","0xf42c13...fc456"]
List of node IDs with which this node will not peer. The node ID is the public key of the node. You can specify the banned node IDs with or without the 0x prefix.
!!!info This option is only available from v0.8.2.
!!!tip
The singular --banned-node-id and plural --banned-node-ids are available and are just two
names for the same option.
bootnodes
--bootnodes[=<enode://id@host:port>[,<enode://id@host:port>...]...]
--bootnodes=enode://c35c3...d615f@1.2.3.4:30303,enode://f42c13...fc456@1.2.3.5:30303
bootnodes=["enode://c35c3...d615f@1.2.3.4:30303","enode://f42c13...fc456@1.2.3.5:30303"]
--bootnodes
List of comma-separated enode URLs for P2P discovery bootstrap.
When connecting to mainnet or public testnets, the default is a predefined list of enode URLs. Specify bootnodes when connecting to a private network.
!!! note Specifying a node is a bootnode must be done on the command line not in a configuration file.
config-file
--config-file=<FILE>
--config=/home/me/me_node/config.toml
The path to the TOML configuration file.
The default is none.
!!!note This option is not used when running Pantheon from the Docker image or in a configuration file.
data-path
--data-path=<PATH>
--data-path=/home/me/me_node
data-path="/home/me/me_node"
The path to the Pantheon data directory. The default is the /build/distributions/pantheon-<version> directory in the Pantheon installation directory.
!!!note This option is not used when running Pantheon from the Docker image.
dev-mode
!!!important
This option is deprecated in favor of the new --network option.
It will be completely removed in the 0.9 release.
--dev-mode
dev-mode=true
Set this option to true to run in development mode.
For example, specify this option to perform CPU mining more easily in a private test network.
In development mode, a custom genesis configuration specifies the chain ID.
When using this option, also set the --network-id option to the network you use for development.
Default is false.
!!!note
The --dev-mode option overrides the --genesis option. If both are specified, the development mode configuration is used.
genesis-file
--genesis-file=<FILE>
--genesis-file=/home/me/me_node/customGenesisFile.json
genesis-file="/home/me/me_node/customGenesisFile.json"
The path to the genesis file. The default is the embedded genesis file for the Ethereum mainnet.
When using this option, it is recommended to also set the --network-id option.
!!!note This option is not used when running Pantheon from the Docker image.
!!!note
The --genesis option is overridden by the --dev-mode option.
If both are specified, the specified genesis file is ignored and the development mode configuration used.
goerli
!!!important
This option is deprecated in favor of the new --network option.
It will be completely removed in the 0.9 release.
--goerli
goerli=true
Uses the Goerli test network. Default is false.
!!!note This option is only available from v0.8.3.
host-whitelist
--host-whitelist=<hostname>[,<hostname>...]... or * or all
--host-whitelist=medomain.com,meotherdomain.com
host-whitelist=["medomain.com", "meotherdomain.com"]
Comma-separated list of hostnames to allow access to the HTTP JSON-RPC API. Default is localhost.
!!!tip
To allow all hostnames, use * or all. We don't recommend allowing all hostnames for production code.
!!!note This option is only available from v0.8.3. Earlier versions allow access by all hostnames.
max-peers
--max-peers=<INTEGER>
--max-peers=42
max-peers=42
Specifies the maximum P2P peer connections that can be established. The default is 25.
max-trailing-peers
!!!important This option is deprecated in favor of a intelligent default setting and will be removed in 0.9 release.
--max-trailing-peers=<INTEGER>
--max-trailing-peers=2
max-trailing-peers=2
Specifies the maximum P2P peer connections for peers that are trailing behind the local chain head.
The default is unlimited but the number of trailing peers cannot exceed the value specified by --max-peers.
metrics-enabled
--metrics-enabled
metrics-enabled=true
Set to true to enable the Prometheus monitoring service to access Pantheon metrics.
The default is false.
metrics-host
--metrics-host=<HOST>
--metrics-host=127.0.0.1
metrics-host="127.0.0.1"
Specifies the host on which the Prometheus monitoring service accesses Pantheon
metrics. The default is 127.0.0.1. The metrics server respects the --host-whitelist option.
metrics-port
--metrics-port=<PORT>
--metrics-port=6174
metrics-port="6174"
Specifies the port on which the Prometheus monitoring service accesses Pantheon
metrics. The default is 9545. The metrics server respects the --host-whitelist option.
miner-coinbase
--miner-coinbase=<Ethereum account address>
--miner-coinbase=fe3b557e8fb62b89f4916b721be55ceb828dbd73
--miner-coinbase="0xfe3b557e8fb62b89f4916b721be55ceb828dbd73"
Account to which mining rewards are paid.
You must specify a valid coinbase when you enable mining using the --miner-enabled
option or the miner_start JSON RPC-API method.
!!!note This option is ignored in networks using the Clique Proof-of-Authority (PoA) consensus protocol.
miner-enabled
--miner-enabled
miner-enabled=true
Enables mining when the node is started.
Default is false.
miner-extra-data
--miner-extra-data=<Extra data>
--miner-extra-data=0x444F4E27542050414E4943202120484F444C2C20484F444C2C20484F444C2021
miner-extra-data="0x444F4E27542050414E4943202120484F444C2C20484F444C2C20484F444C2021"
A hex string representing the 32 bytes to be included in the extra data field of a mined block. The default is 0x.
min-gas-price
--min-gas-price=<minTransactionGasPrice>
--min-gas-price=1337
min-gas-price="1337"
The minimum price that a transaction offers for it to be included in a mined block. The default is 1000.
network-id
!!!important
This option is deprecated in favor of the new --network option.
It will be completely removed in the 0.9 release.
--network-id=<INTEGER>
--network-id=8675309
network-id="8675309"
P2P network identifier.
The default is set to mainnet with value 1.
no-discovery
--no-discovery
no-discovery=true
Disables P2P peer discovery.
The default is false.
node-private-key-file
--node-private-key-file=<FILE>
--node-private-key-file=/home/me/me_node/myPrivateKey
node-private-key-file="/home/me/me_node/myPrivateKey"
<FILE> is the path of the private key file of the node.
The default is the key file in the data directory.
If no key file exists, a key file containing the generated private key is created;
otherwise, the existing key file specifies the node private key.
!!!attention The private key is not encrypted.
!!!note This option is only available from v0.8.2.
nodes-whitelist
--nodes-whitelist[=<enode://id@host:port>[,<enode://id@host:port>...]...]
--nodes-whitelist=enode://c35c3...d615f@3.14.15.92:30303,enode://f42c13...fc456@65.35.89.79:30303
nodes-whitelist=["enode://c35c3...d615f@3.14.15.92:30303","enode://f42c13...fc456@65.35.89.79:30303"]
Comma-separated enode URLs for permissioned networks. Not intended for use with mainnet or public testnets.
!!!note This option is only available from v0.8.3.
!!!note Permissioning is under development and will be available in v1.0.
ottoman
!!!important
This option is deprecated in favor of the new --network option.
It will be completely removed in the 0.9 release.
--ottoman
ottoman=true
Synchronize against the Ottoman test network. This is only useful if you are using an IBFT genesis file. The default is false.
!!!note 🚧 IBFT is not currently supported. Support for IBFT is in active development.
p2p-host
--p2p-host=<HOST>
# to listen on all interfaces
--p2p-host=0.0.0.0
p2p-host="0.0.0.0"
Specifies the host on which P2P peer discovery listens. The default is 127.0.0.1.
!!!note This option is not used when running Pantheon from the Docker image.
p2p-port
--p2p-port=<PORT>
# to listen on port 1789
--p2p-port=1789
p2p-port="1789"
Specifies the port on which P2P peer discovery listens. The default is 30303.
!!!note This option is not used when running Pantheon from the Docker image.
rinkeby
!!!important
This option is deprecated in favor of the new --network option.
It will be completely removed in the 0.9 release.
--rinkeby
rinkeby=true
Uses the Rinkeby test network.
Default is false.
ropsten
!!!important
This option is deprecated in favor of the new --network option.
It will be completely removed in the 0.9 release.
--ropsten
ropsten=true
Uses the Ropsten test network.
Default is false.
!!!note This option is only available only from v0.8.2. For v0.8.1, refer to Starting Pantheon.
rpc-http-enabled
--rpc-http-enabled
rpc-http-enabled=true
Set to true to enable the HTTP JSON-RPC service.
The default is false.
rpc-http-host
--rpc-http-host=<HOST>
# to listen on all interfaces
--rpc-http-host=0.0.0.0
rpc-http-host="0.0.0.0"
Specifies the host on which HTTP JSON-RPC listens. The default is 127.0.0.1.
!!!note This option is not used when running Pantheon from the Docker image.
rpc-http-port
--rpc-http-port=<PORT>
# to listen on port 3435
--rpc-http-port=3435
rpc-http-port="3435"
Specifies the port on which HTTP JSON-RPC listens. The default is 8545.
!!!note This option is not used when running Pantheon from the Docker image.
rpc-http-api
--rpc-http-api=<api name>[,<api name>...]...
--rpc-http-api=ETH,NET,WEB3
rpc-http-api=["ETH","NET","WEB3"]
Comma-separated APIs to enable on the HTTP JSON-RPC channel.
When you use this option, the --rpc-http-enabled option must also be specified.
The available API options are: ADMIN, ETH, NET, WEB3, CLIQUE, IBFT, DEBUG, and MINER.
The default is: ETH, NET, WEB3, CLIQUE, IBFT.
!!!note 🚧 IBFT is not currently supported. Support for IBFT is in active development.
!!!tip
The singular --rpc-http-api and plural --rpc-http-apis are available and are just two
names for the same option.
rpc-http-cors-origins
--rpc-http-cors-origins=<url>[,<url>...]... or all or *
# You can whitelist one or more domains with a comma-separated list.
--rpc-http-cors-origins="http://medomain.com","https://meotherdomain.com"
rpc-http-cors-origins=["http://medomain.com","https://meotherdomain.com"]
# The following allows Remix to interact with your Pantheon node without using MetaMask.
--rpc-http-cors-origins="http://remix.ethereum.org"
Specifies domain URLs for CORS validation. Domain URLs must be enclosed in double quotes and comma-separated.
Listed domains will be allowed access to node data (whitelisted). If your client interacts with Pantheon using a browser app (such as Remix using a direct connection or a block explorer), you must whitelist the client domains.
The default value is "none".
If you don't whitelist any domains, you won't be able to use webapps to interact with your Pantheon node.
!!!note MetaMask runs as native code so does not require CORS validation. If Remix is connecting to the node through MetaMask, it also does not require CORS validation.
!!!tip
For development purposes, you can use "all" or "*" to accept requests from any domain,
but we don't recommend this for production code.
rpc-ws-enabled
--rpc-ws-enabled
rpc-ws-enabled=true
Set to true to enable the WebSockets JSON-RPC service.
The default is false.
rpc-ws-api
--rpc-ws-api=<api name>[,<api name>...]...
--rpc-ws-api=ETH,NET,WEB3
rpc-ws-api=["ETH","NET","WEB3"]
Comma-separated APIs to enable on Websockets channel.
When you use this option, the --rpc-ws-enabled option must also be specified.
The available API options are: ETH, NET, WEB3, CLIQUE, IBFT, DEBUG, and MINER.
The default is: ETH, NET, WEB3, CLIQUE, IBFT.
!!!note 🚧 IBFT is not currently supported. Support for IBFT is in active development.
!!!tip
The singular --rpc-ws-api and plural --rpc-ws-apis are available and are just two
names for the same option.
rpc-ws-host
--ws-host=<HOST>
# to listen on all interfaces
--ws-host=0.0.0.0
ws-host="0.0.0.0"
Host for Websocket WS-RPC to listen on. The default is 127.0.0.1.
!!!note This option is not used when running Pantheon from the Docker image.
rpc-ws-port
--ws-port=<PORT>
# to listen on port 6174
--ws-port=6174
ws-port="6174"
Port for Websocket WS-RPC to listen on. The default is 8546.
!!!note This option is not used when running Pantheon from the Docker image.
rpc-ws-refresh-delay
--rpc-ws-refresh-delay=<refresh delay>
--rpc-ws-refresh-delay="10000"
Refresh delay for Websocket synchronizing subscription in milliseconds. The default is 5000.
help
-h, --help
Show the help message and exit.
logging
-l, --logging=<LEVEL>
--logging=DEBUG
logging="DEBUG"
Sets the logging verbosity.
Log levels are OFF, FATAL, WARN, INFO, DEBUG, TRACE, ALL.
Default is INFO.
version
-V, --version
Print version information and exit.
Commands
Pantheon subcommands are:
blocks
This command provides blocks related actions.
import
$ pantheon blocks import --from=<block-file>
$ pantheon blocks import --from=/home/me/me_project/mainnet.blocks
Imports blocks from the specified file into the blockchain database
public-key
This command provides node public key related actions.
export
$ pantheon public-key export --to=<key-file>
$ pantheon public-key export --to=/home/me/me_project/not_precious_pub_key
Exports node public key to the specified file.