* fix allowed txs to be able to handle multiple txs for same from address (#4624)
* [HOTFIX] fix leader crosslink issue to not include old cross link in the propo… (#4629)
* fix leader crosslink issue to not include old cross link in the proposing block
* set higher epoch threshold for pending crosslinks to be added to proposing block
* delete old pending cross links
* delete when proposing
* delete when proposing
* delete when proposing
* delete when proposing
* minor logic change for the log
* minor logic change for the log
* minor logic change for the log
* minor logic change for the log
---------
Co-authored-by: Diego Nava <diego.nava77@hotmail.com>
* Fix for possible panic. (#4627)
* Fix, removed duplicated check.
---------
Co-authored-by: Gheis Mohammadi <Gheis.Mohammadi@gmail.com>
Co-authored-by: Diego Nava <diego.nava77@hotmail.com>
Co-authored-by: Konstantin <355847+Frozen@users.noreply.github.com>
* fix leader crosslink issue to not include old cross link in the proposing block
* set higher epoch threshold for pending crosslinks to be added to proposing block
* delete old pending cross links
* delete when proposing
* delete when proposing
* delete when proposing
* delete when proposing
* minor logic change for the log
* minor logic change for the log
* minor logic change for the log
* minor logic change for the log
---------
Co-authored-by: Diego Nava <diego.nava77@hotmail.com>
* fix allowed txs to be able to handle multiple txs for same from address
* improve tx data checking for allowed txs
Co-authored-by: Diego Nava <8563843+diego1q2w@users.noreply.github.com>
---------
Co-authored-by: Diego Nava <8563843+diego1q2w@users.noreply.github.com>
* fix null snapshot issue in chain helper's state sync new functions
* add WriteHeaderNumber to writeHeadBlock
* improve CurrentBlockNumberto handle unsaved new pivot
* fix null response data for full state sync
* add log for zero task in state worker loop
* adjust full state sync request parameters, rename stage_state
* add full state stage to the list of stages in fast sync
* add RangeMode and ChainExecutionMode to handle execution of the stream sync stage
* fix block exists issue on stage_states in stream sync
* fix double insertion in stage states
* add count for state downloader to return number of tasks
* fix travis build issue by goimports
* switch to Full Sync on pivot block, fix checking nil length in HandleRequestError
* test: add delegation type tests
These were skipped intentionally in the previous pull request
* rpc: undo all changes to 2023.3.0
* rpc: calculate SenderAddress before `ConvertToEth`
`tx.ConvertToEth` silently drops the `ShardID` and `ToShardID` fields.
This results in the hash of the transaction changing (either via removal
of these fields in the hash calculation or by automatic filling of the
values by the node's shard). The different hash calculation results in
incorrect sender address calculation.
There have been a couple of attempts to fix this issue, which created
troubles elsewhere. This pull request reverts to the behaviour seen in
2023.3.0 with a simple edit that calculates the `SenderAddress` before
dropping the fields in the call to `ConvertToEth`.
* Fix: max rate issue (#4580)
* fix: max-rate bellow the era min-rate
* fix comments
* add localnet epoch config
* update config
* update config
* update config
* update config
* add log
* remove hip30 from localnet
* disable localnet config
* engine: actually fix the 7% fee implementation
* rpc: fix transaction receipt format for eth
use the same receipt as `hmyv2_`. using a boolean variable, decide if
the addresses need to be converted to bech32. do not return a contract
address unless a contract was actually deployed in the transaction by
using a pointer address type.
* rpc: add comment indicating function is unused
with the switch to `v2.NewReceipt` for even `eth_` queries, the
`eth.NewReceipt` function is no longer used
* build: fix delegation tests
* update comment
blocks was referring to `blocks of code` and not blocks in a chain.
removed the confusing word
* rpc: remove ConvertToEth in GetBlockReceipts
* internal: max rate hard fork schedule
* internal: testnet max rate schedule
---------
Co-authored-by: Diego Nava <8563843+diego1q2w@users.noreply.github.com>
* Fixed debug run for mac. (#4484)
* Fix debug run for mac.
* Next validator in view change. (#4492)
* NthNextValidatorHmy
* Fixed func usage.
* Additional checks.
* HIP-30 Boilerplate (#4495)
* HIP-30: sharding configuration boilerplate
* update test
* update comment
---------
Co-authored-by: Nita Neou (Soph) <soph@harmony.one>
* HIP-30: minimum validator commission of 7% (#4496)
* HIP-30: sharding configuration boilerplate
* update comments
* goimports
* HIP-30: minimum validator commission of 7%
Based on #4495, which must be merged before this PR. This PR should be
rebased with dev after #4495 is merged to retain atomicity of changes by
pull request.
* goimports
* update test
* update test
---------
Co-authored-by: Casey Gardiner <117784577+ONECasey@users.noreply.github.com>
* HIP-30: Emission split (#4497)
* HIP-30: sharding configuration boilerplate
* update comments
* goimports
* HIP-30: minimum validator commission of 7%
Based on #4495, which must be merged before this PR. This PR should be
rebased with dev after #4495 is merged to retain atomicity of changes by
pull request.
* goimports
* HIP-30: Emission split implementation
Note that the allocated split of the emission goes directly to the
recipient (and not via the Reward). This is because rewards are indexed
by validator and not by delegator, and the recipient may/may not have
any delegations which we can reward. Even if one was guaranteed to
exist, it would mess up the math of the validator.
* set up mainnet recipient of emission split
* HIP-30: Emission split addresses for non mainnet
* update test
* Update mainnet.go
---------
Co-authored-by: Casey Gardiner <117784577+ONECasey@users.noreply.github.com>
* HIP-30: Set up pre-image generation, recording, export and import (#4494)
* flags: set up preimage flags
* hip30: set up preimage import, export, api
* save pre-images by default
* add pre images api
* goimports
* commit rpc preimages file
* preimages: re-generate them using CLI
* add metrics and numbers for pre-images
* automate generation after import
* move from rpc to core
* add back core/preimages.go file
* export prometheus metric when no error importing preimage
* add preimages flags to rootflags
---------
Co-authored-by: Nita Neou (Soph) <soph@harmony.one>
* HIP-30: Shard reduction (#4498)
* HIP-30: sharding configuration boilerplate
* update comments
* goimports
* HIP-30: minimum validator commission of 7%
Based on #4495, which must be merged before this PR. This PR should be
rebased with dev after #4495 is merged to retain atomicity of changes by
pull request.
* goimports
* HIP-30: Emission split implementation
Note that the allocated split of the emission goes directly to the
recipient (and not via the Reward). This is because rewards are indexed
by validator and not by delegator, and the recipient may/may not have
any delegations which we can reward. Even if one was guaranteed to
exist, it would mess up the math of the validator.
* set up mainnet recipient of emission split
* HIP-30: Emission split addresses for non mainnet
* HIP-30: deactivate shard 2 and 3 validators
* update test
* shard reduction: update block reward
---------
Co-authored-by: Casey Gardiner <117784577+ONECasey@users.noreply.github.com>
* Fix for index. (#4504)
* Small improvements. (#4477)
* HIP-30: Balance migration (#4499)
* flags: set up preimage flags
* hip30: set up preimage import, export, api
* save pre-images by default
* add pre images api
* goimports
* commit rpc preimages file
* preimages: re-generate them using CLI
* add metrics and numbers for pre-images
* automate generation after import
* move from rpc to core
* add back core/preimages.go file
* HIP-30: sharding configuration boilerplate
* update comments
* HIP-30: minimum validator commission of 7%
Based on #4495, which must be merged before this PR. This PR should be
rebased with dev after #4495 is merged to retain atomicity of changes by
pull request.
* goimports
* HIP-30: Emission split implementation
Note that the allocated split of the emission goes directly to the
recipient (and not via the Reward). This is because rewards are indexed
by validator and not by delegator, and the recipient may/may not have
any delegations which we can reward. Even if one was guaranteed to
exist, it would mess up the math of the validator.
* set up mainnet recipient of emission split
* HIP-30: Emission split addresses for non mainnet
* HIP-30: deactivate shard 2 and 3 validators
* goimports
* update test
* migrate balance uring epoch T - 1
highly untested code. also missing is the ability to generate a
pre-migration report for future verification.
* update test
* export prometheus metric when no error importing preimage
* add comment
* test account migration in localnet
* add preimages flags to rootflags
* enable preimages on the whitelist
* add the generate method
* fix cropping log
* cropping startpoint when bigger than endpoint
* add support for the rpcblocknumer type
* enable import api
* use earlies block
* fix error catching
* make end optional for the comand line
* fix cropping logic
* improve error when apply message fails
* add balance on the error
* fix importing
* remove unused imports
---------
Co-authored-by: Nita Neou (Soph) <soph@harmony.one>
Co-authored-by: Soph <35721420+sophoah@users.noreply.github.com>
Co-authored-by: Diego Nava <diego.nava77@hotmail.com>
Co-authored-by: Diego Nava <8563843+diego1q2w@users.noreply.github.com>
* Hip30 balance migration with fix. (#4502)
* flags: set up preimage flags
* hip30: set up preimage import, export, api
* preimages: re-generate them using CLI
* move from rpc to core
* migrate balance uring epoch T - 1
* test account migration in localnet
* enable preimages on the whitelist
* add the generate method
* fix cropping log
* cropping startpoint when bigger than endpoint
* add support for the rpcblocknumer type
* enable import api
* Fixed stuck.
* Additional logs.
* Rebased on harmony-one:hip30/testing.
* Removed code duplicate.
* Fixed stuck.
* IsOneEpochBeforeHIP30 for only 1 epoch.
---------
Co-authored-by: MaxMustermann2 <82761650+MaxMustermann2@users.noreply.github.com>
Co-authored-by: Nita Neou (Soph) <soph@harmony.one>
Co-authored-by: Diego Nava <diego.nava77@hotmail.com>
Co-authored-by: Diego Nava <8563843+diego1q2w@users.noreply.github.com>
* remove double import
* rename variable
* remove unused fmt
* Fixed imports. (#4507)
* Block gas 30m. (#4501)
* BlockGas30M renamed to BlockGas30MEpoch.
* Removed redundant code.
* Hip30 : localnet account migration fix (#4508)
* flags: set up preimage flags
* hip30: set up preimage import, export, api
* save pre-images by default
* add pre images api
* goimports
* commit rpc preimages file
* preimages: re-generate them using CLI
* add metrics and numbers for pre-images
* automate generation after import
* add back core/preimages.go file
* HIP-30: sharding configuration boilerplate
* update comments
* goimports
* HIP-30: minimum validator commission of 7%
Based on #4495, which must be merged before this PR. This PR should be
rebased with dev after #4495 is merged to retain atomicity of changes by
pull request.
* goimports
* HIP-30: Emission split implementation
Note that the allocated split of the emission goes directly to the
recipient (and not via the Reward). This is because rewards are indexed
by validator and not by delegator, and the recipient may/may not have
any delegations which we can reward. Even if one was guaranteed to
exist, it would mess up the math of the validator.
* set up mainnet recipient of emission split
* HIP-30: Emission split addresses for non mainnet
* HIP-30: deactivate shard 2 and 3 validators
* goimports
* update test
* goimports
* migrate balance uring epoch T - 1
highly untested code. also missing is the ability to generate a
pre-migration report for future verification.
* update test
* export prometheus metric when no error importing preimage
* test account migration in localnet
* add preimages flags to rootflags
* enable preimages on the whitelist
* add the generate method
* fix cropping log
* cropping startpoint when bigger than endpoint
* add support for the rpcblocknumer type
* enable import api
* use earlies block
* debug logs
* fix error catching
* fix error catching
* make end optional for the comand line
* fix cropping logic
* improve error when apply message fails
* add balance on the error
* fix importing
* remove unused imports
* create preimage for genesis block
* fix consensus with No Migration Possible
* use correct header for migration
* process all tx in all block for non shard 0
---------
Co-authored-by: MaxMustermann2 <82761650+MaxMustermann2@users.noreply.github.com>
Co-authored-by: Diego Nava <diego.nava77@hotmail.com>
Co-authored-by: Diego Nava <8563843+diego1q2w@users.noreply.github.com>
* create the sate as the insertchain does
* roll back changes
* use the updated state in case there is one
* use the updated state in case there is one
* add testing fmt
* fix getReceipts rpc issue (#4511)
* pass the correct config
* Fixes.
* reduce the block number count
* add verify preimages rpc method
* write preimages on process
* commit preimages
* commit preimages
* verify root hashes after commit
* send metrics on node start
* send the verified preimages
* correct the starting block
* register the verified address
* flush the db every export and verify
* add shard label
* aggregate the recovery multisig reward (#4514)
* 1) Removed unused worker (#4512)
2) Proper error checking
3) Tests for gas 30m
* Improvements of streamsync to deploy on mainnet (#4493)
* add faultRecoveryThreshold to reset stream failures
* increase MaxStreamFailures to let stream be longer in the list
* set Concurrency to 2 for devnet to be same as MinStreams, otherwise it will rewrite MinStreams
* stream sync loop checks for ErrNotEnoughStreamsand waits for enough streams in case there are not enough connected streams in list
* fix fault recovery issue
* improve checkPrerequisites to be able to continue with minimum streams
* refactor fixValues function, put priority on MinStreams rather than Concurrency
* drop remote peer if sending empty blocks array
* goimports to fix build issue
* fix getReceipts array assignments
* fix getReceipts and add tests for it
* fix duplicate function def
* reset devnet and set 30M epoch for all network except mainnet/testnet (#4517)
* enable on devnet hip28 and hip30 together at hip30
* enable 30M epoch for all except mainnet/testnet, update devnet for restart
* remove unused var
* update partner/devnet feature activation
* Remove old devnet/partner instance config
* reduce the epoch time for devnet to 30 min (#4522)
* add GetNodeData tests for stream client, increase nodes and receipts cap (#4519)
* add tests for GetNodeData in stream protocol
* increase client cap for nodes and receipts requests
* use new(big.Int) so we don't modify the epoch value (#4523)
* add hip30 testing for devnet/partner network (#4525)
* enable hip30 epoch for testnet (#4526)
* enable hip30 epoch for testnet
* fix date comment
* set blockgas30M epoch
* enable hip30 and gas30m epoch for mainnet (#4528)
* fix preimage import bugs (#4529)
* fix preimage import bugs
* Fixed lru cache size. (#4535)
* fix decryptRaw issue for nil/empty data (#4532)
* update deprecated ioutil, improve local accounts (#4527)
* make peer connected/disconnected debug log level (#4537)
* Revert improvements. (#4520)
* Updated go lib p2p deps. (#4538)
* Flush data. (#4536)
* Rotation fix and update. (#4516)
---------
Co-authored-by: Konstantin <355847+Frozen@users.noreply.github.com>
Co-authored-by: Max <82761650+MaxMustermann2@users.noreply.github.com>
Co-authored-by: Nita Neou (Soph) <soph@harmony.one>
Co-authored-by: Soph <35721420+sophoah@users.noreply.github.com>
Co-authored-by: Diego Nava <diego.nava77@hotmail.com>
Co-authored-by: Diego Nava <8563843+diego1q2w@users.noreply.github.com>
Co-authored-by: Gheis Mohammadi <Gheis.Mohammadi@gmail.com>
Co-authored-by: “GheisMohammadi” <36589218+GheisMohammadi@users.noreply.github.com>
Co-authored-by: Adam Androulidakis <37982984+adsorptionenthalpy@users.noreply.github.com>
@ -47,27 +39,27 @@ For macOS, you can reference this [guide](http://tldrdevnotes.com/bash-upgrade-3
## Dev Environment
**Most repos from [harmony-one](https://github.com/harmony-one) assumes the GOPATH convention. More information [here](https://github.com/golang/go/wiki/GOPATH).**
**Most repos from [woop-chain](https://github.com/woop-chain) assumes the GOPATH convention. More information [here](https://github.com/golang/go/wiki/GOPATH).**
### First Install
Clone and set up all of the repos with the following set of commands:
Included in this repo is a Dockerfile that has a full harmony development environment and
Included in this repo is a Dockerfile that has a full woop development environment and
comes with emacs, vim, ag, tig and other creature comforts. Most importantly, it already has the go environment
with our C/C++ based library dependencies (`libbls` and `mcl`) set up correctly for you.
You can build the docker image for yourself with the following commands:
```bash
cd $(go env GOPATH)/src/github.com/harmony-one/harmony
cd $(go env GOPATH)/src/github.com/woop-chain/woop
make clean
docker build -t harmony .
docker build -t woop .
```
> If your build machine has an ARM-based chip, like Apple silicon (M1), the image is built for `linux/arm64` by default. To build for `x86_64`, apply the `--platform` arg like so:
> Learn more about the `--platform` arg and multi-CPU architecture support, [here](https://docs.docker.com/engine/reference/builder/#automatic-platform-args-in-the-global-scope) and [here](https://docs.docker.com/desktop/multi-arch/).
@ -97,26 +89,26 @@ docker build -t harmony .
Then you can start your docker container with the following command:
> Note that the harmony repo will be shared between your docker container and your host machine. However, everything else in the docker container will be ephemeral.
> Note that the woop repo will be shared between your docker container and your host machine. However, everything else in the docker container will be ephemeral.
If you need to open another shell, just do:
```bash
docker exec -it harmony /bin/bash
docker exec -it woop /bin/bash
```
Learn more about docker [here](https://docker-curriculum.com/).
## Build
The `make` command should automatically build the Harmony binary & all dependent libs.
The `make` command should automatically build the Woop binary & all dependent libs.
However, if you wish to bypass the Makefile, first export the build flags:
@ -159,7 +151,7 @@ Note that all test Docker containers bind several ports to the host machine for
* `9798` - Shard 1 Rosetta (for an explorer)
* `9899` - Shard 0 WS for an explorer
* `9898` - Shard 1 WS for an explorer
> This allows you to use curl, hmy CLI, postman, rosetta-cli, etc... on your host machine to play with or probe the localnet that was used for the test.
> This allows you to use curl, wiki CLI, postman, rosetta-cli, etc... on your host machine to play with or probe the localnet that was used for the test.
### Go tests
To run this test, do:
@ -175,7 +167,7 @@ make test-rpc
```
This test starts a localnet (within the Docker container), **ensures it reaches a consensus**, and runs a series of tests to ensure correct RPC behavior.
This test also acts as a preliminary integration test (more thorough tests are done on the testnets).
> The tests ran by this command can be found [here](https://github.com/harmony-one/harmony-test/tree/master/localnet).
> The tests ran by this command can be found [here](https://github.com/woop-chain/woop-test/tree/master/localnet).
If you wish to debug further with the localnet after the tests are done, open a new shell and run:
```bash
@ -183,9 +175,9 @@ make test-rpc-attach
```
> This will open a shell in the docker container that is running the Node API tests.
>
> Note that the docker container has the [Harmony CLI](https://docs.harmony.one/home/wallets/harmony-cli) on path,
> therefore you can use that to debug if needed. For example, one could do `hmy blockchain latest-headers` to check
> the current block height of localnet. Reference the documentation for the CLI [here](https://docs.harmony.one/home/wallets/harmony-cli)
> Note that the docker container has the [Woop CLI](https://docs.wikiwoop.com/home/wallets/woop-cli) on path,
> therefore you can use that to debug if needed. For example, one could do `wiki blockchain latest-headers` to check
> the current block height of localnet. Reference the documentation for the CLI [here](https://docs.wikiwoop.com/home/wallets/woop-cli)
> for more details & commands.
### Rosetta tests
@ -195,7 +187,7 @@ make test-rosetta
```
This test starts a localnet (within the Docker container), **ensures it reaches a consensus**, and runs the Construction & Data API checks using the [rosetta-cli](https://github.com/coinbase/rosetta-cli).
This test also acts as a preliminary integration test (more thorough tests are done on the testnets).
> The config for this test can be found [here](https://github.com/harmony-one/harmony-test/blob/master/localnet/configs/localnet_rosetta_test_s0.json) & [here](https://github.com/harmony-one/harmony-test/blob/master/localnet/configs/localnet_rosetta_test_s1.json)
> The config for this test can be found [here](https://github.com/woop-chain/woop-test/blob/master/localnet/configs/localnet_rosetta_test_s0.json) & [here](https://github.com/woop-chain/woop-test/blob/master/localnet/configs/localnet_rosetta_test_s1.json)
Similar to the RPC tests, if you wish to debug further with the localnet after the tests are done, open a new shell and run:
```bash
@ -204,10 +196,10 @@ make test-rosetta-attach
## License
Harmony is licensed under GNU Lesser General Public License v3.0. See [`LICENSE`](LICENSE) file for
Woop is licensed under GNU Lesser General Public License v3.0. See [`LICENSE`](LICENSE) file for
the terms and conditions.
Harmony includes third-party open-source code. In general, a source subtree
Woop includes third-party open-source code. In general, a source subtree
with a `LICENSE` or `COPYRIGHT` file is from a third party, and our
modifications thereto are licensed under the same third-party open source
license.
@ -216,7 +208,7 @@ Also please see [our Fiduciary License Agreement](FLA.md) if you are
contributing to the project. By your submission of your contribution to us, you
and we mutually agree to the terms and conditions of the agreement.
## Contributing To Harmony
## Contributing To Woop
See [`CONTRIBUTING`](CONTRIBUTING.md) for details.
@ -235,10 +227,3 @@ See [`CONTRIBUTING`](CONTRIBUTING.md) for details.
nico
Soph
Konstantin
Casey Gardiner
Diego Nava
Gheis Mohammadi
Adam Androulidakis
“GheisMohammadi”
static
Max